New Sanderson Big Block headers 4-sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Number98 · 10-23-2003, 08:32 AM

I have a brand new set of Sanderson Big Block headers for sale. They are part #BB3, they are also Ceramic coated. They are the 3/4 length ones that will fit great on our trucks and will not hang below the frame, I picked them for that reason plus I have seen some trucks with them and they work well. They are still wrapped up and in the box, I decided to sell my big block and am going to rebuild the original small block and drop back in it. So these are not gonna work...... I have the recipt where I paid about $450.00 for them, I am asking $300.00

Jason
Seigler Motorsports
770-389-7785

SCOTI · 10-23-2003, 09:30 AM

You have PM.

LeRoy · 10-23-2003, 10:18 AM

Put me in line next

MrShelley · 10-23-2003, 01:06 PM

Consider me next in line

kxmotox247 · 10-23-2003, 01:19 PM

Dang. Put me in line last. I miss all the good deals.

Number98 · 10-29-2003, 09:00 AM

Well guys I still have these available, so far nobody has picked them up.

Jason

kxmotox247 · 10-29-2003, 09:09 AM

I'm very interested in them. I checked the part number BB3 and it comes back as a set of headers for a Chevelle. BB4 is for trucks like ours. Are you sure they will fit a truck with clearance for steering, mounts, etc...?
Has anyone else used these in our trucks? I will take them if someone can say they will work for sure. Can I pay you with Paypal?

SCOTI · 10-29-2003, 12:19 PM

Yes they fit 67-72's using automatics w/o any problems if the engine is on factory towers/mounts. I have a set of un-coated BB-3's currently bolted to my big block in my 67 @ this time. They are close on the pass side frame rail (about an 1/8" gap) but easily clearanced w/a file or a little grinding. 1 7/8" primaries & 3" collectors too.

MrShelley · 10-29-2003, 02:06 PM

PM sent

MrShelley · 10-29-2003, 02:10 PM

SCOTI-

Post some pics!

Number98 · 11-03-2003, 10:56 AM

Nobody has snagged them yet.......... back to the top!

**BOSS** · 11-12-2003, 10:47 PM

do you have any pics of the headers?Are they still for sale?Thanx.You can email pics at cty24737@centurytel.net

MrShelley · 11-12-2003, 11:06 PM

I'm still interested, if you can post some pics so I can see what condition they are in.

Number98 · 11-13-2003, 05:41 PM

If you e-mail me I can send you a good picture. They are brand new and have never been taken out of the box except to have a picture taken.

My e-mail addy is jrs3498@aol.com

Jason

slogo · 11-16-2003, 02:40 PM

PM SENT

Number98 · 11-17-2003, 08:28 PM

Thanks to all that have inquired but I have sold them.....

Jason

MrShelley · 11-17-2003, 08:31 PM

<edit>

10-23-2003, 08:32 AM	#1
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	New Sanderson Big Block headers 4-sale I have a brand new set of Sanderson Big Block headers for sale. They are part #BB3, they are also Ceramic coated. They are the 3/4 length ones that will fit great on our trucks and will not hang below the frame, I picked them for that reason plus I have seen some trucks with them and they work well. They are still wrapped up and in the box, I decided to sell my big block and am going to rebuild the original small block and drop back in it. So these are not gonna work...... I have the recipt where I paid about $450.00 for them, I am asking $300.00 Jason Seigler Motorsports 770-389-7785

10-23-2003, 09:30 AM	#2
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	You have PM. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-23-2003, 10:18 AM	#3
LeRoy Registered truck nut Join Date: Dec 1999 Location: Mt. Vernon, Washington, USA Posts: 1,584	Put me in line next __________________ MOUNT VERNON, WASH. STATE Need a part? Just PM me

10-23-2003, 01:19 PM	#5
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	Dang. Put me in line last. I miss all the good deals. __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

10-29-2003, 09:09 AM	#7
kxmotox247 Senior Member Join Date: Jul 2002 Location: Champaign, IL Posts: 1,397	I'm very interested in them. I checked the part number BB3 and it comes back as a set of headers for a Chevelle. BB4 is for trucks like ours. Are you sure they will fit a truck with clearance for steering, mounts, etc...? Has anyone else used these in our trucks? I will take them if someone can say they will work for sure. Can I pay you with Paypal? __________________ Baby Blue's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=652776 Project 68's Build Thread: http://67-72chevytrucks.com/vboard/s...17#post8442117 www.stonecolumnclassics.com Email: Josh@stonecolumnclassics.com

10-23-2003, 01:06 PM	#4
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	Consider me next in line

10-29-2003, 09:00 AM	#6
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Well guys I still have these available, so far nobody has picked them up. Jason

10-29-2003, 12:19 PM	#8
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,071	Yes they fit 67-72's using automatics w/o any problems if the engine is on factory towers/mounts. I have a set of un-coated BB-3's currently bolted to my big block in my 67 @ this time. They are close on the pass side frame rail (about an 1/8" gap) but easily clearanced w/a file or a little grinding. 1 7/8" primaries & 3" collectors too. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-29-2003, 02:06 PM	#9
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	PM sent

10-29-2003, 02:10 PM	#10
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	SCOTI- Post some pics!

11-03-2003, 10:56 AM	#11
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Nobody has snagged them yet.......... back to the top!

11-12-2003, 10:47 PM	#12
BOSS Just here to help Join Date: Jan 2002 Location: Norwood,Mo Posts: 3,890	do you have any pics of the headers?Are they still for sale?Thanx.You can email pics at cty24737@centurytel.net __________________ Support our site Norwood Survivor

11-12-2003, 11:06 PM	#13
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	I'm still interested, if you can post some pics so I can see what condition they are in.

11-13-2003, 05:41 PM	#14
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	If you e-mail me I can send you a good picture. They are brand new and have never been taken out of the box except to have a picture taken. My e-mail addy is jrs3498@aol.com Jason

11-16-2003, 02:40 PM	#15
slogo Registered User Join Date: Mar 2003 Location: Morristown,TN Posts: 481	PM SENT



Register or Log In To remove these advertisements.

11-17-2003, 08:28 PM	#16
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,552	Thanks to all that have inquired but I have sold them..... Jason

11-17-2003, 08:31 PM	#17
MrShelley Too Many Clubs Club Join Date: Jul 2003 Location: Kilgore, Texas Posts: 443	<edit> Last edited by MrShelley; 11-17-2003 at 08:35 PM.

Register or Log In To remove these advertisements.