Rear quarter window installation

[HO455]

I searched but was unable to find any information on installing the side rear windows. Do they go in from the outside in or inside out? Where should one start? Any information would be appreciated.

[LockDoc]

Originally Posted by HO455

I searched but was unable to find any information on installing the side rear windows. Do they go in from the outside in or inside out? Where should one start? Any information would be appreciated.

I installed the rubber around the glass and set it on the bottom lip from the outside, then roped it in just like you would a windshield. You will have to work both bottom corners in as you set it down on the bottom pinchweld. You will need 3 people or you will get into trouble, two on the outside and one on the inside.... I used Vaseline for a lube around the inside because soap dries out too fast. It's a little messy but it worked good....

I use this type of tool along with the 3/16" rope, especially in the corners.

http://www.aegistools.com/windshield...sket-tool.html

Just go slow and work from both directions....

LockDoc

[HO455]

Thanks again LockDoc. Once again you're the man with the answer. I wasn't sure that the thick part on the top would clear the pinchweld if the glass was being installed from the outside.
Thank you sir.
HO455