Wanted - Two Piece LB Driveshaft - KS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Hugger · 10-13-2003, 10:41 AM

I'm in Wichita KS, and am needing a 2 piece LB drive shaft.
Thanks

Yellow Cheyenne · 10-13-2003, 10:48 AM

I can't help you, but there are generally 2 types for a 1/2 ton. You need to identify it as a 1/2 ton and does it have coil or leaf rear springs?

Randy

*Phillip Johnson* · 10-13-2003, 11:23 AM

I have a 3/4 from a coil spring set up for 350 turbo in Chico Calif. Can pick it up the week of nov 6th but the shipping will be killer.
Try Randy (teeitup).. He just bought several trucks in your area.

Hugger · 10-13-2003, 11:23 AM

Thanks...It has coil springs.
Erik

kilomanjaro · 10-13-2003, 11:35 AM

I have an extra d-shaft in manhattan, ks, it has new u-joints and a new carrier bearing. email me if you are interested.
john

**Yukon Jack** · 10-13-2003, 04:18 PM

A buddy of mine in Wichita has that setup off a 72 1/2 ton, coil truck. It is missing the yoke at the auto tranny end. He's asking $50.

**Ironhorse** · 10-13-2003, 04:27 PM

I've got two LB 2 piece shafts to choose from. One from a 68 GMC had 305 V-6 with granny 4-spd, other from a 71 with 350/350 combo. Both are complete but need new joints and carrier bearing to be trustworthy but your choice, $25. May even deliver as I work in Wichita and am 30 miles south. PM if interested.

gregsplace · 10-13-2003, 04:29 PM

I live west of wichita between Goddard and Andale. I have "alot" of 67-72 drive shafts. Most will need new u-joints and carrier bearing but will sell cheap. Email me, Greg

nlyne · 10-13-2003, 04:35 PM

Hi. I am in Abilene (just about 90 north of you) and have one that I would sell for $40 if you want to come and get it. Thanks. Doug 785-263-1507 8-5, or email me.

Hugger · 10-13-2003, 05:30 PM

I found what I needed.

Thanks, for all the replies.

Erik

10-13-2003, 10:41 AM	#1
Hugger Registered User Join Date: Mar 2003 Location: Wichita, KS Posts: 137	Wanted - Two Piece LB Driveshaft - KS I'm in Wichita KS, and am needing a 2 piece LB drive shaft. Thanks __________________ 72 LWB - Hugger Orange 350/350 3.73 Next; 335hp GM Crate

10-13-2003, 10:48 AM	#2
Yellow Cheyenne Registered User Join Date: Jun 2001 Location: Eastern Kansas Posts: 488	I can't help you, but there are generally 2 types for a 1/2 ton. You need to identify it as a 1/2 ton and does it have coil or leaf rear springs? Randy __________________ '72 Cheyenne. AC, PS, PB, Rear slider window, tilt. Light yellow (grapefruit yellow according to new sales literature from '72) '56 Chevy short step V-8 (My dad bought it new!!) '70 Olds 442 convertible '70 Olds Rallye 350

10-13-2003, 11:23 AM	#4
Hugger Registered User Join Date: Mar 2003 Location: Wichita, KS Posts: 137	Thanks...It has coil springs. Erik __________________ 72 LWB - Hugger Orange 350/350 3.73 Next; 335hp GM Crate

10-13-2003, 11:35 AM	#5
kilomanjaro Senior Member Join Date: Mar 2001 Location: From Kansas now in Palmer, Alaska Posts: 807	driveshaft I have an extra d-shaft in manhattan, ks, it has new u-joints and a new carrier bearing. email me if you are interested. john __________________ 63 Buick Wildcat 425 72 Chevy Blazer CST 72 Chevy C10 Cheyenne 00 Ford F-350 Super Duty 7.3L 09 Dodge Challenger SRT-8 10 Ford Expedition Limited

10-13-2003, 04:18 PM	#6
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,689	A buddy of mine in Wichita has that setup off a 72 1/2 ton, coil truck. It is missing the yoke at the auto tranny end. He's asking $50. __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

10-13-2003, 11:23 AM	#3
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	I have a 3/4 from a coil spring set up for 350 turbo in Chico Calif. Can pick it up the week of nov 6th but the shipping will be killer. Try Randy (teeitup).. He just bought several trucks in your area.

10-13-2003, 04:27 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	I've got two LB 2 piece shafts to choose from. One from a 68 GMC had 305 V-6 with granny 4-spd, other from a 71 with 350/350 combo. Both are complete but need new joints and carrier bearing to be trustworthy but your choice, $25. May even deliver as I work in Wichita and am 30 miles south. PM if interested. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-13-2003, 04:29 PM	#8
gregsplace Senior Member Join Date: Dec 2000 Location: Colwich,Kansas Posts: 713	I live west of wichita between Goddard and Andale. I have "alot" of 67-72 drive shafts. Most will need new u-joints and carrier bearing but will sell cheap. Email me, Greg __________________ 67 3/4 4x4 402,a/t,flat bed 98 GMC Sierra swb daily driver 87 burb parting out. 68 1/2 chevy, 350/350, 71 gmc frame, kid's beater 69 1ton 396-4sp, dump 69 swb stepside 396/400th current frameup 67 swb 454/400th rebuilding now, oldest boy just rolled it 99,HD, Road King Classic Colwich Ks

10-13-2003, 04:35 PM	#9
nlyne Registered User Join Date: Feb 2001 Location: Abilene, Ks Posts: 33	Hi. I am in Abilene (just about 90 north of you) and have one that I would sell for $40 if you want to come and get it. Thanks. Doug 785-263-1507 8-5, or email me. __________________ Abilene, Ks

10-13-2003, 05:30 PM	#10
Hugger Registered User Join Date: Mar 2003 Location: Wichita, KS Posts: 137	I found what I needed. Thanks, for all the replies. Erik __________________ 72 LWB - Hugger Orange 350/350 3.73 Next; 335hp GM Crate



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.