Bad Hombre- 67 SWB Flat black, loud and low - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MalibuVLX · 11-04-2016, 05:51 AM

This is a father and son project my dad and I are doing to spend time together and have some fun. Purchased back in 2014. We pretty much got a title, frame and a motor that sorta ran. Everything else has been swapped out or upgraded. Small back window 67. I was born in 67 so we picked it up for a song. Was intended to build for not a lot and make a few bucks. Well, you guys know how that goes. A lot more money later we love this thing and it has taken its maiden voyage but still working out braking and lighting issues.

After looking at some of these builds like Daves new 68 Chevy SWB, makes me want to tear this down and start all over. That thing is sick. We too, are working out of a small attached garage at my home w grinders, a welder and small plasma cutter.

Pics below are the day we brought it home from my buddy's farm.

MalibuVLX · 11-04-2016, 05:55 AM

Not going to type a lot, but here are a few pics of the progress over the last several years. We hit it hard some and took time off in between.

Frame prep and C Notch. Started w/ PB mid kit and ended up switching to bags and home made notch.

MalibuVLX · 11-04-2016, 05:57 AM

Bed prep and cutting out the bad

MalibuVLX · 11-04-2016, 05:59 AM

bed raise and custom wood bed w/ no show fasteners. TP Raptor bed liner

MalibuVLX · 11-04-2016, 06:01 AM

interior and air controls

MalibuVLX · 11-04-2016, 06:03 AM

starting to look like something....finally

Wheels and exterior

MalibuVLX · 11-04-2016, 06:10 AM

Truck is now in one piece. Has a 1st gen 355 sbc w a 280 cam, 5 speed out of an IROC, 3.73 gears w Eaton posi, hydroboost brakes, P/S, line lock for parking brake and a few burnouts, custom covered seats from a Dodge something?, PB rear system...Blah blah, all done late nights w/ my pops. Good times.

MalibuVLX · 11-04-2016, 06:12 AM

Maiden Voyage to fill er up with gas and my other ride that took 4 years to complete.
Yes, black is the color of choice in this family.

MalibuVLX · 11-04-2016, 06:59 AM

Few other thoughts after the fact. We went w/ flat black because not only do I hate body work, I also, am not very good at it. All painting was done by us in the driveway or garage and we used TP Tools Hot Rod black. The Raptor bedliner is very nice to work with too and also comes from TP.

Rochlow · 11-06-2016, 08:53 PM

Who did you get the bed strips from?

MalibuVLX · 11-08-2016, 08:48 AM

See attached. Not cheap but we wanted the bed to be a focal point. Very happy w the quality.

http://bedwoodandparts.com/i-1925916...102280359.html

11-04-2016, 05:51 AM	#1
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Bad Hombre- 67 SWB Flat black, loud and low This is a father and son project my dad and I are doing to spend time together and have some fun. Purchased back in 2014. We pretty much got a title, frame and a motor that sorta ran. Everything else has been swapped out or upgraded. Small back window 67. I was born in 67 so we picked it up for a song. Was intended to build for not a lot and make a few bucks. Well, you guys know how that goes. A lot more money later we love this thing and it has taken its maiden voyage but still working out braking and lighting issues. After looking at some of these builds like Daves new 68 Chevy SWB, makes me want to tear this down and start all over. That thing is sick. We too, are working out of a small attached garage at my home w grinders, a welder and small plasma cutter. Pics below are the day we brought it home from my buddy's farm. Attached Images

11-04-2016, 05:55 AM	#2
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low Not going to type a lot, but here are a few pics of the progress over the last several years. We hit it hard some and took time off in between. Frame prep and C Notch. Started w/ PB mid kit and ended up switching to bags and home made notch. Attached Images

11-04-2016, 05:57 AM	#3
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low Bed prep and cutting out the bad Attached Images

11-04-2016, 05:59 AM	#4
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low bed raise and custom wood bed w/ no show fasteners. TP Raptor bed liner Attached Images

11-04-2016, 06:01 AM	#5
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low interior and air controls Attached Images

11-04-2016, 06:03 AM	#6
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low starting to look like something....finally Wheels and exterior Attached Images

11-04-2016, 06:10 AM	#7
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low Truck is now in one piece. Has a 1st gen 355 sbc w a 280 cam, 5 speed out of an IROC, 3.73 gears w Eaton posi, hydroboost brakes, P/S, line lock for parking brake and a few burnouts, custom covered seats from a Dodge something?, PB rear system...Blah blah, all done late nights w/ my pops. Good times. Attached Images

11-04-2016, 06:12 AM	#8
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low Maiden Voyage to fill er up with gas and my other ride that took 4 years to complete. Yes, black is the color of choice in this family. Attached Images

11-04-2016, 06:59 AM	#9
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low Few other thoughts after the fact. We went w/ flat black because not only do I hate body work, I also, am not very good at it. All painting was done by us in the driveway or garage and we used TP Tools Hot Rod black. The Raptor bedliner is very nice to work with too and also comes from TP.

11-06-2016, 08:53 PM	#10
Rochlow Registered User Join Date: Aug 2006 Location: St. Albans, Vt Posts: 2,520	Re: Bad Hombre- 67 SWB Flat black, loud and low Who did you get the bed strips from? __________________ ///Relaxed Atmosphere

11-08-2016, 08:48 AM	#11
MalibuVLX Registered User Join Date: Mar 2010 Location: Mechanicsville, Va Posts: 71	Re: Bad Hombre- 67 SWB Flat black, loud and low See attached. Not cheap but we wanted the bed to be a focal point. Very happy w the quality. http://bedwoodandparts.com/i-1925916...102280359.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.