Looking for 68 front fenders in Texas - The 1947 - Present Chevrolet & GMC Truck Message Board Network

matt67350 · 10-11-2003, 10:30 PM

Needed, 68 fenders in North Texas.

**old Rusty C10** · 10-12-2003, 11:41 AM

i got a left one no markr lens and no rot some surface rust can be sanded off $75 plus shipping but its no where near texas its in mid NJ pic available

SCOTI · 10-12-2003, 02:55 PM

Did you decide against using the repops?

*smooth72* · 10-12-2003, 04:58 PM

just picked up 68 lwb truck in fort worth this morning out by the race track for 275.00 with running 350 . so i have real good drivers fender 69.00 i will be parting it out bed has good drivers side and floor and it has perfect doors no rust bad grill great hood call if interested 903-456-3510

matt67350 · 10-12-2003, 07:18 PM

SCOTI, need the side markers for this project

matt67350 · 10-12-2003, 07:19 PM

smooth72, does it have a good front clip or just a fender?

SCOTI · 10-12-2003, 10:32 PM

Matt, your welcome to my drivers front fender when I swap them out if you can't find any before that time (you already know the pass side isn't worth anything).

Hutch · 10-12-2003, 10:44 PM

matt67350
Try Little Johns Salvage on Elliott Reeder Road in Haltom city.
He has some trucks and may have what you are looking for.
Be sure and check the area across the street for the new arrivals.

Have fun

matt67350 · 10-12-2003, 11:46 PM

SCOTI,
thanks,
I'll find some, it just takes time.

68 Suburban · 10-13-2003, 01:52 AM

Oh my!!!! I can only guess how much these are going to go for!!!!

http://cgi.ebay.com/ebaymotors/ws/eB...category=33644

Mike C · 10-13-2003, 01:36 PM

Don't forget that you can use 68-72 GMC fenders which will give you more to choose from.

dinnut · 10-13-2003, 05:38 PM

those nos fenders are worthless with that ding

i should take them off his hands immediately

10-11-2003, 10:30 PM	#1
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	Looking for 68 front fenders in Texas Needed, 68 fenders in North Texas.

10-12-2003, 11:41 AM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,287	i got a left one no markr lens and no rot some surface rust can be sanded off $75 plus shipping but its no where near texas its in mid NJ pic available __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-12-2003, 02:55 PM	#3
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Did you decide against using the repops? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-12-2003, 04:58 PM	#4
smooth72 Account Suspended Join Date: Aug 2003 Location: south Posts: 34	fenders just picked up 68 lwb truck in fort worth this morning out by the race track for 275.00 with running 350 . so i have real good drivers fender 69.00 i will be parting it out bed has good drivers side and floor and it has perfect doors no rust bad grill great hood call if interested 903-456-3510

10-12-2003, 07:18 PM	#5
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	SCOTI, need the side markers for this project __________________ 69 swb stepside, rebuild and upgrade in progress

10-12-2003, 07:19 PM	#6
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	smooth72, does it have a good front clip or just a fender? __________________ 69 swb stepside, rebuild and upgrade in progress

10-12-2003, 10:32 PM	#7
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,963	Matt, your welcome to my drivers front fender when I swap them out if you can't find any before that time (you already know the pass side isn't worth anything). __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-12-2003, 10:44 PM	#8
Hutch Registered User Join Date: Oct 2001 Location: Grapevine, Tx. Posts: 2,142	matt67350 Try Little Johns Salvage on Elliott Reeder Road in Haltom city. He has some trucks and may have what you are looking for. Be sure and check the area across the street for the new arrivals. Have fun __________________ John Hutchison Grapevine,Texas 68 1/2 t swb 68 Mustang 69 Jaguar 71 1/2 t swb 88 Supra CompTs6m 93 Escort GT 2005 Corolla XRS

10-12-2003, 11:46 PM	#9
matt67350 Registered User Join Date: May 2001 Location: Benbrook, TX Posts: 1,060	SCOTI, thanks, I'll find some, it just takes time. __________________ 69 swb stepside, rebuild and upgrade in progress

10-13-2003, 01:52 AM	#10
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Oh my!!!! I can only guess how much these are going to go for!!!! http://cgi.ebay.com/ebaymotors/ws/eB...category=33644 __________________ Just sitting here contemplating contemplation.

10-13-2003, 01:36 PM	#11
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,717	Don't forget that you can use 68-72 GMC fenders which will give you more to choose from. __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

10-13-2003, 05:38 PM	#12
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	those nos fenders are worthless with that ding i should take them off his hands immediately __________________ 70 longbed 496/th400/Ford 9"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.