NY WTB Traclock or Powerlock carrier for Dana 60 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**juddss** · 10-13-2016, 07:08 PM

Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

**68350** · 10-13-2016, 07:27 PM

I got mine here off the board for 200. So hopefully someone has one for ya. I got the powerlok in my 71 n 72 gmcs and love it

**w314speed** · 10-13-2016, 07:28 PM

Quote:

Originally Posted by juddss

Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

I have a good one! I will look in the AM, but I think it has new posi clutch dic plates! I will PM with price and info. Thanks, Dan

*randy500* · 10-13-2016, 08:45 PM

Never thought of getting one off here...I need one for my...cough...Dodge Dart! Next in line if anyone has another for sale, after OP of course.

**gmc 2500 4x4** · 10-14-2016, 05:59 AM

i have one or the other i bought off here, and not going to use. but i have 354 ratio and was bought for the swap out. not sure on carrier compatibility. i will figure it out today, i have about 200.00 in this

**w314speed** · 10-14-2016, 07:37 AM

This unit is 30 spline and is good for 3:54 to 4:11 gears. As the pics show, it has all new internal gears and clutch plates. I collected parts and built it for my 72 Custom Camper with Dana 60 and just recently sold it. Obviously, I have more than the $325 plus shipping that I need for it. LMK Thanks, Dan

**juddss** · 10-14-2016, 09:02 AM

GMC 2500 4x4 Let me know
W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

**w314speed** · 10-14-2016, 09:29 AM

Quote:

Originally Posted by juddss

GMC 2500 4x4 Let me know
W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

Sorry! Going back to my 31 spline 67-68 442 performance axles. You are correct at 30 spline for the Dana 60. Thanks, Dan

**68350** · 10-14-2016, 09:35 AM

The factory dana 60 in our trucks should have 30 spline axles, at least in 71/72

**gmc 2500 4x4** · 10-14-2016, 10:17 AM

Well what I have ain't turning. And I don't have 200 in this. I paid 75.00 from Dan. Don't know if it seized or what. It would need gone thru. So no guarantees

**juddss** · 10-14-2016, 10:43 AM

Any pics? Do you have 354 gears as well? What else comes with it?

**gmc 2500 4x4** · 10-14-2016, 01:30 PM

this is what i have, no gears. 10/19/71, spicer#27161x

**juddss** · 10-14-2016, 02:17 PM

Ok so the spiders are seized. What do you want for it.

**gmc 2500 4x4** · 10-14-2016, 07:03 PM

what i paid, 75.00 and shipping

**w314speed** · 10-14-2016, 07:18 PM

The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

*randy500* · 10-14-2016, 10:59 PM

Quote:

Originally Posted by w314speed

The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

I'm interested, what do you have and how much?

**juddss** · 10-15-2016, 03:02 AM

Quote:

Originally Posted by gmc 2500 4x4

what i paid, 75.00 and shipping

You ever come towards Syracuse? I'll think on it tomorrow. I have to research the true track.
Dan how much for ring and pinion. They are used correct?

**w314speed** · 10-15-2016, 04:53 AM

Quote:

Originally Posted by juddss

You ever come towards Syracuse? I'll think on it tomorrow. I have to research the true track.
Dan how much for ring and pinion. They are used correct?

They are used. $125 plus shipping and paypal fees or MO fine. LMK Thanks, Dan

**w314speed** · 10-15-2016, 05:05 AM

Quote:

Originally Posted by randy500

I'm interested, what do you have and how much?

Let JUDDSS and Paul finalize there deal. I sold Paul the best one I had, so if still available, don't pass on his. Thanks, Dan

**gmc 2500 4x4** · 10-15-2016, 06:55 AM

Quote:

Originally Posted by w314speed

The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

thanx dan, i know nothing on these. its a good price if ya want oem

**juddss** · 10-15-2016, 10:22 AM

Quote:

Originally Posted by w314speed

Let JUDDSS and Paul finalize there deal. I sold Paul the best one I had, so if still available, don't pass on his. Thanks, Dan

Thanks Dan and Paul. I plan on maybe putting down 625 Hp with my supercharged Ls motor. I just want to see what one will handle the power. What do you think Dan? You seem very knowledgeable on these.

**juddss** · 10-15-2016, 10:46 AM

Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me.
Dan who makes the true trac Detroit?

**w314speed** · 10-16-2016, 10:16 AM

Quote:

Originally Posted by juddss

Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me.
Dan who makes the true trac Detroit?

I don't know. I have tried to run the Cast #s, but find nothing concrete. I can assume that the true-trac is a Dana product for basic posi and the Power-Lok was an option that was specific to our trucks on the Spid Label. Maybe, some of our other board members have some input! LMK about the 3:54 gears. Thanks, Dan

**gmc 2500 4x4** · 10-16-2016, 10:22 AM

Workin now, that is a spicer# on that unit. I give u more info when I get home. Pm your address so I can get a quote

**gmc 2500 4x4** · 10-16-2016, 06:19 PM

check out this link: http://therangerstation.com/tech_lib...ana_axle.shtml

10-13-2016, 07:08 PM	#1
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	WTB Traclock or Powerlock carrier for Dana 60 Im looking for a Posi for the rear of my Dana 60. I know I can buy a new one for $450. Im just looking to see if someone has a good one collecting dust and isn't planning on using it. I have 411 gears. Not sure what stock axle is 30 spline?? Its a 71 GMC C20 suburban

10-13-2016, 08:45 PM	#4
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB Traclock or Powerlock carrier for Dana 60 Never thought of getting one off here...I need one for my...cough...Dodge Dart! Next in line if anyone has another for sale, after OP of course.

10-14-2016, 05:59 AM	#5
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 i have one or the other i bought off here, and not going to use. but i have 354 ratio and was bought for the swap out. not sure on carrier compatibility. i will figure it out today, i have about 200.00 in this

10-14-2016, 07:37 AM	#6
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB Traclock or Powerlock carrier for Dana 60 This unit is 30 spline and is good for 3:54 to 4:11 gears. As the pics show, it has all new internal gears and clutch plates. I collected parts and built it for my 72 Custom Camper with Dana 60 and just recently sold it. Obviously, I have more than the $325 plus shipping that I need for it. LMK Thanks, Dan Attached Images Last edited by w314speed; 10-14-2016 at 09:27 AM.

10-14-2016, 09:02 AM	#7
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	Re: WTB Traclock or Powerlock carrier for Dana 60 GMC 2500 4x4 Let me know W314Speed 31 spline axles? I havnt heard of that spline count yet. Just from reading I have heard that they could be low count splines like 16 up to 30 spline. Ill have to pull my axle to find out for sure.

10-13-2016, 07:27 PM	#2
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: WTB Traclock or Powerlock carrier for Dana 60 I got mine here off the board for 200. So hopefully someone has one for ya. I got the powerlok in my 71 n 72 gmcs and love it __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

10-14-2016, 09:35 AM	#9
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: WTB Traclock or Powerlock carrier for Dana 60 The factory dana 60 in our trucks should have 30 spline axles, at least in 71/72 __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

10-14-2016, 10:17 AM	#10
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 Well what I have ain't turning. And I don't have 200 in this. I paid 75.00 from Dan. Don't know if it seized or what. It would need gone thru. So no guarantees

10-14-2016, 10:43 AM	#11
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	Re: WTB Traclock or Powerlock carrier for Dana 60 Any pics? Do you have 354 gears as well? What else comes with it? Last edited by juddss; 10-14-2016 at 11:43 AM.

10-14-2016, 01:30 PM	#12
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 this is what i have, no gears. 10/19/71, spicer#27161x Attached Images

10-14-2016, 02:17 PM	#13
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	Re: WTB Traclock or Powerlock carrier for Dana 60 Ok so the spiders are seized. What do you want for it.

10-14-2016, 07:03 PM	#14
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 what i paid, 75.00 and shipping

10-14-2016, 07:18 PM	#15
w314speed Senior Member Join Date: Jun 2005 Location: atlanta Posts: 2,314	Re: WTB Traclock or Powerlock carrier for Dana 60 The spiders probably aren't seized. I don't think the True-Trac is buildable, from what I understand. There is a lot of pressure on the side gears from the wave spring plates, so it would be hard to turn unless totally worn out. Once installed and used some to get the lube through the center working parts should be fine. I have two more for anyone that might be interested, after GMC 2500 4X4 sells his! I also have 3:54 ring and pinions. Thanks, Dan

10-15-2016, 10:46 AM	#22
juddss Senior Member Join Date: Jul 2015 Location: Syracuse NY Posts: 206	Re: WTB Traclock or Powerlock carrier for Dana 60 Paul ill take the true trac. Do you ever come towards Syracuse. I see your only a couple hours from me. Dan who makes the true trac Detroit?

10-16-2016, 10:22 AM	#24
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 Workin now, that is a spicer# on that unit. I give u more info when I get home. Pm your address so I can get a quote



Register or Log In To remove these advertisements.

10-16-2016, 06:19 PM	#25
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,897	Re: WTB Traclock or Powerlock carrier for Dana 60 check out this link: http://therangerstation.com/tech_lib...ana_axle.shtml

Register or Log In To remove these advertisements.