4x4 to 2x4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

swede413 · 10-18-2003, 02:10 AM

At the risk of being yelled and screamed for cuting up a good 4x4 I am thinking of converting my 70 blazer to two wheel drive. have any of you done this? any hints or problems you ran acrossed

**BIG ORANGE** · 10-18-2003, 08:15 PM

I just bought this 71 and would like to do the same thing!

blue_69 · 10-19-2003, 08:50 AM

This has been talked about a few times on the board. What i am told is that the front crossmember from a 2 wheel drive truck will bolt right up to the frame with very few modifications. The rear is very difficult to convert to a coil spring setup , the stock 2 wheel blazers were all coil spring, but if you are happy with the leafs you can leave them alone. You will also need a tranny setup for 2 wheel or if you have an auto you can have it converted if you are going to have it rebuilt anyway. Just add the right driveshaft after that and you should be good to go.

have fun,
jason

swede413 · 10-19-2003, 10:52 AM

Great minds think alike orange

Thanks jason what I was wondering is if Im limited to useing a frountend of a 71/72 truck "disk brakes" or if there are any orther more available doners I could use. A friend and I are installing a camaro frount end to his 53 panel but I would rather not hack my frame off
Thanks Eric

blue_69 · 10-19-2003, 02:54 PM

I'm pretty sure the front crossmember will fit from any chevy 2 wheel truck up until the late 80's. It seems i remember reading that you have to drill a couple holes for the 73+ crossmember to mount to the frame. I was planning on doing this so i did some reading on it but i decided to just keep mine pretty much stock and maybe i'll go nuts on another one later down the road when i have some more money on tap.

jason

**raggedjim** · 10-23-2003, 12:18 PM

Swede, This is just a thought, but I don't see why a regular truck frame couldn't be cut to fit. Maybe the cab mounts are different, but lots of long wheel bases have been converted to short, and I think you could do the same , long or short, to blazer. Think I'll take a look at the frames I have...

Rg

Chris H · 10-23-2003, 01:25 PM

If any of you guys are interested and want to drive to lovely Rochester, MN... I have a factory 2 wheel drive blazer frame that I would sell.
I have the complete rolling chassis, vin tag and glove box door, and a bill of sale from the salvage yard I bought it from. No title. It is a 71 or 72 (5 lug/disc brakes on front). Very solid and straight, but would need a complete restoration and 1 or 2 of the mounts replaced.

Something to think about... could save you a lot of time.

Chris H.

10-18-2003, 02:10 AM	#1
swede413 Registered User Join Date: Apr 2001 Location: Las Vegas NV Posts: 183	4x4 to 2x4 At the risk of being yelled and screamed for cuting up a good 4x4 I am thinking of converting my 70 blazer to two wheel drive. have any of you done this? any hints or problems you ran acrossed __________________ 70 blazer 350 3on tree 98 GMC 3/4 ton 4x4 5 speed manual

10-18-2003, 08:15 PM	#2
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,764	I just bought this 71 and would like to do the same thing! __________________ Things happen for a reason!

10-19-2003, 08:50 AM	#3
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	This has been talked about a few times on the board. What i am told is that the front crossmember from a 2 wheel drive truck will bolt right up to the frame with very few modifications. The rear is very difficult to convert to a coil spring setup , the stock 2 wheel blazers were all coil spring, but if you are happy with the leafs you can leave them alone. You will also need a tranny setup for 2 wheel or if you have an auto you can have it converted if you are going to have it rebuilt anyway. Just add the right driveshaft after that and you should be good to go. have fun, jason __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

10-19-2003, 10:52 AM	#4
swede413 Registered User Join Date: Apr 2001 Location: Las Vegas NV Posts: 183	Great minds think alike orange Thanks jason what I was wondering is if Im limited to useing a frountend of a 71/72 truck "disk brakes" or if there are any orther more available doners I could use. A friend and I are installing a camaro frount end to his 53 panel but I would rather not hack my frame off Thanks Eric __________________ 70 blazer 350 3on tree 98 GMC 3/4 ton 4x4 5 speed manual

10-19-2003, 02:54 PM	#5
blue_69 someday Join Date: Dec 2001 Location: canastota,new york Posts: 629	I'm pretty sure the front crossmember will fit from any chevy 2 wheel truck up until the late 80's. It seems i remember reading that you have to drill a couple holes for the 73+ crossmember to mount to the frame. I was planning on doing this so i did some reading on it but i decided to just keep mine pretty much stock and maybe i'll go nuts on another one later down the road when i have some more money on tap. jason __________________ Click Here to search ebay for all 67-72 parts My 72 CST blazer build 72 CST Blazer 4x4 67 2wd swb ( project onion crate ) 86 4x4 lwb plow truck 40 x 60 foot barn to work on all this stuff

10-23-2003, 12:18 PM	#6
raggedjim Senior Member Join Date: Jun 2002 Location: Murray, Kentucky Posts: 3,476	Swede, This is just a thought, but I don't see why a regular truck frame couldn't be cut to fit. Maybe the cab mounts are different, but lots of long wheel bases have been converted to short, and I think you could do the same , long or short, to blazer. Think I'll take a look at the frames I have... Rg __________________ Roger '68 Short step - https://67-72chevytrucks.com/vboard/...d.php?t=849675 '69 ('70?) 2wd Blazer '70 GMC Jimmy 2wd '73 Firebird - https://67-72chevytrucks.com/vboard/...d.php?t=853203

10-23-2003, 01:25 PM	#7
Chris H 72 C30 Trailer Queen Join Date: Dec 1999 Location: SE MN, USA Posts: 794	K5 2x4... C5? If any of you guys are interested and want to drive to lovely Rochester, MN... I have a factory 2 wheel drive blazer frame that I would sell. I have the complete rolling chassis, vin tag and glove box door, and a bill of sale from the salvage yard I bought it from. No title. It is a 71 or 72 (5 lug/disc brakes on front). Very solid and straight, but would need a complete restoration and 1 or 2 of the mounts replaced. Something to think about... could save you a lot of time. Chris H.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.