NC SWB 1 Piece Driveshaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bozracer · 12-02-2016, 08:17 PM

Shortbed 1 piece driveshaft measures 56 1/2 inches from the end of each ujoint
$60 plus shipping

Toms67 · 12-02-2016, 09:13 PM

Is it a 32 spline on the yoke?

Toms67 · 12-02-2016, 10:19 PM

Was this out of a four-wheel-drive?

bozracer · 12-02-2016, 11:08 PM

Quote:

Originally Posted by Toms67

Was this out of a four-wheel-drive?

Came out of a 70 shortbed stepside with a straight 6 and 3speed 32 spline
Thanks

*randy500* · 12-03-2016, 12:07 AM

That's 27 spline yoke, same as TH350. 32 spline is larger and for TH400.

Toms67 · 12-03-2016, 06:32 AM

I thought it looked smaller in the picture. I measured my driveshaft Length. Mine is 58 1/2 inches center cap To center cap. The PO must've wedged in there to get it to fit. So I need one about an inch and a half shorter. That's center cap to Center cap. Thanks anyway.

**72ironmike** · 12-03-2016, 09:35 AM

I'll take it pending shipping to 66061 less than $40 ?

bozracer · 12-03-2016, 02:28 PM

Quote:

Originally Posted by 72ironmike

I'll take it pending shipping to 66061 less than $40 ?

Ok so I counted the splines again and it is 27...Sorry. Mike if still interested it looks like $28 to 66061

Thanks Oz

**72ironmike** · 12-03-2016, 05:47 PM

Quote:

Originally Posted by bozracer

Ok so I counted the splines again and it is 27...Sorry. Mike if still interested it looks like $28 to 66061

Thanks Oz

Paypal or M.O. ? $88 total ? Thanks.

bozracer · 12-03-2016, 10:18 PM

Quote:

Originally Posted by 72ironmike

Paypal or M.O. ? $88 total ? Thanks.

Paypal, Sent PM.

**72ironmike** · 12-04-2016, 09:07 AM

Quote:

Originally Posted by bozracer

Paypal, Sent PM.

Oz Payment sent, Thanks. Mike.

bozracer · 12-04-2016, 02:08 PM

Quote:

Originally Posted by 72ironmike

Oz Payment sent, Thanks. Mike.

Sold to 72ironmike, Thanks Mike I will ship Monday Morning.

**72ironmike** · 12-13-2016, 09:37 PM

Bobby, Driveshaft received. Thanks. Mike.

12-02-2016, 08:17 PM	#1
bozracer wnc tvman Join Date: Sep 2004 Location: Etowah,North Carolina Posts: 228	SWB 1 Piece Driveshaft Shortbed 1 piece driveshaft measures 56 1/2 inches from the end of each ujoint $60 plus shipping __________________ Oz WNC 67 Short Fleet 350 4speed 70 Short Fleet 327 4speed

12-02-2016, 09:13 PM	#2
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: SWB 1 Piece Driveshaft Is it a 32 spline on the yoke?

12-02-2016, 10:19 PM	#3
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: SWB 1 Piece Driveshaft Was this out of a four-wheel-drive?

12-03-2016, 12:07 AM	#5
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: SWB 1 Piece Driveshaft That's 27 spline yoke, same as TH350. 32 spline is larger and for TH400.

12-03-2016, 06:32 AM	#6
Toms67 Registered User Join Date: May 2016 Location: Sackets harbor ny Posts: 282	Re: SWB 1 Piece Driveshaft I thought it looked smaller in the picture. I measured my driveshaft Length. Mine is 58 1/2 inches center cap To center cap. The PO must've wedged in there to get it to fit. So I need one about an inch and a half shorter. That's center cap to Center cap. Thanks anyway.

12-03-2016, 09:35 AM	#7
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: SWB 1 Piece Driveshaft I'll take it pending shipping to 66061 less than $40 ?

12-13-2016, 09:37 PM	#13
72ironmike Senior Member Join Date: Jan 2004 Location: Olathe KS (Greater Kansas City MO Area) Posts: 2,057	Re: SWB 1 Piece Driveshaft Bobby, Driveshaft received. Thanks. Mike.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.