GA 1964 - 66 Auto column - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**southern parts** · 02-07-2017, 02:34 PM

This is for the column on the right. It is been taken apart cleaned, tightened, and bearings repacked. The shift tube is from a 67-72 Turbo 350/ 400 column. It has been shortened to fit this column. $250 plus shipping. Steering wheel not included in price.

**aotte1** · 02-07-2017, 08:21 PM

Woody,

The column looks nice for a three speed automatic conversion, good price too.

Attached are two photos, can you tell what application these auto linkage are for?

Thanks,
Les

**aotte1** · 02-07-2017, 08:22 PM

Doing the IPad so,only one photo at a time.

Les

**The Rocknrod** · 02-07-2017, 09:23 PM

Do you ever make these for a four speed transmission?

**southern parts** · 02-07-2017, 10:04 PM

Les- I'm pretty sure your linkage is for 63-66. auto with a powerglide

The Rocknrod - I have all the pieces to do a floor shift column if that's what you're talking about.

rvrfoot · 02-08-2017, 12:30 AM

How much to cali 92408?

LT1 Burb · 02-08-2017, 10:15 AM

Les, those are power glide brackets as mentioned, 63-66.

**The Rocknrod** · 02-08-2017, 10:20 AM

Quote:

Originally Posted by southern parts

...
The Rocknrod - I have all the pieces to do a floor shift column if that's what you're talking about.

Column shift, Four Speed Automatic is what I was referring to.

**southern parts** · 02-08-2017, 10:34 AM

Rvrfoot- it will be this weekend before I can get a shipping quote on the column. Do you want this Center steering shaft with it? The price of the column is the same with or without, the only difference will be the shipping cost.

The Rocknrod- sorry, no I don't have the pieces to do an overdrive column. Can you get an overdrive lens for 63 - 66?

rvrfoot · 02-08-2017, 12:57 PM

No problem for this weekend to get a shipping quote and yes just to column. thanks

**The Rocknrod** · 02-08-2017, 01:45 PM

Quote:

Originally Posted by southern parts

...
The Rocknrod- sorry, no I don't have the pieces to do an overdrive column. Can you get an overdrive lens for 63 - 66?

Does this work: http://www.shiftworks.com/lens.htm#nova
TH200-4R, TH700-R4 & 4L60

**southern parts** · 02-08-2017, 03:20 PM

I might have to try to do one. Just need to find an overdrive shift tube that will work

**The Rocknrod** · 02-08-2017, 04:00 PM

Quote:

Originally Posted by southern parts

I might have to try to do one. Just need to find an overdrive shift tube that will work

And I will wait with bated breath.

**southern parts** · 02-11-2017, 07:53 PM

Column sold to rvrfoot

Clif Dzzzz · 02-13-2017, 10:13 PM

Hey....Looking for a 1966 Chevy C-10 Automatic column assembly...a virgin would be ideal.....would need it complete with wheel, turn signal assembly, shaft etc. ....several that I have found have been abused by previous owners.......has to be 64-66....Will be using with TH350 Trans......

**southern parts** · 02-21-2017, 08:06 PM

Sorry, I don't have another 3-speed automatic column at this time. I do have this Powerglide automatic column with a 66 Deluxe wheel. $250 plus shipping on the column with or without the center shaft, $150 plus shipping on the steering wheel or $350 -plus shipping for both. They will have to be shipped in two separate boxes. The column has been taken apart cleaned and regreased, new lower bearing.

Clif Dzzzz · 02-22-2017, 12:45 AM

Can you provide a brief overview of the difference in Automatic TH350 columns and the Powerglide Columns.....whats so different? I realize the shifter indicators are different.......I'm confused....Thanks in advance.....

rvrfoot · 02-22-2017, 01:04 AM

The powergilde only shifts 2 times and the 350 shifts 3 times.

**southern parts** · 02-22-2017, 12:17 PM

The shift tube is made different but it can be used . You could only get an original 3 speed automatic column in 1966. And I think only in a 3/4 ton. Here's the only 2 pics I have in my phone showing the difference in the lower part of the shift tubes. The first one is for turbo 350/400. The second one is for a powerglide.

Clif Dzzzz · 02-22-2017, 10:02 PM

Hey...Southern Parts.....Thanks for the information and Lower Column Photo's...
I'll investigate in a few days and get back with ya.....

**southern parts** · 03-04-2017, 06:43 PM

Powerglide column sold locally

Clif Dzzzz · 03-04-2017, 09:59 PM

Hey....looking for a TH350 3 speed column.....know of a source....prefer a used OE model? Thanks in advance...

**southern parts** · 03-05-2017, 07:10 AM

No help on an original 66, 3 spd. auto column. I'll keep you in mind if I find one.

Clif Dzzzz · 03-05-2017, 10:24 AM

Hey....how about a 67-72 Chevy C-10 3 Speed TH350 Auto Column and possibly a matching wheel ?.......Thanks....

**southern parts** · 03-05-2017, 01:55 PM

I have a green one on the 67-72 parts board.

02-07-2017, 02:34 PM	#1
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	1964 - 66 Auto column This is for the column on the right. It is been taken apart cleaned, tightened, and bearings repacked. The shift tube is from a 67-72 Turbo 350/ 400 column. It has been shortened to fit this column. $250 plus shipping. Steering wheel not included in price. Attached Images

02-07-2017, 08:21 PM	#2
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 1964 - 66 Auto column Woody, The column looks nice for a three speed automatic conversion, good price too. Attached are two photos, can you tell what application these auto linkage are for? Thanks, Les Attached Images

02-07-2017, 08:22 PM	#3
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: 1964 - 66 Auto column Doing the IPad so,only one photo at a time. Les Attached Images

02-07-2017, 09:23 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 1964 - 66 Auto column Do you ever make these for a four speed transmission? __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

02-07-2017, 10:04 PM	#5
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column Les- I'm pretty sure your linkage is for 63-66. auto with a powerglide The Rocknrod - I have all the pieces to do a floor shift column if that's what you're talking about. Last edited by southern parts; 02-07-2017 at 10:50 PM.

02-08-2017, 12:30 AM	#6
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: 1964 - 66 Auto column How much to cali 92408?

02-08-2017, 10:15 AM	#7
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: 1964 - 66 Auto column Les, those are power glide brackets as mentioned, 63-66.

02-08-2017, 10:34 AM	#9
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column Rvrfoot- it will be this weekend before I can get a shipping quote on the column. Do you want this Center steering shaft with it? The price of the column is the same with or without, the only difference will be the shipping cost. The Rocknrod- sorry, no I don't have the pieces to do an overdrive column. Can you get an overdrive lens for 63 - 66?

02-08-2017, 12:57 PM	#10
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: 1964 - 66 Auto column No problem for this weekend to get a shipping quote and yes just to column. thanks

02-08-2017, 03:20 PM	#12
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column I might have to try to do one. Just need to find an overdrive shift tube that will work

02-11-2017, 07:53 PM	#14
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column Column sold to rvrfoot

02-13-2017, 10:13 PM	#15
Clif Dzzzz Registered User Join Date: Oct 2013 Location: Hernando, Ms. Posts: 67	Re: 1964 - 66 Auto column Hey....Looking for a 1966 Chevy C-10 Automatic column assembly...a virgin would be ideal.....would need it complete with wheel, turn signal assembly, shaft etc. ....several that I have found have been abused by previous owners.......has to be 64-66....Will be using with TH350 Trans...... Last edited by Clif Dzzzz; 02-19-2017 at 11:17 PM.

02-21-2017, 08:06 PM	#16
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column Sorry, I don't have another 3-speed automatic column at this time. I do have this Powerglide automatic column with a 66 Deluxe wheel. $250 plus shipping on the column with or without the center shaft, $150 plus shipping on the steering wheel or $350 -plus shipping for both. They will have to be shipped in two separate boxes. The column has been taken apart cleaned and regreased, new lower bearing. Attached Images

02-22-2017, 12:45 AM	#17
Clif Dzzzz Registered User Join Date: Oct 2013 Location: Hernando, Ms. Posts: 67	Re: 1964 - 66 Auto column Can you provide a brief overview of the difference in Automatic TH350 columns and the Powerglide Columns.....whats so different? I realize the shifter indicators are different.......I'm confused....Thanks in advance.....

02-22-2017, 01:04 AM	#18
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: 1964 - 66 Auto column The powergilde only shifts 2 times and the 350 shifts 3 times.



Register or Log In To remove these advertisements.

02-22-2017, 12:17 PM	#19
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column The shift tube is made different but it can be used . You could only get an original 3 speed automatic column in 1966. And I think only in a 3/4 ton. Here's the only 2 pics I have in my phone showing the difference in the lower part of the shift tubes. The first one is for turbo 350/400. The second one is for a powerglide. Attached Images

02-22-2017, 10:02 PM	#20
Clif Dzzzz Registered User Join Date: Oct 2013 Location: Hernando, Ms. Posts: 67	Re: 1964 - 66 Auto column Hey...Southern Parts.....Thanks for the information and Lower Column Photo's... I'll investigate in a few days and get back with ya.....

03-04-2017, 06:43 PM	#21
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column Powerglide column sold locally

03-04-2017, 09:59 PM	#22
Clif Dzzzz Registered User Join Date: Oct 2013 Location: Hernando, Ms. Posts: 67	Re: 1964 - 66 Auto column Hey....looking for a TH350 3 speed column.....know of a source....prefer a used OE model? Thanks in advance...

03-05-2017, 07:10 AM	#23
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column No help on an original 66, 3 spd. auto column. I'll keep you in mind if I find one.

03-05-2017, 10:24 AM	#24
Clif Dzzzz Registered User Join Date: Oct 2013 Location: Hernando, Ms. Posts: 67	Re: 1964 - 66 Auto column Hey....how about a 67-72 Chevy C-10 3 Speed TH350 Auto Column and possibly a matching wheel ?.......Thanks....

03-05-2017, 01:55 PM	#25
southern parts Senior Member Join Date: Apr 2003 Location: Elberton Ga. Posts: 3,471	Re: 1964 - 66 Auto column I have a green one on the 67-72 parts board.

Register or Log In To remove these advertisements.