TX Wtb Greaseable np205 bolt 71/72

[Krex]

Like the title says looking for

Greaseable np205 bolt 71/72 it holds the shift stick to the shift rails.

Thank you

[Krex]

Originally Posted by 72ironmike

Try the link below if it works or pm Classic Bowties

http://67-72chevytrucks.com/vboard/s...d.php?t=251225

Thanks I have tried classic also that is old post have read that before

To add to what I am looking for is

GM 14009313

Thank you

[Krex]

bump still looking

[franken]

For the googly challenged: https://www.google.com/#q=GM+14009313+bolt
I always find it interesting that people are unable/unwilling to search the internet, or prefer to ask and wait rather than searching and getting answers is a second...

[jocko]

One also has to be careful what one trusteth when he googleth. Perhaps Krex would prefer to go with something a bit more reputable, like a member. However, if you happen to successfully purchase one of these rather hard to find bolts for $3.19 (the first link in your search), and it arrives on your doorstep, I think we'd all love to hear about it. The second and third links show it as discontinued like just about every other place I've checked. I purchased one on here recently. Not cheap and not outrageous either, but I needed it, and I knew there was a human on the other end of it.

Krex, fwiw, the ones I've seen came with a hole that you would have to tap for the zerk - but it came with the zerk. I think it depends on date of manufacture for what you get with the part #. Good luck, hard to find gadget. My shifter rattles like crazy, haven't had a chance to install the bolt yet.

[franken]

I'll leave off the fake old English, but we pay /w credit card. No part; no pay.
I'd imagine that of 260 hits, one would have the part. I'm pretty sure there's another number due to the original being replaced as well.

[franken]

I have a few, but if I needed one and couldn't buy it, I'd probably get a bolt w/ the right length and thread, then locate a bronze bushing the right size, cut it in half and so on.

[a1vintage69]

NP205 Greasable Pivot Bolt

This is a custom made greasable pivot bolt for 205 twin stick applications. The bolt has two full circumference grooves with two grease passages per groove. It will work with GM or Ford kits - see the twin stick description as this bolt is included in some kits. If you are using this on any shifter other than mine



please verify that your shifter pivot hole is 3/4" in diameter. The picture shows the bolt on the end of grease gun with grease coming out of the dual passage grooves.

Price: $20.00 here is his website http://jkwoffroad.com/offroadproducts.php

[Krex]

Originally Posted by franken

For the googly challenged: https://www.google.com/#q=GM+14009313+bolt
I always find it interesting that people are unable/unwilling to search the internet, or prefer to ask and wait rather than searching and getting answers is a second...

Thanks for the unhelpful comment and for letting me know there was a website called google. Happy holidays! -Rex
Posted via Mobile Device

[Krex]

Originally Posted by jocko

One also has to be careful what one trusteth when he googleth. Perhaps Krex would prefer to go with something a bit more reputable, like a member. However, if you happen to successfully purchase one of these rather hard to find bolts for $3.19 (the first link in your search), and it arrives on your doorstep, I think we'd all love to hear about it. The second and third links show it as discontinued like just about every other place I've checked. I purchased one on here recently. Not cheap and not outrageous either, but I needed it, and I knew there was a human on the other end of it.

Krex, fwiw, the ones I've seen came with a hole that you would have to tap for the zerk - but it came with the zerk. I think it depends on date of manufacture for what you get with the part #. Good luck, hard to find gadget. My shifter rattles like crazy, haven't had a chance to install the bolt yet.

I have searched google... The places that say they have the part number in stock do not

[Krex]

Originally Posted by franken

I have a few, but if I needed one and couldn't buy it, I'd probably get a bolt w/ the right length and thread, then locate a bronze bushing the right size, cut it in half and so on.

Let me know if you have to give one up!

my set up is 71 k20 with np205 with TH350 adapter.

Thank you

[Krex]

Originally Posted by a1vintage69

NP205 Greasable Pivot Bolt

This is a custom made greasable pivot bolt for 205 twin stick applications. The bolt has two full circumference grooves with two grease passages per groove. It will work with GM or Ford kits - see the twin stick description as this bolt is included in some kits. If you are using this on any shifter other than mine



please verify that your shifter pivot hole is 3/4" in diameter. The picture shows the bolt on the end of grease gun with grease coming out of the dual passage grooves.

Price: $20.00 here is his website http://jkwoffroad.com/offroadproducts.php

Do you know it this works for a 71 stick with the TH350 adapter?

Thank you

[bluek5]

Originally Posted by Krex

Do you know it this works for a 71 stick with the TH350 adapter?

Thank you

That bolt is for a twin stick conversion. Going to be too long for your needs. Do you have a bolt now and just looking for a greasable bolt?

[a1vintage69]

Originally Posted by Krex

Do you know it this works for a 71 stick with the TH350 adapter?

Thank you

blue k5 has it right. not what you need.. Did you try Dan's obsolete , he is always spendy but has a big warehouse. good luck

[jocko]

Now I'm wondering if I have the right bolt Sutton in the box in my shelf!

[jaros44sr]

Originally Posted by franken

For the googly challenged: https://www.google.com/#q=GM+14009313+bolt
I always find it interesting that people are unable/unwilling to search the internet, or prefer to ask and wait rather than searching and getting answers is a second...

That's amazing, 10 pages, but it doesn't support the board members trying to sell parts

list me with the ones unable

actually, I need one of those twin stick bolts, thanks for posting up

[Krex]

Originally Posted by bluek5

That bolt is for a twin stick conversion. Going to be too long for your needs. Do you have a bolt now and just looking for a greasable bolt?

I do not have a bolt I need one.

[bluek5]

Originally Posted by Krex

I do not have a bolt I need one.

I was at a wrecking yard today, almost grabbed one. It did not have a grease zerk. I don't know why you couldn't drill a grease passage in it bolt without one and thread it for a zerk.

[Krex]

Originally Posted by bluek5

I was at a wrecking yard today, almost grabbed one. It did not have a grease zerk. I don't know why you couldn't drill a grease passage in it bolt without one and thread it for a zerk.

Are you selling one or both? If you are let me know a price to 75023

You can pm or post thank you.

[jaros44sr]

Originally Posted by Krex

Are you selling one or both? If you are let me know a price to 75023

You can pm or post thank you.

If after you find a bolt, you need someone to drill and tap it, LMK as I can do it for you, if you don't have a lathe and drill press

[jocko]

Have to ask - what is the desire for two stick conversions? Interesting website with some real nice quality parts in the link above, but why would one want independent control like that? Is it a rock crawler thing? Just curious.

[57taskforce]

Originally Posted by jocko

Have to ask - what is the desire for two stick conversions? Interesting website with some real nice quality parts in the link above, but why would one want independent control like that? Is it a rock crawler thing? Just curious.

Yea its an off road thing, it's actually pretty useful when you get into certain sticky situations.. One useful thing is You can partially lock the emergency brake up and use the front wheel drive (rear wheels in neutral) to then pivot the front end to get around obstacles or what ever the case may be.

[jaros44sr]

OK, since I just ordered my twin stic pivot bolt my oem bolt is available for sale. looks new, never used. paypal 20.00 plus shipping

IT DOESN'T HAVE A ZERK, but I can fix it

[jaros44sr]

[url=https://flic.kr/p/P9qons]20161221_102533[

[CUSTOM/10]

I'd be interested in buying the bolt, if you'd drill & tap it for the zerk fitting !

Of course after Krex !!!

Gary