Firewall cab markings. Jocko, SS-tim

[too much stuff]

I think one of you guys were collecting info about this at one time?
Here is a cab I just got recently. low hump, cab lights, A/C, headliner and cargo light.

Tim, I think there is a plaid burb on the parts board right now...

[bruceman1968]

Thanks TMS, That cab is from the St. Louis assembly plant. Also a Z84 or YE9 trim level. Thanks for posting it.

[too much stuff]

Originally Posted by bruceman1968

Thanks TMS, That cab is from the St. Louis assembly plant. Thanks for posting it.

Was that you collecting that info? There are a couple marks that didn't show up very well. I may have to take a couple better pics. Thought it was odd it had A/C on both sides of the trans area.

[bruceman1968]

Yes, But Tim and Mark have a interest too. We still don't know what the 6 in the middle of the firewall is or the number/letters on the side of the cowl. What year is the cab?

[bruceman1968]

I've seen the double AC before... but often it's just on the passenger side.

[too much stuff]

Originally Posted by bruceman1968

Yes, But Tim and Mark have a interest too. We still don't know what the 6 in the middle of the firewall is or the number/letters on the side of the cowl. What year is the cab?

1972 cab. The 1971 mark is under the cowl. The faded number pic is in the cab where the gas tank would sit.

[57taskforce]

Originally Posted by bruceman1968

Thanks TMS, That cab is from the St. Louis assembly plant. Also a Z84 or YE9 trim level. Thanks for posting it.

I've got a 72 St. Louis cab thats marked all over the place on the fire wall, I could post some pictures if your interested?

[bruceman1968]

Originally Posted by too much stuff

1972 cab. The 1971 mark is under the cowl. The faded number pic is in the cab where the gas tank would sit.

Truck was built toward the end of august in 1971. The faded number is the job number. Your side cowl marking is interesting. Still haven't got that one figured out yet. Several trucks have been posted with markings in that spot. Did your cab come with a SPID. Do you know if it was a Z84 Cheyenne or YE9 Super? 4T shows up on both. Thanks again for posting the pics.

Originally Posted by 57taskforce

I've got a 72 St. Louis cab thats marked all over the place on the fire wall, I could post some pictures if your interested?

Yes please, always fun to see the St. Louis trucks. They were lettered up much more that any of the other assembly plants.

[too much stuff]

Sorry, no SPID...

[57taskforce]

10-4 I'll be moving it this week anyway so I'll snap a few of the fire wall.

[davem815]

Bruceman, i know this is the wrong forum, but do you have any info on 1966 GMC markings? I have some marking i would like to figure out.
Thanks, Dave

[bruceman1968]

Dave, post them up and let's take a look. I have some 66 markings. You have a GMC..was it built at Pontiac or where. You can start a thread on the 60-66 side, if you want and I'll take a look plus several guys over there will also see it. Each assembly plant was different. Some didn't mark them at all.

[davem815]

Thanks bruceman, question posted on 60-66 page, so as not to hijack this thread.

[jocko]

Thanks for sharin these. I think there is a dedicated thread, but can't find it at the moment. On my cell!

[FirstOwner69]

Originally Posted by jocko

Thanks for sharin these. I think there is a dedicated thread, but can't find it at the moment. On my cell!

Here's a thread with a bunch of links to other threads. The one you are probably thinking of is the link in post#2. I think Pete (post 2) and Keith (post 3) have it pretty well covered.
http://67-72chevytrucks.com/vboard/s...rewall+writing