This is Rudy Giltner a 1948 Chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mikec4193 · 10-04-2017, 07:46 AM

Hi Chevy folks

Picked up another AD style truck...title calls it a 1948 1 ton...got it from a kid in Giltner Nebraska...his last name was Rudy...hence the name Rudy Giltner...

Found it on a facebook page...bought it sight unseen..it was everything the kid said it was...I have had my share of vintage trucks and the worse thing about owning them is driving them...so I figured I would do something a little different...

So I found a 1984 C10 rolling chassis to put under the 1948 sheetmetal...

Had to assembly this crane so I could pull the cab off...

just before we pulled the cab off it was looking like this...

So the cab is now off the old chassis and sitting on the 1984 one as we speak...waiting for cab mounts from classic trucks...

Oh yeah...I also found a NV3500 5 speed...

Should be a fun built...we want a spare vehicle that we can both drive...hoping this one will fit the bill...

MikeC

**8man** · 10-04-2017, 10:30 AM

Looking forward to watch.

**joedoh** · 10-04-2017, 10:45 AM

good start

dont cut the running boards, or the bed. there are guys out there looking for the 9 ft bed and running boards.

**mongocanfly** · 10-04-2017, 11:26 AM

rudy ...that just sounds like a truck name...looks like a good solid truck...if you havnt already found out that c10 is going to be a little wide for the AD body..

OutlawDrifter · 10-04-2017, 01:13 PM

Another clean NE pickup. Normally the stuff from the Central/Eastern part of the state isn't nearly as clean!

Nice start!

mikec4193 · 10-11-2017, 08:02 PM

Had sometime waiting for parts....got the cab all lined up on the new chassis...

Side view....kinda boring but everything seems to be fitting...

From the behind the door....looks like the wheels will sit inside the fenders...so thats a good thing...

All cobbed up and sitting as I take measurements for cab mounts....

Cab mounts showed up on Monday from Classic Industries...took me until Wednesday to get them mounted up...

All nice in its new spot...

From the bottom side of things...hoping this cab swap will enable me to have a little better ride than the stock 1948 would ride...my last AD style truck rode like a hay wagon with stock cab mounts...this should ride a little better...

Next on the docket...from cab mounts...should be a little more interesting...

MikeC

**Dan in Pasadena** · 10-11-2017, 08:51 PM

Interesting build! I thought the knock on swaps to full size, more modern truck chassis was that they were too wide?

How does the rear axle centerline line up (or not!) with the stock rear axle location?

10-04-2017, 07:46 AM	#1
mikec4193 Registered User Join Date: Nov 2013 Location: Mechanicville NY (upstate) Posts: 191	This is Rudy Giltner a 1948 Chevy Hi Chevy folks Picked up another AD style truck...title calls it a 1948 1 ton...got it from a kid in Giltner Nebraska...his last name was Rudy...hence the name Rudy Giltner... Found it on a facebook page...bought it sight unseen..it was everything the kid said it was...I have had my share of vintage trucks and the worse thing about owning them is driving them...so I figured I would do something a little different... So I found a 1984 C10 rolling chassis to put under the 1948 sheetmetal... Had to assembly this crane so I could pull the cab off... just before we pulled the cab off it was looking like this... So the cab is now off the old chassis and sitting on the 1984 one as we speak...waiting for cab mounts from classic trucks... Oh yeah...I also found a NV3500 5 speed... Should be a fun built...we want a spare vehicle that we can both drive...hoping this one will fit the bill... MikeC __________________ I am the squirrel...

10-04-2017, 10:30 AM	#2
8man Senior Member Join Date: Sep 2017 Location: Bryan, Texas Posts: 2,377	Re: This is Rudy Giltner a 1948 Chevy Looking forward to watch.

10-04-2017, 10:45 AM	#3
joedoh Senior Member Join Date: May 2007 Location: Doodah Kansas Posts: 7,774	Re: This is Rudy Giltner a 1948 Chevy good start dont cut the running boards, or the bed. there are guys out there looking for the 9 ft bed and running boards. __________________ the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393

10-04-2017, 11:26 AM	#4
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: This is Rudy Giltner a 1948 Chevy rudy ...that just sounds like a truck name...looks like a good solid truck...if you havnt already found out that c10 is going to be a little wide for the AD body.. Last edited by mongocanfly; 10-04-2017 at 11:43 AM.

10-04-2017, 01:13 PM	#5
OutlawDrifter Registered User Join Date: Aug 2012 Location: Northeast KS Posts: 1,788	Re: This is Rudy Giltner a 1948 Chevy Another clean NE pickup. Normally the stuff from the Central/Eastern part of the state isn't nearly as clean! Nice start! __________________ 1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop

10-11-2017, 08:02 PM	#6
mikec4193 Registered User Join Date: Nov 2013 Location: Mechanicville NY (upstate) Posts: 191	Re: This is Rudy Giltner a 1948 Chevy Had sometime waiting for parts....got the cab all lined up on the new chassis... Side view....kinda boring but everything seems to be fitting... From the behind the door....looks like the wheels will sit inside the fenders...so thats a good thing... All cobbed up and sitting as I take measurements for cab mounts.... Cab mounts showed up on Monday from Classic Industries...took me until Wednesday to get them mounted up... All nice in its new spot... From the bottom side of things...hoping this cab swap will enable me to have a little better ride than the stock 1948 would ride...my last AD style truck rode like a hay wagon with stock cab mounts...this should ride a little better... Next on the docket...from cab mounts...should be a little more interesting... MikeC __________________ I am the squirrel...

10-11-2017, 08:51 PM	#7
Dan in Pasadena Senior Member Join Date: Nov 2008 Location: Glendora, CA Posts: 6,341	Re: This is Rudy Giltner a 1948 Chevy Interesting build! I thought the knock on swaps to full size, more modern truck chassis was that they were too wide? How does the rear axle centerline line up (or not!) with the stock rear axle location? __________________ '55 Big Window Shortbed, Drive-It-&-Work-On-It slid down the "slippery slope" to a Frame-Off Rodstoration! LQ4/4l85e/C4 IFS/Mustang 8.8 rearend w/3.73's Dan's '55 Big Window "Build" - Well, Kinda!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.