todays the day - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ocbaud · 10-11-2003, 10:16 AM

jon will be over around 10 or so this morning. then we will start upbolting all the stuff, then my friend with the cherry picker will come over around 1ish to help up pull the thing.

that 305 is going bye bye

**N2TRUX** · 10-11-2003, 10:17 AM

Good luck with it. Have you called the local scrap yard to see if they will take your old boat anchor...:p

ocbaud · 10-11-2003, 10:25 AM

Quote:

Originally posted by N2TRUX
Good luck with it. Have you called the local scrap yard to see if they will take your old boat anchor...:p

i thought YOU were gonna buy it:p

TIMSPEED · 10-11-2003, 11:35 AM

Good luck on pulling that motor

Just remember to put a jack under the tranny to support it. (Or maybe a block of wood will do because your tranny is so low.) It took me and my friend (two guys who'd NEVER pulled a motor before) all of like 6 hours to pull out my old motor and put in my new motor...the hardest part, was getting the damn motor to sit in the bay properly, so we could get the motor mount bolts in.

*1FaastC10* · 10-11-2003, 11:38 AM

im getting ready to pull the motor out of my 86 today too. im just gonna regasket it, attach a new trans, and put it back in though. good luck!

Russell · 10-11-2003, 12:38 PM

I'm pulling an old 350 today too

Good luck everyone!

*1FaastC10* · 10-11-2003, 07:48 PM

mine is out, and disassembled to a shortblock. all 8 cylinders, pistons and combustion chambers look good. however, it looks like the cam and lifters and timing chain are shot.

10-11-2003, 10:16 AM	#1
ocbaud Garage Queen Material Join Date: Oct 2002 Location: USA Posts: 4,129	todays the day jon will be over around 10 or so this morning. then we will start upbolting all the stuff, then my friend with the cherry picker will come over around 1ish to help up pull the thing. that 305 is going bye bye

10-11-2003, 10:17 AM	#2
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Good luck with it. Have you called the local scrap yard to see if they will take your old boat anchor...:p __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

10-11-2003, 11:35 AM	#4
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Good luck on pulling that motor Just remember to put a jack under the tranny to support it. (Or maybe a block of wood will do because your tranny is so low.) It took me and my friend (two guys who'd NEVER pulled a motor before) all of like 6 hours to pull out my old motor and put in my new motor...the hardest part, was getting the damn motor to sit in the bay properly, so we could get the motor mount bolts in. __________________ I have a few cars... See Them Here

10-11-2003, 12:38 PM	#6
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	I'm pulling an old 350 today too Good luck everyone! __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

10-11-2003, 11:38 AM	#5
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	im getting ready to pull the motor out of my 86 today too. im just gonna regasket it, attach a new trans, and put it back in though. good luck!

10-11-2003, 07:48 PM	#7
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,400	mine is out, and disassembled to a shortblock. all 8 cylinders, pistons and combustion chambers look good. however, it looks like the cam and lifters and timing chain are shot.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.