Will these speakers work for my stock 71 AM radio? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MattyBs71 · 06-01-2017, 02:58 PM

Looking for a replacement speaker to work with my stock AM radio in my 1971 C10.

Are these what I need?

http://www.ebay.com/itm/2-DELCO-4x10...3D401326009334

**FirstOwner69** · 06-01-2017, 07:32 PM

If you have the original mounting provision and want a speaker with moderate improvement over the original you want the 4" x 10" special rectangle here:
http://www.turnswitch.com/speakers.htm

MattyBs71 · 06-01-2017, 10:58 PM

Thank you this is exactly what I needed. I will call them

Coley · 06-02-2017, 10:03 AM

My understanding was that the ohm rating of the speaker(s) needs to match that of the radio or you may wreck/defeat some of the circuitry, and I'm not sure what the original ohm rating of the radio is.

Coley

MattyBs71 · 06-02-2017, 07:23 PM

First Owner 69 . I ordered one today! Thanks again!

**FirstOwner69** · 06-02-2017, 08:57 PM

Quote:

Originally Posted by Coley

My understanding was that the ohm rating of the speaker(s) needs to match that of the radio or you may wreck/defeat some of the circuitry, and I'm not sure what the original ohm rating of the radio is.

Coley

Correct. In fact the AM radios I have say "do not operate without 8-10 ohm speaker" on the top. The speaker I linked above is 10 ohms.

Quote:

Originally Posted by MattyBs71

First Owner 69 . I ordered one today! Thanks again!

Sounds good... pun intended. I didn't mention in my post that I have one and it performs very well.

06-01-2017, 02:58 PM	#1
MattyBs71 Registered User Join Date: Apr 2008 Location: Buckley, Washington Posts: 333	Will these speakers work for my stock 71 AM radio? Looking for a replacement speaker to work with my stock AM radio in my 1971 C10. Are these what I need? http://www.ebay.com/itm/2-DELCO-4x10...3D401326009334

06-01-2017, 07:32 PM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,843	Re: Will these speakers work for my stock 71 AM radio? If you have the original mounting provision and want a speaker with moderate improvement over the original you want the 4" x 10" special rectangle here: http://www.turnswitch.com/speakers.htm

06-01-2017, 10:58 PM	#3
MattyBs71 Registered User Join Date: Apr 2008 Location: Buckley, Washington Posts: 333	Re: Will these speakers work for my stock 71 AM radio? Thank you this is exactly what I needed. I will call them

06-02-2017, 10:03 AM	#4
Coley Registered User Join Date: Oct 2011 Location: Victoria, B.C Posts: 3,794	Re: Will these speakers work for my stock 71 AM radio? My understanding was that the ohm rating of the speaker(s) needs to match that of the radio or you may wreck/defeat some of the circuitry, and I'm not sure what the original ohm rating of the radio is. Coley __________________ ....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500

06-02-2017, 07:23 PM	#5
MattyBs71 Registered User Join Date: Apr 2008 Location: Buckley, Washington Posts: 333	Re: Will these speakers work for my stock 71 AM radio? First Owner 69 . I ordered one today! Thanks again!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.