MI MI-WTB 292 RH Engine Perch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**old51sedan** · 10-31-2016, 07:24 PM

Looking for a right hand engine perch for a 292 engine for my C-10 Please check your parts and look in all your nooks and crannies, there must be one hiding out there somewhere. Thanks, Donn

burb71 · 10-31-2016, 11:49 PM

Quote:

Originally Posted by old51sedan

Looking for a right hand engine perch for a 292 engine for my C-10 Please check your parts and look in all your nooks and crannies, there must be one hiding out there somewhere. Thanks, Donn

I have a set that I got off of a 1968 C/10 with a 292,
need to dig them out first.

Pm me later, I can try and send pics

**GR8-68** · 11-01-2016, 06:04 AM

Are they different from the 250 mounts ? I have a pair of those if they will work, 20.00 + shipping

**Todd68Chevy** · 11-01-2016, 07:14 AM

Quote:

Originally Posted by GR8-68

Are they different from the 250 mounts ? I have a pair of those if they will work, 20.00 + shipping

Yes. The left side is the same between 250 and 292 but the right side is different because of the fuel pump location.

**GR8-68** · 11-01-2016, 07:32 AM

Thanks, I have the stands that came with the 70 I bought but I am not sure if it was originally a 292 or 250, how would I know or identify the mounts I have then.

**old51sedan** · 11-01-2016, 10:23 AM

If your truck has the original SPID sheet in the glove compartment it should say if it was equipped with a 292, if it doesn't mention an optional motor is more than likely came with the 250 six. I'm also told that the RH perch for the 292 is part # 3822956, but I'm not sure. Maybe someone has a book and can verify that for us. My 69 came with the 250 so the SPID doesn't mention an optional motor. Also if it had came with a 292 it should have a 292 emblem below the C/10 emblem on the side fender.

**michael bustamante** · 11-01-2016, 11:10 AM

is the motor mount frame stand from a 66 with a 283 the same as the one you're needing? if so i have it

**old51sedan** · 11-01-2016, 06:25 PM

Quote:

Originally Posted by michael bustamante

is the motor mount frame stand from a 66 with a 283 the same as the one you're needing? if so i have it

I don't know, kind of doubt it. Does it have a part number on it?

**old51sedan** · 11-01-2016, 06:27 PM

Quote:

Originally Posted by burb71

I have a set that I got off of a 1968 C/10 with a 292,
need to dig them out first.

Pm me later, I can try and send pics

PM sent.

**GR8-68** · 11-01-2016, 07:40 PM

Lol on my spid sheet,

I had never seen one so simple as this one

**old51sedan** · 11-02-2016, 09:49 AM

Your sheet looks a lot like mine. Mine is about the same except the Hydromantic trans and the two-tone paint. Apparently also came with a 250 same as mine.

**michael bustamante** · 11-02-2016, 10:44 AM

it looks like my mount is used on the right side for the 292. if youre interested. i can go 30. shipped to you

**old51sedan** · 11-02-2016, 06:07 PM

Quote:

Originally Posted by michael bustamante

it looks like my mount is used on the right side for the 292. if youre interested. i can go 30. shipped to you

I'm a little Leary of it, does it have a part number on it?

**michael bustamante** · 11-02-2016, 06:27 PM

i can clean it up and check it out for you.

**396ci** · 11-05-2016, 11:32 AM

Classic V6 GMC's had a link showing the difference in the RH mount. The 292 mounts are the set on the right and 250 mounts are on the left. Hope that helps!

http://67-72chevytrucks.com/vboard/s...2+motor+mounts

**1968k20** · 11-05-2016, 05:18 PM

When you guys get the mm for old51sedan, I am interested in L and R motor mounts for a 1967 k20 with a 292. It came to me disassembled, but no mounts. Thank you!

**old51sedan** · 11-05-2016, 05:49 PM

Quote:

Originally Posted by 1968k20

When you guys get the mm for old51sedan, I am interested in L and R motor mounts for a 1967 k20 with a 292. It came to me disassembled, but no mounts. Thank you!

I just purchased a set from Florida, so I will pass on these. Thanks

**1968k20** · 11-05-2016, 07:28 PM

Quote:

Originally Posted by old51sedan

I just purchased a set from Florida, so I will pass on these. Thanks

Thank you!

**1968k20** · 11-05-2016, 07:29 PM

Quote:

Originally Posted by burb71

I have a set that I got off of a 1968 C/10 with a 292,
need to dig them out first.

Pm me later, I can try and send pics

Maybe he got them from you!

10-31-2016, 07:24 PM	#1
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 885	MI-WTB 292 RH Engine Perch Looking for a right hand engine perch for a 292 engine for my C-10 Please check your parts and look in all your nooks and crannies, there must be one hiding out there somewhere. Thanks, Donn

11-01-2016, 06:04 AM	#3
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: MI-WTB 292 RH Engine Perch Are they different from the 250 mounts ? I have a pair of those if they will work, 20.00 + shipping __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

11-01-2016, 07:32 AM	#5
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: MI-WTB 292 RH Engine Perch Thanks, I have the stands that came with the 70 I bought but I am not sure if it was originally a 292 or 250, how would I know or identify the mounts I have then. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

11-01-2016, 10:23 AM	#6
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 885	Re: MI-WTB 292 RH Engine Perch If your truck has the original SPID sheet in the glove compartment it should say if it was equipped with a 292, if it doesn't mention an optional motor is more than likely came with the 250 six. I'm also told that the RH perch for the 292 is part # 3822956, but I'm not sure. Maybe someone has a book and can verify that for us. My 69 came with the 250 so the SPID doesn't mention an optional motor. Also if it had came with a 292 it should have a 292 emblem below the C/10 emblem on the side fender. Last edited by old51sedan; 11-01-2016 at 10:27 AM. Reason: Add more Imformation

11-01-2016, 11:10 AM	#7
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: MI-WTB 292 RH Engine Perch is the motor mount frame stand from a 66 with a 283 the same as the one you're needing? if so i have it __________________ 1967custom

11-01-2016, 07:40 PM	#10
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: MI-WTB 292 RH Engine Perch Lol on my spid sheet, I had never seen one so simple as this one Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

11-02-2016, 09:49 AM	#11
old51sedan Senior Member Join Date: Oct 2015 Location: Williamston, Mi Posts: 885	Re: MI-WTB 292 RH Engine Perch Your sheet looks a lot like mine. Mine is about the same except the Hydromantic trans and the two-tone paint. Apparently also came with a 250 same as mine.

11-02-2016, 10:44 AM	#12
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: MI-WTB 292 RH Engine Perch it looks like my mount is used on the right side for the 292. if youre interested. i can go 30. shipped to you Attached Images __________________ 1967custom

11-02-2016, 06:27 PM	#14
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,862	Re: MI-WTB 292 RH Engine Perch i can clean it up and check it out for you. __________________ 1967custom

11-05-2016, 11:32 AM	#15
396ci Senior Member Join Date: Jun 2005 Location: Modesto, CA Posts: 810	Re: MI-WTB 292 RH Engine Perch Classic V6 GMC's had a link showing the difference in the RH mount. The 292 mounts are the set on the right and 250 mounts are on the left. Hope that helps! http://67-72chevytrucks.com/vboard/s...2+motor+mounts Attached Images __________________ Brian XNGH ECV Chapter 58 1972 Jimmy / Blazer Project 2wd 1974 Chevy Crew Cab Shorty

11-05-2016, 05:18 PM	#16
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,632	Re: MI-WTB 292 RH Engine Perch When you guys get the mm for old51sedan, I am interested in L and R motor mounts for a 1967 k20 with a 292. It came to me disassembled, but no mounts. Thank you! __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.