Cpp

[Tombstone]

Any of you dealt with Classic Performance? How did your order go, was customer service good?

[Xeen]

Originally Posted by Tombstone

Any of you dealt with Classic Performance? How did your order go, was customer service good?

Their shipping department isn't fast so don't expect to receive your order quickly, it's usually 3 days before they even process your order then another 5 days minimum to get it to you, so don't expect it any sooner than 8 days not including weekends so it could be 10 days, also if something isn't in stock add another week on top of that. Other than that their products are good quality and do what they are supposed to do.
This is the wrong part of the board to ask this question, this section is dedicated to builds, go here next time. http://67-72chevytrucks.com/vboard/forumdisplay.php?f=3

[Twisted71c10]

ordered all my CPP parts thru www.summitracing.com

[keh27]

i would use another company if i had it to do over. if your putting on drop spindle go ahead and buy their ball joints nothing else will work. Thats what i ran into anyways,

[Z10]

FAST FORWARD DELETE. They are terrible, plenty of threads on this forum concerning there poor quality and lack of customer service.

[GR8-68]

I have used many of their parts in my build with no issue on quality. Now, what Xeen said about shipment is very true, give yourself plenty of lead time in fact get it sooner than you need it. And as twisted said you can actually buy their products through summit which would be a whole lot quicker plus free shipping on 100.00 or more orders

[CG]

Ive used them, purchased through one of their resellers with zero problems. From all the threads Ive read over the years that is the best way to go. Don't buy direct.

And just noticed this thread is in the projects/build section, oops.

[Z10]

Originally Posted by GR8-68

I have used many of their parts in my build with no issue on quality. Now, what Xeen said about shipment is very true, give yourself plenty of lead time in fact get it sooner than you need it. And as twisted said you can actually buy their products through summit which would be a whole lot quicker plus free shipping on 100.00 or more orders

My experience: 2 leaking master cylinders, 3 leaking brake boosters, Rewire steering column. Panhard bar would not fit and had to be cut and rewelded. But to be fair......the steering rag joint worked. Now factor in their absolute horrible customer service and shipping the wrong items which have to be returned, and you have a substandard supplier at best. Many better places to buy. My recommendation is to seek out Pro Performance a member of this site.

[Bearhawg]

Leaking Proportioning Valve with less than 200 miles