One piece door window problems - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bevos68bowtie · 03-21-2017, 01:17 PM

I have the One Piece Products door glass kit and have installed them but they are hard to roll up and the windows lean in towards the inside of cab. OPP says the reregulators may be bad for the hard to roll up problem. Any ideas?
Thanks a lot!

davepl · 03-21-2017, 01:25 PM

If it was the regulators wouldn't they have been hard to roll up before the conversion too then?

Try rolling it up with one hand while pulling up on the glass with the other. If it's still like you're working against more than gravity, I don't think it's the regulators, probably more like too much friction in the channels/tracks that it runs in. Just a guess though.

weq92f · 03-21-2017, 02:48 PM

My truck has a one piece electric kit in it and it does the exact same thing:

1) windows will not go up without help, a lot of help.

2) when they are not all the way up or down, the glass leans in toward the interior

My opinion is that while one piece looks cool, the original wing glass is cool. I'll be seriously considering going back to original once I get a number of other projects completed.

-klb

**GR8-68** · 03-21-2017, 07:57 PM

I never thought this was a good idea since they came out with them. Has anyone had success with these one piece windows ?

03-21-2017, 01:17 PM	#1
bevos68bowtie Registered User Join Date: Feb 2011 Location: Texarkana, Texas Posts: 35	One piece door window problems I have the One Piece Products door glass kit and have installed them but they are hard to roll up and the windows lean in towards the inside of cab. OPP says the reregulators may be bad for the hard to roll up problem. Any ideas? Thanks a lot! __________________ 67 C10 step side 355ci 05 Z71 reg cab short fleet side

03-21-2017, 01:25 PM	#2
davepl Registered User Join Date: Aug 2006 Location: Redmond, WA Posts: 6,332	Re: One piece door window problems If it was the regulators wouldn't they have been hard to roll up before the conversion too then? Try rolling it up with one hand while pulling up on the glass with the other. If it's still like you're working against more than gravity, I don't think it's the regulators, probably more like too much friction in the channels/tracks that it runs in. Just a guess though. __________________ 1970 GMC Sierra Grande Custom Camper - Built, not Bought 1969 Pontiac 2+2 427/390 4-speed Coupe 1969 Pontiac 2+2 427/390 4-speed Convertible

03-21-2017, 02:48 PM	#3
weq92f Registered User Join Date: Oct 2016 Location: Dallas Texas Posts: 3,219	Re: One piece door window problems My truck has a one piece electric kit in it and it does the exact same thing: 1) windows will not go up without help, a lot of help. 2) when they are not all the way up or down, the glass leans in toward the interior My opinion is that while one piece looks cool, the original wing glass is cool. I'll be seriously considering going back to original once I get a number of other projects completed. -klb __________________ 67 C10 fleet fuel injected '70 402, 700r4, 3.73 posi 07 335 sport turbo 6sp 94 Trans Am GT LT1 6sp posi -- sold after 22yrs 99 540 sport V8 6sp -- sold 73 240z L24 4sp -- given to friend 68 C10 step 350/350 3.73 open -- sold

03-21-2017, 07:57 PM	#4
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: One piece door window problems I never thought this was a good idea since they came out with them. Has anyone had success with these one piece windows ? __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.