Pertronix conversion..... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lux hauler · 10-18-2003, 09:00 PM

Does anyone here have any experience with it?
I was thinking of trying their conversion kit and coil on my Cad 500. I don't really want a big HEI sitting right at the front of the motor.

BigBlack68 · 10-18-2003, 09:36 PM

i have it on my 350,it works real good,im gonna go get one for my cad motor too

**JIMs70GMC** · 10-18-2003, 09:54 PM

Have one also installed almost 2 years ago. Working fine. I got one of their coils also.

jjk3 · 10-18-2003, 10:02 PM

Ditto for me on my 250. I also have one of their coils.

gashog · 10-18-2003, 11:24 PM

I have em on all my points vehicles, trouble free and easy to install.

lux hauler · 10-19-2003, 01:31 AM

Cool!!
Thanks for the info......I called Summit. The "Big Brown Truck" should have the stuff here in a few days. I ordered the igniter, coil, MSD wires, new rotor and a red dist. cap. It's gunna look sooo purty. I'm not gunna want to put it in the truck.

I'm going to paint the motor Caddy dark blue. I've already ordered chrome valve covers and stainless 12 pt. fasteners. The little bit of red in the cap and wires should set it off pretty well.

Blue Beard · 10-19-2003, 09:29 AM

Looking purty don't make it go faster.......but a woman might buy it lookin purty...........

lux hauler · 10-19-2003, 09:39 AM

Quote:

Originally posted by Blue Beard
Looking purty don't make it go faster.......but a woman might buy it lookin purty...........

You're right but the 514 cubic inches inside of that purty package will make it fast.

10-18-2003, 09:00 PM	#1
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Pertronix conversion..... Does anyone here have any experience with it? I was thinking of trying their conversion kit and coil on my Cad 500. I don't really want a big HEI sitting right at the front of the motor. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

10-18-2003, 09:36 PM	#2
BigBlack68 Negative Camber Join Date: May 2003 Location: Clearwater,Fla Posts: 117	i have it on my 350,it works real good,im gonna go get one for my cad motor too __________________ 68 c20 64 cadillac coupe deville 64 cadillac sedan deville two 84 50th anniversary nissan 300zx tubos 98 S-10 ex-cab,my 4 cyl daily driver

10-18-2003, 09:54 PM	#3
JIMs70GMC user # 2756 Join Date: Jun 2001 Location: Chesapeake, Virginia Posts: 4,612	Have one also installed almost 2 years ago. Working fine. I got one of their coils also. __________________ 1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs 1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX 1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears 1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now..... 1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone. 1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed. 1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm

10-18-2003, 10:02 PM	#4
jjk3 It's just a check engine lamp. Join Date: Apr 2001 Location: Melbourne, FL Posts: 311	Ditto for me on my 250. I also have one of their coils. __________________ Active Inliner---bigchevy66 68 SWB Stepside 250 L6/3 on the floor/ Hedman headers, HEI, MSD 6A box, K&N filter, Offy intake and Edelbrock 600cfm 4 barrel Soon to have: WC T-5 five speed 66 SWB Stepside-undergoing restoration

10-18-2003, 11:24 PM	#5
gashog Active Member Join Date: Oct 2002 Location: Lake co. california Posts: 192	I have em on all my points vehicles, trouble free and easy to install. __________________ 69 Custom/10 454 Turbo 400 and 70 Custom/20 350 Turbo 350, 73 cheyanne C/10 also 69 camaro Z/28 and 85 Iroc Z

10-19-2003, 01:31 AM	#6
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Cool!! Thanks for the info......I called Summit. The "Big Brown Truck" should have the stuff here in a few days. I ordered the igniter, coil, MSD wires, new rotor and a red dist. cap. It's gunna look sooo purty. I'm not gunna want to put it in the truck. I'm going to paint the motor Caddy dark blue. I've already ordered chrome valve covers and stainless 12 pt. fasteners. The little bit of red in the cap and wires should set it off pretty well. __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

10-19-2003, 09:29 AM	#7
Blue Beard Registered User Join Date: Jan 2003 Location: Washington State Posts: 8,834	Looking purty don't make it go faster.......but a woman might buy it lookin purty........... __________________ 1970 Chev CST 2003 Harley Fatboy 1975 Chevrolet Step Van 1956 Chev Bel Air 1977 Blazer 2WD For Sale $3000.00 1978 Blazer 2WD For Sale $7000.00 1978 Silverado 2005 Monte Carlo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.