NC 67 to early 68 bench seat - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GR8-68** · 12-02-2016, 07:16 AM

I have a flip forward bench from an early 68 it is in real good condition complete with tracks. It will need recovered but all springs and foam are intact. 160.00 not sure if I can ship this due to size but if you have an idea I am open to it. I will be traveling to Atlanta in a few weeks if anyone that way is interested I would be willing to meet you somewhere between Winston and Atlanta.

54Caddy · 12-02-2016, 08:05 AM

Shipping would probably kill. But I think easiest way to ship is to remove back and stack it. Then box it up. If your willing to check. I'm interested pending shipping quote to 93292

**GR8-68** · 12-02-2016, 08:07 AM

Quote:

Originally Posted by 54Caddy

Shipping would probably kill. But I think easiest way to ship is to remove back and stack it. Then box it up. If your willing to check. I'm interested pending shipping quote to 93292

That was my thoughts also was to disassemble. I can check for you, do you have a fastenal in your area ? I have heard many good reports on their shipping rates

**GR8-68** · 12-02-2016, 08:47 AM

I ran to the shop this morning and disassembled the seat, I will check shipping on individual pieces through fed ex for you.

Undone · 12-02-2016, 09:29 AM

Inline

**GR8-68** · 12-02-2016, 11:17 AM

Quote:

Originally Posted by 54Caddy

Shipping would probably kill. But I think easiest way to ship is to remove back and stack it. Then box it up. If your willing to check. I'm interested pending shipping quote to 93292

Even separating the pieces just a quote on the bottom was 160.00 probably because of the dimensions so shipping is probably not an option on this item, sorry

**GR8-68** · 12-02-2016, 11:20 AM

Quote:

Originally Posted by Undone

Inline

I will be driving by you on the 26th of December

54Caddy · 12-02-2016, 06:30 PM

There's a fastenal down the street from me check there

TwoFiftyShifter · 12-02-2016, 06:44 PM

Put me in line for a meetup in Georgia

Undone · 12-02-2016, 08:59 PM

Quote:

Originally Posted by GR8-68

I will be driving by you on the 26th of December

I'll take it if you can verify all seat springs are good.

**GR8-68** · 12-02-2016, 09:11 PM

Quote:

Originally Posted by 54Caddy

There's a fastenal down the street from me check there

over 300.00

size and weight and going coast to coast ruins shipping

**GR8-68** · 12-02-2016, 09:12 PM

Quote:

Originally Posted by Undone

I'll take it if you can verify all seat springs are good.

I am about positive they are all good, but let me do a double check tomorrow, I do not want to mislead at all. I can also take better pics of springs tomorrow if you would like me too.

Undone · 12-02-2016, 09:35 PM

Quote:

Originally Posted by GR8-68

I am about positive they are all good, but let me do a double check tomorrow, I do not want to mislead at all. I can also take better pics of springs tomorrow if you would like me too.

Yes take pictures.

**GR8-68** · 12-02-2016, 09:47 PM

Quote:

Originally Posted by Undone

Yes take pictures.

I will get some for you tomorrow when I go to my shop. Thank you

54Caddy · 12-03-2016, 12:30 AM

I thought there shipping was real cheap if it fits on a pallet. Dang be perfect for truck as is too.

**GR8-68** · 12-03-2016, 05:34 AM

Quote:

Originally Posted by 54Caddy

I thought there shipping was real cheap if it fits on a pallet. Dang be perfect for truck as is too.

It was considerably cheaper than fed ex freight which was closer to 500

**GR8-68** · 12-03-2016, 08:33 AM

All the springs look good even the adjuster wire and springs are intact

Undone · 12-03-2016, 09:52 AM

Looks good, drivers side end springs are of main concern. PM me with details about meeting up on the 26th.

**GR8-68** · 12-28-2016, 09:38 PM

Still available,

54Caddy · 12-29-2016, 02:46 AM

Take a trip to CA hahaha. Wonder if frieght to business address be any better.

**GR8-68** · 12-29-2016, 03:41 AM

Quote:

Originally Posted by 54Caddy

Take a trip to CA hahaha. Wonder if frieght to business address be any better.

It might be, get me an address and I will get a quote for you

54Caddy · 12-29-2016, 02:14 PM

Same zip code 93292

**GR8-68** · 12-29-2016, 09:03 PM

Quote:

Originally Posted by 54Caddy

Same zip code 93292

Okay, I will just call the local fastenal tomorrow

**GR8-68** · 12-30-2016, 08:48 AM

Just waiting on a quote to come back from them.

Cbo · 12-30-2016, 11:26 AM

In line if you'd ship to jersey. Can you get a quote to 08330?

Honestly, I'd rock that thing AS IS in my truck!

12-02-2016, 07:16 AM	#1
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	67 to early 68 bench seat I have a flip forward bench from an early 68 it is in real good condition complete with tracks. It will need recovered but all springs and foam are intact. 160.00 not sure if I can ship this due to size but if you have an idea I am open to it. I will be traveling to Atlanta in a few weeks if anyone that way is interested I would be willing to meet you somewhere between Winston and Atlanta. Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

12-02-2016, 08:05 AM	#2
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: 67 to early 68 bench seat Shipping would probably kill. But I think easiest way to ship is to remove back and stack it. Then box it up. If your willing to check. I'm interested pending shipping quote to 93292 __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-02-2016, 08:47 AM	#4
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 67 to early 68 bench seat I ran to the shop this morning and disassembled the seat, I will check shipping on individual pieces through fed ex for you. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

12-02-2016, 09:29 AM	#5
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: 67 to early 68 bench seat Inline

12-02-2016, 06:30 PM	#8
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: 67 to early 68 bench seat There's a fastenal down the street from me check there __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-02-2016, 06:44 PM	#9
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: 67 to early 68 bench seat Put me in line for a meetup in Georgia __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

12-03-2016, 12:30 AM	#15
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: 67 to early 68 bench seat I thought there shipping was real cheap if it fits on a pallet. Dang be perfect for truck as is too. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-03-2016, 08:33 AM	#17
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 67 to early 68 bench seat All the springs look good even the adjuster wire and springs are intact Attached Images __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

12-03-2016, 09:52 AM	#18
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: 67 to early 68 bench seat Looks good, drivers side end springs are of main concern. PM me with details about meeting up on the 26th.

12-28-2016, 09:38 PM	#19
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 67 to early 68 bench seat Still available, __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

12-29-2016, 02:46 AM	#20
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: 67 to early 68 bench seat Take a trip to CA hahaha. Wonder if frieght to business address be any better. __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-29-2016, 02:14 PM	#22
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,296	Re: 67 to early 68 bench seat Same zip code 93292 __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

12-30-2016, 08:48 AM	#24
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: 67 to early 68 bench seat Just waiting on a quote to come back from them. __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

12-30-2016, 11:26 AM	#25
Cbo Registered User Join Date: Sep 2016 Location: Mays landing, New Jersey Posts: 119	Re: 67 to early 68 bench seat In line if you'd ship to jersey. Can you get a quote to 08330? Honestly, I'd rock that thing AS IS in my truck!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.