NC ISO bed floor patch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**chevypoint** · 01-19-2017, 09:51 AM

I am looking for the bracket that is attached to the bed floor under the driver side B pillar.

**1rippen6** · 01-23-2017, 08:48 PM

Here is what I have 32 shipped for the one you need in a small flat rate box check the photo close they both have a thin spot on top

**chevypoint** · 02-13-2017, 09:14 AM

[QUOTE=1rippen6;7836226]Here is what I have 32 shipped for the one you need in a small flat rate box check the photo close they both have a thin spot on top[/QUOTE

Sorry, I haven't checked in lately and did not see your reply until now. I am interested in the drivers side bracket, How is the back of the bracket?

Also I Was wondering if you had a floor patch. It needs to be 24 inches long and 8 niches wide. See picture.

Thanks
Mark

**1rippen6** · 02-13-2017, 01:07 PM

I will get you a picture of the bottom and I have the floor piece also I will get a picture of that as well

**1rippen6** · 02-13-2017, 11:14 PM

Here you go look careful the edge of the corner piece is starting to push up it will probably have some thinning there but should be an easy fix. I can take some off the price of the corner piece if you get the floor patch since it would be ship together. The floor patch would be 30 plus shipping let me know if interested.

**chevypoint** · 02-15-2017, 08:49 AM

Quote:

Originally Posted by 1rippen6

Here you go look careful the edge of the corner piece is starting to push up it will probably have some thinning there but should be an easy fix. I can take some off the price of the corner piece if you get the floor patch since it would be ship together. The floor patch would be 30 plus shipping let me know if interested.

Ill take both pieces. Let me know final price with shipping to 28792 and i will get you paid.

Thanks
Mark

**1rippen6** · 02-15-2017, 08:57 AM

I will get the panel cut out and get a shipping quote in the next couple days.

**1rippen6** · 02-15-2017, 10:09 PM

Actually got it cut tonight 15 shipping so 75 total shipped will pm PP info

**chevypoint** · 02-22-2017, 11:41 AM

Quote:

Originally Posted by 1rippen6

Actually got it cut tonight 15 shipping so 75 total shipped will pm PP info

Received patches today. Everything looks good. Now to get them welded in.

Thank You
Mark

**1rippen6** · 02-22-2017, 09:29 PM

Good to hear thanks for the update

01-19-2017, 09:51 AM	#1
chevypoint Registered User Join Date: May 2011 Location: Hendersonville, nc Posts: 85	ISO bed floor patch I am looking for the bracket that is attached to the bed floor under the driver side B pillar. Attached Images __________________ 71 c20, 350/automatic 71 K5 Blazer, 350 3 speed (really my 16 yr old sons)http://67-72chevytrucks.com/vboard/s...d.php?t=686111 71 GMC build thread; http://67-72chevytrucks.com/vboard/s...d.php?t=468765 47 Chevy Aerosedan, 403 Olds/350 turbo 69 Camaro, 307/powerglide 06 Silverado Z71

01-23-2017, 08:48 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch Here is what I have 32 shipped for the one you need in a small flat rate box check the photo close they both have a thin spot on top Attached Images

02-13-2017, 09:14 AM	#3
chevypoint Registered User Join Date: May 2011 Location: Hendersonville, nc Posts: 85	Re: ISO bed floor patch [QUOTE=1rippen6;7836226]Here is what I have 32 shipped for the one you need in a small flat rate box check the photo close they both have a thin spot on top[/QUOTE Sorry, I haven't checked in lately and did not see your reply until now. I am interested in the drivers side bracket, How is the back of the bracket? Also I Was wondering if you had a floor patch. It needs to be 24 inches long and 8 niches wide. See picture. Thanks Mark Attached Images __________________ 71 c20, 350/automatic 71 K5 Blazer, 350 3 speed (really my 16 yr old sons)http://67-72chevytrucks.com/vboard/s...d.php?t=686111 71 GMC build thread; http://67-72chevytrucks.com/vboard/s...d.php?t=468765 47 Chevy Aerosedan, 403 Olds/350 turbo 69 Camaro, 307/powerglide 06 Silverado Z71 Last edited by chevypoint; 02-13-2017 at 09:28 AM.

02-13-2017, 01:07 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch I will get you a picture of the bottom and I have the floor piece also I will get a picture of that as well

02-13-2017, 11:14 PM	#5
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch Here you go look careful the edge of the corner piece is starting to push up it will probably have some thinning there but should be an easy fix. I can take some off the price of the corner piece if you get the floor patch since it would be ship together. The floor patch would be 30 plus shipping let me know if interested. Attached Images

02-15-2017, 08:57 AM	#7
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch I will get the panel cut out and get a shipping quote in the next couple days.

02-15-2017, 10:09 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch Actually got it cut tonight 15 shipping so 75 total shipped will pm PP info

02-22-2017, 09:29 PM	#10
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,783	Re: ISO bed floor patch Good to hear thanks for the update



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.