SD 67 4x4 longbox frame, axles & t-case - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**67 cst swb** · 03-02-2017, 06:40 PM

I have a 1967 4x4 frame with both F & R axles, MT trans, transfer-case and drive shafts.
It has a cab and front clip on it, but nothing is usable (cab, doors, fenders, hood, grille... are all beat-up terribly)
So you are buying only the frame and everything attached effectively.

$$ MAKE PRETTY MUCH ANY OFFER $$

Located in Rapid City, in Western SD

What is there:
Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left
Transfer Case - including floor shifter
SMxxx manual transmission - whatever a 67 had
Rear Axle - complete
Front Axle - this is the type with lock in/lock out selector
Drive Shafts - both F & R
Leaf Springs - F & R

**atog** · 03-02-2017, 06:48 PM

Nice project to have Curious what it ends up selling for

**67 cst swb** · 03-02-2017, 07:10 PM

My thought is it will be selling for cheap. LOL

**atog** · 03-02-2017, 07:22 PM

That's a diamond in the rough Not many made

CG · 03-02-2017, 11:47 PM

How much do you want for the mag wheels?

**67 cst swb** · 03-03-2017, 02:57 PM

Quote:

Originally Posted by CG

How much do you want for the mag wheels?

They are supposedly jeep wheels.
make me an offer...

bluek5 · 03-03-2017, 03:38 PM

Yep, Jeep 15x7

**Vero67** · 03-04-2017, 08:37 AM

Wow there were only about 3300 factory k10 lond bed trucks produced in 1967. Can't be too many left. Rare project for somebody.

Vintage Windmills · 03-04-2017, 10:33 PM

Hello,
What engine did it have? Power steering? Title? Any trips towards Minnesota planned? I'd grab it but it would be a long trip that it's hard to find time for.

CG · 03-04-2017, 11:06 PM

Not interested if they are the jeep wheels. But thanks for letting me know.

**67 cst swb** · 03-08-2017, 05:34 PM

Quote:

Originally Posted by Vintage Windmills

Hello,
What engine did it have? Power steering? Title? Any trips towards Minnesota planned? I'd grab it but it would be a long trip that it's hard to find time for.

Engine: no idea
Power Steering: Nothing there if it even was equipt
Title: No
Trips to Minn: Not until Back to the 50's

jaybatta · 03-08-2017, 06:11 PM

Consider selling the 4wd lockouts if they're both there?

**67 cst swb** · 03-08-2017, 06:20 PM

Quote:

Originally Posted by jaybatta

Consider selling the 4wd lockouts if they're both there?

Well.... Yes...
But you might have to take everything attached also... LOL

jaybatta · 03-08-2017, 06:21 PM

Haha fair enough

**67 cst swb** · 03-08-2017, 06:59 PM

Quote:

Originally Posted by jaybatta

Haha fair enough

What would these be worth to you?

jaybatta · 03-08-2017, 07:09 PM

I was thinking $100 shipped to Livingston Montana

67-4x4 · 03-08-2017, 11:04 PM

How much I'm a sucker for these

**67 cst swb** · 03-09-2017, 02:26 PM

Quote:

Originally Posted by 67-4x4

How much I'm a sucker for these

make me an offer

countr · 03-09-2017, 02:40 PM

You are a long way from southern Iowa, but how about $200? Picked up sometime in April? Thanks Russ

**67 cst swb** · 03-09-2017, 02:58 PM

Quote:

Originally Posted by countr

You are a long way from southern Iowa, but how about $200? Picked up sometime in April? Thanks Russ

$200 sound good to me...
I am busy the week of Apr 8th thru Apr 16th.
But anytime before or after, even into May is fine with me.

SOLD
Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left
Transfer Case - including floor shifter
SMxxx manual transmission - whatever a 67 had
Rear Axle - complete
Front Axle - this is the type with lock in/lock out selector
Drive Shafts - both F & R
Leaf Springs - F & R

countr · 03-09-2017, 03:06 PM

Thanks, please pm your address. Looks like I have another project!

**67 cst swb** · 03-09-2017, 03:09 PM

Quote:

Originally Posted by countr

Thanks, please pm your address. Looks like I have another project!

All my stuff is stored at a friends house East of Ellsworth AFB. I will just have to give you directions once you get here.

03-02-2017, 06:40 PM	#1
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	67 4x4 longbox frame, axles & t-case I have a 1967 4x4 frame with both F & R axles, MT trans, transfer-case and drive shafts. It has a cab and front clip on it, but nothing is usable (cab, doors, fenders, hood, grille... are all beat-up terribly) So you are buying only the frame and everything attached effectively. $$ MAKE PRETTY MUCH ANY OFFER $$ Located in Rapid City, in Western SD What is there: Frame - longbox, box sides are gone, was a wood floor only a few crossmembers left Transfer Case - including floor shifter SMxxx manual transmission - whatever a 67 had Rear Axle - complete Front Axle - this is the type with lock in/lock out selector Drive Shafts - both F & R Leaf Springs - F & R __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White Last edited by 67 cst swb; 03-03-2017 at 03:13 PM.

03-02-2017, 06:48 PM	#2
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,522	Re: 67 4x4 longbox frame, axles & t-case Nice project to have Curious what it ends up selling for

03-02-2017, 07:10 PM	#3
67 cst swb Senior Member Join Date: Nov 2001 Location: Rapid City, SD Posts: 2,281	Re: 67 4x4 longbox frame, axles & t-case My thought is it will be selling for cheap. LOL __________________ My Trucks: 1967 Chevrolet Short Wide Box 327 TH350 9" w/3.90 gears paint will be White - Current Project 1967 Chevrolet Custom LWB 283 TH400 3.73 Posi, no-AC, no-PS, no-PB, bench-seat, small-window - mostly orig driver 1967 Chevrolet CST LWB originally a 327 TH400 3.73 Posi AC PS PB, had Buddy Buckets, Small Window - parts truck 1967 Chevrolet CST LWB, 283 MT 3.73 had Buddy Buckets, Panoramic Window - parts truck 2001 Chevrolet 3500 2WD Crew Cab Dually 8.1L Allison White

03-02-2017, 07:22 PM	#4
atog Senior Member Join Date: Feb 2016 Location: burbank ohio Posts: 2,522	Re: 67 4x4 longbox frame, axles & t-case That's a diamond in the rough Not many made

03-02-2017, 11:47 PM	#5
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,841	Re: 67 4x4 longbox frame, axles & t-case How much do you want for the mag wheels? __________________ … … … … … … … … ... … … … … … … … … … … …

03-03-2017, 03:38 PM	#7
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 67 4x4 longbox frame, axles & t-case Yep, Jeep 15x7 Attached Images

03-04-2017, 08:37 AM	#8
Vero67 Registered User Join Date: May 2013 Location: Vero Beach FL Posts: 290	Re: 67 4x4 longbox frame, axles & t-case Wow there were only about 3300 factory k10 lond bed trucks produced in 1967. Can't be too many left. Rare project for somebody.

03-04-2017, 10:33 PM	#9
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: 67 4x4 longbox frame, axles & t-case Hello, What engine did it have? Power steering? Title? Any trips towards Minnesota planned? I'd grab it but it would be a long trip that it's hard to find time for.

03-04-2017, 11:06 PM	#10
CG BlahBlahBlah Join Date: Feb 2002 Location: Wa. Posts: 19,841	Re: 67 4x4 longbox frame, axles & t-case Not interested if they are the jeep wheels. But thanks for letting me know. __________________ … … … … … … … … ... … … … … … … … … … … …

03-08-2017, 06:11 PM	#12
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: 67 4x4 longbox frame, axles & t-case Consider selling the 4wd lockouts if they're both there? __________________ Joe 1968 K20 1970 K20 Semper Fi

03-08-2017, 06:21 PM	#14
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: 67 4x4 longbox frame, axles & t-case Haha fair enough __________________ Joe 1968 K20 1970 K20 Semper Fi

03-08-2017, 07:09 PM	#16
jaybatta Registered User Join Date: Apr 2014 Location: Livingston, MT Posts: 837	Re: 67 4x4 longbox frame, axles & t-case I was thinking $100 shipped to Livingston Montana __________________ Joe 1968 K20 1970 K20 Semper Fi

03-08-2017, 11:04 PM	#17
67-4x4 Registered User Join Date: Sep 2012 Location: moon twp pa Posts: 187	Re: 67 4x4 longbox frame, axles & t-case How much I'm a sucker for these

03-09-2017, 02:40 PM	#19
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,009	Re: 67 4x4 longbox frame, axles & t-case You are a long way from southern Iowa, but how about $200? Picked up sometime in April? Thanks Russ

03-09-2017, 03:06 PM	#21
countr Registered User Join Date: Dec 2015 Location: Russell, Iowa Posts: 2,009	Re: 67 4x4 longbox frame, axles & t-case Thanks, please pm your address. Looks like I have another project!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.