WI One group of parts for sale

[Zimme228]

1966 step-side fender with molding for a spare tire and backup light $85
New, unpolished stainless bed strips $75
New main bed cross-braces (3) with tabs still not welded on $75

Driver's bedside $45
Original door windows $25
Front painted bumper $10
Rear tow bumper $15

Driver's side lower door hinge $10
8" open air cleaner $10
Fender welting -- Free
Rubber pads for under the cross-braces $5
Wing window handles (new, reproduction) -- Free

Armrest Bolts with Cage nuts (sell individually or as bulk.. just ask)
1963 - 1969 230 inline six.. $(fair price.. ?)

LH, RH inner door panels $15 (for the pair) SOLD
Pair of headlight bezels $10 - SOLD
Spare tire mount $35 - SOLD
Thermostat housing $5 - SOLD
1 Fender Emblem - SOLD

[pimpston65]

Originally Posted by Zimme228

1966 step-side fender with moulding for a spare tire and moulding for a backup light, spare tire mount, driver's side bed side, original door windows, driver's side original door lower hinge, 8 inch open air cleaner, in line six valve cover, carb and distributor, front painted bumper, rear tow bumper, new unpolised stainless steel bed strips, three new bed cross braces with tabs, but tabs haven't been welded on yet so they can be used for a 1960 - 1963 also, new rubber pads which go between the braces and the frame LH, RH inner door panels.

prices for items are needed, and pictures would be helpful also.

[Zimme228]

Here are two photos of the fender.

[Zimme228]

Here are two photos of the spare tire mount with both angle iron brackets and the inner box side.

[Zimme228]

The front side of these fender emblems is fine, but the body shop was successful to break off three of the four mounting pins on the back side. I don't know if it would be possible to epoxy new pins on or not. The window regulator is an original, and it is missing the nylon disks which go into the window support track. I couldn't find those little rollers, so I purchased a new regulator. In bubble wrap is the door hinge which needs bushings. The plastic bag is the new rubber mounting pads for where the bed rests on the frame.

[Zimme228]

Pictured are two original door windows. They have light scratches in the middle where the door felts had worn away. Maybe they can be polished or not. I am not sure. Also, I have an extra valve cover, distributor, carb for parts.

[Zimme228]

Painted front bumper and rear tow bumper. Both are slightly bent but as the pictures show, not to much.

[Zimme228]

Additional photos of the fender. My apologies, I didn't realize that the dust would show up so much in the photo. This fender has been undercoated on the inside. All it would need is a light sanding to remove the orange paint and then sprayed according to the project you are working on. It's the original fender which came off of my truck, which was from Mississippi, so it wasn't to rusty or dinged up. It was only a little thin around the rear bottom corner where road dirt catches and sits.

[Zimme228]

Here is the other sides of the bumpers, and the box side. The box side needs a new angle strip and some work on the bottom portion of it.

[60-66]

I might be interested in the tailgate

[Zimme228]

Sorry, I let the tailgate go this summer. I included that photo to show the other sides of the bumpers. My apologies for any misunderstandings.

[Lokin4AReason]

do you have any stock factory 6 lug wheel(s) ...?

[60-66]

Originally Posted by Zimme228

Sorry, I let the tailgate go this summer. I included that photo to show the other sides of the bumpers. My apologies for any misunderstandings.

This is Jon in Union Grove , aren't you the one that came down to get some parts from me ?

[Zimme228]

Yes, it's Me. How are you? I still need more parts.. some smaller things, but also need to sell these few items. Good to hear from you! Sure will be nice when my truck is drivable so I can come down and show you it. Some guys on another thread are guiding me through the fixing some issues like tuning the engine.

Have a good evening.

[Zimme228]

No stock rims.. When I had bought my truck, it came with the cheep wagon spoke designed steel rims, and one was so rusty that I could put my finger inside of the mounted tire. Those rims were the first things I got ride of. I think Jon who just wrote me above has rims though.

[BR3W CITY]

Still got the bedside? I'm local, shoot me a price.

[Zimme228]

Good morning, yes, I still have the bedside. $75

[1968k20]

Is that carb off of a 292 by chance?

[paulspickupparts]

I will take the spare tire carrier . Can you give me a shipping quote/total to 68434. Thanks

[paulspickupparts]

If the headlight bezels are good and streaight I will take them also . I am interested in the thermostat housing if you can give a price. Thanks

[bonestock72]

second on the spare tire carrier, please

[Zimme228]

Originally Posted by 1968k20

Is that carb off of a 292 by chance?

The carb came with my truck when I bought it, so I am assuming that it is off the 230 which originally was in my truck. In the picture the little center bar which the air cleaner fastens on to is broken off, so I am unsure if the rest of it is useful for parts or if that top piece can be repaired.

[Zimme228]

Originally Posted by paulspickupparts

I will take the spare tire carrier . Can you give me a shipping quote/total to 68434. Thanks

Yes, tomorrow, Friday I will get a shipping quote to your zip before COB. Thank you.

[Zimme228]

Originally Posted by bonestock72

second on the spare tire carrier, please

Thank you for your request about the tire carrier. If the previous person doesn't end up buying it, I will let you know. Have a good evening.

[Zimme228]

Here is a picture of the headlight bezels.