WA Tilt columns, $329 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 07-31-2017, 10:52 PM

These are both van tilts that I disassembled, cleaned, moved the neutral safety switch and installed truck grommets.
Both have tight tilt mechanisms.
The bearings were wiped clean and re-lubed.
Turn signal switches have good cams.
These will bolt right in and give you years of service.
You will need to collapse your intermediate shaft approx 1.5 inches and then it's a bolt in.

*randy500* · 07-31-2017, 10:54 PM

Another pic

*randy500* · 07-31-2017, 10:55 PM

The one on the right has the shorter van shift lever

CheyenneSuper72 · 07-31-2017, 11:02 PM

Randy, could you possibly make a better deal if I bought both of them?

*randy500* · 07-31-2017, 11:09 PM

Quote:

Originally Posted by CheyenneSuper72

Randy, could you possibly make a better deal if I bought both of them?

A little better, they will both sell, how about 629 shipped....

CheyenneSuper72 · 07-31-2017, 11:11 PM

I can do that. Please send me your mailing address and I will send out a money order if that is ok.Thanks

*randy500* · 07-31-2017, 11:14 PM

Quote:

Originally Posted by CheyenneSuper72

I can do that. Please send me your mailing address and I will send out a money order if that is ok.Thanks

Sending pm now

*randy500* · 07-31-2017, 11:24 PM

Sold to CheyenneSuper72...

**Jcfcamaro** · 08-01-2017, 01:11 AM

What do you charge to restore one? I have a van tilt that needs all this done.

07-31-2017, 10:52 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Tilt columns, $329 shipped These are both van tilts that I disassembled, cleaned, moved the neutral safety switch and installed truck grommets. Both have tight tilt mechanisms. The bearings were wiped clean and re-lubed. Turn signal switches have good cams. These will bolt right in and give you years of service. You will need to collapse your intermediate shaft approx 1.5 inches and then it's a bolt in. Attached Images

07-31-2017, 10:54 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt columns, $329 shipped Another pic Attached Images

07-31-2017, 10:55 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt columns, $329 shipped The one on the right has the shorter van shift lever Attached Images

07-31-2017, 11:02 PM	#4
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Tilt columns, $329 shipped Randy, could you possibly make a better deal if I bought both of them?

07-31-2017, 11:11 PM	#6
CheyenneSuper72 Registered User Join Date: Jun 2006 Location: Texas Posts: 682	Re: Tilt columns, $329 shipped I can do that. Please send me your mailing address and I will send out a money order if that is ok.Thanks

07-31-2017, 11:24 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Tilt columns, $329 shipped Sold to CheyenneSuper72...

08-01-2017, 01:11 AM	#9
Jcfcamaro Senior Member Join Date: Jul 2015 Location: Fairfax, Missouri Posts: 1,049	Re: Tilt columns, $329 shipped What do you charge to restore one? I have a van tilt that needs all this done.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.