bag mount questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

crazy4chevs · 10-17-2003, 01:06 PM

Im thinking about going with bags,and heres my question.

Does anybody have their bag mounts not installed yet?

Iam thinking of trying to make my bag mounts myself.

Can anybody measure their mounts and send me the dimensions?

front and rear mounts if possible.

Pic is attached to show what I need.

I know its a lot to ask but it would be greatly appreciated!

send to: jenning_2000@yahoo.com OR
JNL@nocharge.com

Thanks, Lance

JHickson6 · 10-17-2003, 01:21 PM

As far as i know those weird shaped brackets are the ones that bolt to the lower control arm, so you could plans those out by tracing one of your arms, marking the bolt holes etc. The others are the regular cups and plates that you see everywhere, if you had a bag you could measure them all up, and it wouldn't be a problem. I'd help ya, but i don't have any bags here either

Is that the pic of the turner enterprises kit?
Jared

Captkaos · 10-17-2003, 01:24 PM

I made mine myself. One for my '73 and one for a friends '70.

**N2TRUX** · 10-17-2003, 04:34 PM

Quote:

Originally posted by JHickson6
As far as i know those weird shaped brackets are the ones that bolt to the lower control arm,...

Actually those are the upper mounting plates. They bolt to the bottom of spring pocket....

JHickson6 · 10-17-2003, 06:14 PM

"COCK, BALLS" - Will Ferrell

10-17-2003, 01:06 PM	#1
crazy4chevs Registered User Join Date: Oct 2002 Location: Des Moines WA. (Kent, area) Posts: 668	bag mount questions Im thinking about going with bags,and heres my question. Does anybody have their bag mounts not installed yet? Iam thinking of trying to make my bag mounts myself. Can anybody measure their mounts and send me the dimensions? front and rear mounts if possible. Pic is attached to show what I need. I know its a lot to ask but it would be greatly appreciated! send to: jenning_2000@yahoo.com OR JNL@nocharge.com Thanks, Lance Attached Images __________________ 70 chev c10 swb fleet 72 grill, sb 400, 2/4 drop. 68 chev c10 swb fleet Early classic 4/6 drop with 4wheel disc brakes 9"rear 67-8 buckets tilt and A/C Classic GM Truck Club of Washington . Last edited by crazy4chevs; 10-17-2003 at 01:10 PM.

10-17-2003, 01:21 PM	#2
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	As far as i know those weird shaped brackets are the ones that bolt to the lower control arm, so you could plans those out by tracing one of your arms, marking the bolt holes etc. The others are the regular cups and plates that you see everywhere, if you had a bag you could measure them all up, and it wouldn't be a problem. I'd help ya, but i don't have any bags here either Is that the pic of the turner enterprises kit? Jared __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!

10-17-2003, 01:24 PM	#3
Captkaos www.73-87chevytrucks.com Join Date: Dec 1999 Location: Birmingham, AL Posts: 6,935	I made mine myself. One for my '73 and one for a friends '70. __________________ Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com

10-17-2003, 06:14 PM	#5
JHickson6 I Love This Stuff! Join Date: May 2002 Location: Winnipeg, Manitoba, Canada Posts: 739	"COCK, BALLS" - Will Ferrell __________________ My Rides 1967 C10 In Pieces for now 1985 Ford B700 SourPuss Bus - BIG BLUE 2003 Silverado CITY WORKER YELLOW!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.