GA 4x4 Exhaust Manifold

[flashed]

WTB Dr side 4x4 exhaust manifold

[Ironhorse]

John, I have a couple but not sure of the part numbers. Looking for anything specific by # or just a center dump small block exhaust manifold? Pretty sure I have at least one that also has the threaded accessory portion which is on the driver side. Will look tomorrow thru the stash and see what is there for sure.

[flashed]

No certain number just one that will work .

[Ironhorse]

John, pic of the three spare center dump exhaust manifolds I have. Two are actually LH with the early style generator mounting I mentioned. One is a RH but with the center dumps they can be used on either side.

The top left is a 2'' #3733976 '57 Vette (True Vette manifold, LOL)
The top right is a 2'' W/AIR tubes for 327-350 '67-'71 Chevelle #3872766
The bottom is 1.9'' with/AIR tubes for '66-'68 Chevelle, Pass Car or Truck California required Air Injection Reactor I believe it was called or just AIR tubes.

All have good solid metal with no cracks, look to have useable studs but I would change them while they are out and in the open. The two uppers would need the mountings ground off for a cleaner looking install if not needing the mount holes. Bottom manifold has had two holes welded closed, two still open. I planned on welding and grinding smooth if I needed to use this one at some point. Been keeping these just as a possibility of need but don't really need all three. I did replace a cracked exhaust manifold about 15 years ago so guess I don't really need three spares, LOL.

Would like $30 each plus shipping if any of these interest you. LMK, if not what your looking for this is best I can do. Nice clean center dumps are getting harder to find around my neck of the woods.

[flashed]

The bottom one looks like what I currently have and I will take that one if you can get me a shipped price . And I will need your address again and hope a money order still works for you .
Thanks
John