87 fuel senders

[Harley03joe]

I Have An 87 Duel Tank Short bed And I Have 3 Choices
#1 Drop The Tank
#2 Lift The Bed Up
#3 Cut The Bed Open To Get To The Tank Senders
That Would Be Very Easy The Go To Junk Yard Cut Old Bed panels Screw Then On Top Of The 2 Holes, Put The Bed Liner Back Then I'm Done.

I'm 74 And I'm Not Going To Do All That Hard Work
What Do You Folks Think ?
Harley03joe

Click here: 87 chevy r10 Gas Dual Tank Selector Valve - AOL Video Search Results

[ElGracho]

The sender is right under the cab to bed union. There is no easy opening to just cut in the bed to get access. Look down between your bed and cab and you will see the sender.

Pulling the tank is necessary. I pull the bed to pull to the tank. Its proven to be more work but save a lot of frustration for me.

[Harley03joe]

Originally Posted by ElGracho

The sender is right under the cab to bed union. There is no easy opening to just cut in the bed to get access. Look down between your bed and cab and you will see the sender.

Pulling the tank is necessary. I pull the bed to pull to the tank. Its proven to be more work but save a lot of frustration for me.

Well Its Guys Like You That Sheds Light On Things.
YOUR so right The Sender Is Under The Cab Dame ,, Not An Easy Job, Thank You For The Heads UP Your A Great Person.

Im Going To Change The Gas Dual Tank Selector Valve First I Already Replaced The Switch In The Dash.
I'm Just Moving Along On This Job Little By Little I Guess
Thank You Again, I'm Going To Remove The Post About Cutting The Bed Open
Thanks Again
Harley03joe

[Harley03joe]

Removed By Harley03joe

[Harley03joe]

Removed By Harley03joe

[Harley03joe]

removed by harley03joe

[Harley03joe]

removed by harley03joe

[Harley03joe]

Originally Posted by ElGracho

The sender is right under the cab to bed union. There is no easy opening to just cut in the bed to get access. Look down between your bed and cab and you will see the sender.

Pulling the tank is necessary. I pull the bed to pull to the tank. Its proven to be more work but save a lot of frustration for me.

ElGracho
You Know What I Done, I Took The Easy way Out, Ha Ha
I Took My Truck Over To The Good Year Service Center, And They Are Going To Pull Both Tanks Replace The Senders & Pumps A/C Delco Parts Along With The Selector Valve,

Put In My Fuel Filters And Replace The Oil Sender That's Leaking A Little, And New Electoral Connectors All 3 Of Them I Told Them To Solder Them And Shrink Rap Them, And To Lift My Truck On The Frame NOT THE BODY
Also Change The Oil And Filter Also Do A Diagnostic Check On The Computer All For $1,000.00
Happy Happy Happy Camper
Thanks For Shedding The Light On Things
Harley03joe

[Harley03joe]

Removed By Harley03joe

[pontgta]

Too bad you were not closer, I would have told you to come by.

I removed and replaced my fuel tank pump in less than 30 min total.


Rubber hose in the tamk normally solves alot of issues.

[Harley03joe]

Originally Posted by pontgta

Too bad you were not closer, I would have told you to come by.

I removed and replaced my fuel tank pump in less than 30 min total.


Rubber hose in the tamk normally solves alot of issues.

What I Nice Offer And For That I Thank You, Your A Good Person, We Need More Like You
I Had Some Extra Cash So I Went To The Good Year Repair Shop, I'm 74 And Not Going To Lay Under A Truck And Bang My Arms Up, They Already Look Like Chop Meat Ha Ha Ha Let Someone Else Do It
Thank You Very Much For The Offer To Help Me
Harley03joe