No load flasher question. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Kinger615 · 02-25-2017, 01:18 AM

Just installed new LED parking and tail lights on my 63 and having a issue. I'm only getting my front markers to flash. When I disconnect the front I can get the rear to flash. I can not get the front and rear to go off together. Any ideas on what could be the issue? Is it a flasher issue or a ground?

MikeS. · 02-25-2017, 02:56 AM

LED lights take a special flasher, you should be able to get one pretty cheap at any parts store. My 63 had the same issue.

1966c10shrtbd · 02-25-2017, 12:13 PM

http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=62

Kinger615 · 02-25-2017, 12:19 PM

thanks for the replies but I forgot to mention that I'm already running a no load flasher...it's a cheaper one so I wonder if quality matters. Its called "keep it clean" was only 10 dollars compared to others around 30+. Just wondering if anyone was had the same issue
Posted via Mobile Device

hotrodder · 02-25-2017, 10:16 PM

You will need to buy one from another source. I used a Keep-It Clean wiring kit on a street rod I built and the flasher they sent with the kit that was supposed to support the LED bulbs that I also bought from them wouldn't work.

rvrfoot · 02-26-2017, 12:36 AM

I had the same problem. I got one with a ground wire on it. Works good now.

02-25-2017, 01:18 AM	#1
Kinger615 Registered User Join Date: Dec 2015 Location: Napa,ca Posts: 23	No load flasher question. Just installed new LED parking and tail lights on my 63 and having a issue. I'm only getting my front markers to flash. When I disconnect the front I can get the rear to flash. I can not get the front and rear to go off together. Any ideas on what could be the issue? Is it a flasher issue or a ground?

02-25-2017, 02:56 AM	#2
MikeS. Registered User Join Date: Sep 2011 Location: FarEastern WVa Posts: 1,691	Re: No load flasher question. LED lights take a special flasher, you should be able to get one pretty cheap at any parts store. My 63 had the same issue. __________________ Past Master Triluminar Lodge #117 GL of WVa My 1963 4x4 Suburban build; http://67-72chevytrucks.com/vboard/s...d.php?t=531274 My Gallery, now with pics of my 1966 C30 motorhome. http://67-72chevytrucks.com/gallery/...&ppuser=103447

02-25-2017, 12:13 PM	#3
1966c10shrtbd Registered User Join Date: Sep 2005 Location: Lincoln, Nebraska Posts: 75	Re: No load flasher question. http://www.lmctruck.com/icatalog/cbe/full.aspx?Page=62

02-25-2017, 10:16 PM	#5
hotrodder Registered User Join Date: Oct 2011 Location: Bloomington Indiana Posts: 322	Re: No load flasher question. You will need to buy one from another source. I used a Keep-It Clean wiring kit on a street rod I built and the flasher they sent with the kit that was supposed to support the LED bulbs that I also bought from them wouldn't work.

02-26-2017, 12:36 AM	#6
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: No load flasher question. I had the same problem. I got one with a ground wire on it. Works good now.

02-25-2017, 12:19 PM	#4
Kinger615 Registered User Join Date: Dec 2015 Location: Napa,ca Posts: 23	thanks for the replies but I forgot to mention that I'm already running a no load flasher...it's a cheaper one so I wonder if quality matters. Its called "keep it clean" was only 10 dollars compared to others around 30+. Just wondering if anyone was had the same issue Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.