Saved a couple more rustbuckets... c-10, jimmy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 06-10-2017, 08:19 PM

Its too bad everything you find in MN is basically for parts. Hauled these in this week, no time to part right now, so nothing is for sale. Up first, The c-10...

I think the tailgate was pretty nice before it was outside the chicken coop for the last 20+ years. One trailing arm is kind of "Z" shaped... 6 cyl 3speed supposedly run but has trans linkage issues. Not much good on it. 70 model.

**too much stuff** · 06-10-2017, 08:21 PM

Gate...

**too much stuff** · 06-10-2017, 08:27 PM

The 72 jimmy... Someone added a lot of goodies to this over the years. VERY rusty. (see pics!) Again, supposedly ran when parked. (like all of them) but the drivers door hasn't been opened in years because of rust. Does not have a drivers side hood hinge because there is nowhere to bolt it to! Lots of good parts, but no body panels.

**too much stuff** · 06-10-2017, 08:29 PM

Couple more...

**68bowtie** · 06-10-2017, 09:25 PM

that tailgates beautiful

72 tigger · 06-10-2017, 09:26 PM

MN is a lot like Indiana- rusted to oblivion. Glad you can save some of the good stuff

72chevynut · 06-10-2017, 09:27 PM

Cool, it's always fun to drag those rough ones home for spare parts. Especially when they have some rare options on them. When you do decide to part I would be interested in the Jimmy radio antenna if available.

**'68OrangeSunshine** · 06-11-2017, 01:11 AM

At least the top and lift gate hatch are not rustable.

**too much stuff** · 06-11-2017, 01:24 PM

Quote:

Originally Posted by 68bowtie

that tailgates beautiful

It is nice considering it sat outside for 20 years.

Quote:

Originally Posted by 72 tigger

MN is a lot like Indiana- rusted to oblivion. Glad you can save some of the good stuff

Gotta try to save something off them.

Quote:

Originally Posted by 72chevynut

Cool, it's always fun to drag those rough ones home for spare parts. Especially when they have some rare options on them. When you do decide to part I would be interested in the Jimmy radio antenna if available.

The jimmy has some nice parts and I need an interior for one, so it will work out good.

Quote:

Originally Posted by '68OrangeSunshine

At least the top and lift gate hatch are not rustable.

True, but all the hardware to remove them is! Rust sucks...

cypressbog · 06-13-2017, 02:11 PM

Nice 72 only cruise master!

**georgieb51** · 06-13-2017, 06:34 PM

Quote:

Originally Posted by too much stuff

Gate...

Do you have any plans to sell this tailgate? I am interested.

stsalvage · 06-13-2017, 08:48 PM

Some times i yell at people for parting out really nice trucks just to make a profit.You on the other hand i like to shake your hand.If i lived back where you live I be doing the same thing.Been in the scrap and salvage for more then 20 years.I'm not one for parting out a car or truck that still has life to live.Keep up the good work.

Try and save them all instead of going to the junker

Shinysideup · 06-13-2017, 09:26 PM

Quote:

Originally Posted by georgieb51

Do you have any plans to sell this tailgate? I am interested.

Didnt take long to become a for sale ad but what could you expect with a thread like this?

**FleetsidePaul** · 06-13-2017, 09:34 PM

Shame about that Jimmy. It looked like it was real nice, but WHOA! that's a lot of rust.

**too much stuff** · 06-14-2017, 09:08 PM

Quote:

Originally Posted by cypressbog

Nice 72 only cruise master!

Matches the hooks on front...

Quote:

Originally Posted by stsalvage

Some times i yell at people for parting out really nice trucks just to make a profit.You on the other hand i like to shake your hand.If i lived back where you live I be doing the same thing.Been in the scrap and salvage for more then 20 years.I'm not one for parting out a car or truck that still has life to live.Keep up the good work.

Try and save them all instead of going to the junker

I understand you need good parts to build good trucks, but hard to save Minnesota trucks sometimes...

Quote:

Originally Posted by Shinysideup

Didnt take long to become a for sale ad but what could you expect with a thread like this?

Even says nothing for sale in the first paragraph... Usually my threads like this are well behaved. I just like to show what is out there if you put your time in.

Quote:

Originally Posted by FleetsidePaul

Shame about that Jimmy. It looked like it was real nice, but WHOA! that's a lot of rust.

Yep, hole through the tailgate, holes through the top of the hood, in the dash pic, you can see the dash is rusted away from the cowl...

72chevynut · 06-14-2017, 10:19 PM

I like how you said that on the hooks. Lol, that made it work your time!

57taskforce · 06-15-2017, 09:20 PM

I've never seen a door or a dash rust like that! That's a shame but we all need good parts, and good parts are getting hard to find.

**too much stuff** · 06-17-2017, 08:21 AM

Quote:

Originally Posted by 57taskforce

I've never seen a door or a dash rust like that! That's a shame but we all need good parts, and good parts are getting hard to find.

Even part of the windshield frame is gone inside. It really is not as good as it looks.

06-10-2017, 08:19 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Saved a couple more rustbuckets... c-10, jimmy Its too bad everything you find in MN is basically for parts. Hauled these in this week, no time to part right now, so nothing is for sale. Up first, The c-10... I think the tailgate was pretty nice before it was outside the chicken coop for the last 20+ years. One trailing arm is kind of "Z" shaped... 6 cyl 3speed supposedly run but has trans linkage issues. Not much good on it. 70 model. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-10-2017, 08:21 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Saved a couple more rustbuckets... c-10, jimmy Gate... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-10-2017, 08:27 PM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Saved a couple more rustbuckets... c-10, jimmy The 72 jimmy... Someone added a lot of goodies to this over the years. VERY rusty. (see pics!) Again, supposedly ran when parked. (like all of them) but the drivers door hasn't been opened in years because of rust. Does not have a drivers side hood hinge because there is nowhere to bolt it to! Lots of good parts, but no body panels. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-10-2017, 08:29 PM	#4
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Saved a couple more rustbuckets... c-10, jimmy Couple more... Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

06-10-2017, 09:25 PM	#5
68bowtie Senior Member Join Date: Jan 2007 Location: Turlock, CA Posts: 8,795	Re: Saved a couple more rustbuckets... c-10, jimmy that tailgates beautiful __________________ Please help my sister in law with her battle with cancer https://gofund.me/902f6fce Project "C10 Fever" (68 factory black 396 swb) Project "Little Sister" (70 c10 blue original paint refresh) Project "Blue Bomb" (70 c30 blue original paint refresh) SOLD Project "Vitamin C" (71 c10 orange original paint refresh) SOLD

06-10-2017, 09:26 PM	#6
72 tigger Registered User Join Date: Apr 2008 Location: Berne IN Posts: 3,250	Re: Saved a couple more rustbuckets... c-10, jimmy MN is a lot like Indiana- rusted to oblivion. Glad you can save some of the good stuff

06-10-2017, 09:27 PM	#7
72chevynut Registered User Join Date: Jan 2014 Location: Mt.Sterling, KY Posts: 674	Re: Saved a couple more rustbuckets... c-10, jimmy Cool, it's always fun to drag those rough ones home for spare parts. Especially when they have some rare options on them. When you do decide to part I would be interested in the Jimmy radio antenna if available. __________________ Michael

06-11-2017, 01:11 AM	#8
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Saved a couple more rustbuckets... c-10, jimmy At least the top and lift gate hatch are not rustable. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

06-13-2017, 02:11 PM	#10
cypressbog Go Pack Go! Join Date: Nov 2005 Location: Green Bay Posts: 2,669	Re: Saved a couple more rustbuckets... c-10, jimmy Nice 72 only cruise master!

06-13-2017, 08:48 PM	#12
stsalvage Scrapper 1 Join Date: Jan 2007 Location: Riverside Calif Posts: 1,649	Re: Saved a couple more rustbuckets... c-10, jimmy Some times i yell at people for parting out really nice trucks just to make a profit.You on the other hand i like to shake your hand.If i lived back where you live I be doing the same thing.Been in the scrap and salvage for more then 20 years.I'm not one for parting out a car or truck that still has life to live.Keep up the good work. Try and save them all instead of going to the junker

06-13-2017, 09:34 PM	#14
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,418	Re: Saved a couple more rustbuckets... c-10, jimmy Shame about that Jimmy. It looked like it was real nice, but WHOA! that's a lot of rust. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

06-14-2017, 10:19 PM	#16
72chevynut Registered User Join Date: Jan 2014 Location: Mt.Sterling, KY Posts: 674	Re: Saved a couple more rustbuckets... c-10, jimmy I like how you said that on the hooks. Lol, that made it work your time! __________________ Michael

06-15-2017, 09:20 PM	#17
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: Saved a couple more rustbuckets... c-10, jimmy I've never seen a door or a dash rust like that! That's a shame but we all need good parts, and good parts are getting hard to find. __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.