|
07-06-2017, 09:50 PM
|
#1 |
|
Registered User
 Join Date: Feb 2012
Location: Saint Charles MO.
Posts: 197
|
4x4 lift question
I'm building a 1970 4x4 , planning on 37/13.50/22 Toyos , how much lift is needed ? It looks as if a 6inch would work but not sure with the 13.50's
|
|
|
|
07-06-2017, 10:02 PM
|
#2 |
|
Senior Member
Join Date: Apr 2005
Location: Cheyenne, WY
Posts: 740
|
Re: 4x4 lift question
Because of the shape of wheel wells, you have to go more than on the square bodies. So for 37s, 13.5s, 6 is cutting it close, especially being so wide. 35 x 12.50s work well with 6. Certainly no less than 6". Also long bed vs short bed might make a difference in the rear because of the shape of the wheel wells.
|
|
|
|
|
07-07-2017, 08:03 PM
|
#3 |
|
Registered User
Join Date: Feb 2012
Location: Saint Charles MO.
Posts: 197
|
Re: 4x4 lift question
Ordered a 8 inch lift today
|
|
|
|
|
07-08-2017, 06:50 PM
|
#4 |
|
Born Psycho
Join Date: Feb 2001
Location: brentwood,cal,usa
Posts: 4,936
|
Re: 4x4 lift question
you might be o.k. with an 8" lift depending on rim width and backspacing. my 72 super has an old/tired 4" lift and will clear 35s on an 8" rim but put the same tire on a 10"rim and they hit.
__________________
jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
