NY WTB 4V Air Cleaner and Spacer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rsavage · 10-08-2017, 04:55 PM

Looking for a correct 4 barrel air cleaner and spacer with hose and end for valve cover grommet in good condition for my '69 Blazer. If you have them, post photos and price including shipping to 14004. Thanks, Rick

Note: Have spacer coming. Need correct for 69 4V air cleaner assembly only now. Please respond with photos and price. Thanks, Rick

**Curtb1971** · 10-08-2017, 07:06 PM

Is this what you are looking for? I believe this came off a 68 gmc. I even have the oem wing nut but I don't have the carb stud. Curt

bhahn70 · 10-08-2017, 07:13 PM

Quote:

Originally Posted by Curtb1971

Is this what you are looking for? I believe this came off a 68 gmc. I even have the oem wing nut but I don't have the carb stud. Curt

Can you tell me how tall the spacer is for reference.
Please and Thanx,Brian

**Curtb1971** · 10-08-2017, 07:52 PM

Quote:

Originally Posted by bhahn70

Can you tell me how tall the spacer is for reference.
Please and Thanx,Brian

Hey Brian! Good to hear from ya and hope the move went easy for you. Gonna get some snow here tomorrow so you don't have to deal with that down there. Looks to be about 2 & 11/16" tall. Hope this helps

Curt

rsavage · 10-08-2017, 08:52 PM

Quote:

Originally Posted by Curtb1971

Is this what you are looking for? I believe this came off a 68 gmc. I even have the oem wing nut but I don't have the carb stud. Curt

Curt, How deeply is the top of the lid pitted? Yes that is what I am looking for just concerned about the pitting. Can you do a close up of the lid? What are you looking to get for the set up? Thanks Rick

bhahn70 · 10-08-2017, 09:34 PM

Quote:

Originally Posted by Curtb1971

Hey Brian! Good to hear from ya and hope the move went easy for you. Gonna get some snow here tomorrow so you don't have to deal with that down there. Looks to be about 2 & 11/16" tall. Hope this helps

Curt

Thanx Curt I was just looking at that today burrr.
Sorry didn't mean to muddy up the thread.
Thanx again

PortHeadlight · 10-09-2017, 07:54 AM

Don't have the air cleaner but do have the spacer. Off a 1970 350 quadrajet. 2 5/8 inch height. Will get it to you for whatever the cheapest USPS priority flat rate box it will fit in. $13.60 or $18.85 total. I'll put in a self addressed envelope and you send me a check or money order after you receive it.

**Curtb1971** · 10-09-2017, 12:34 PM

Quote:

Originally Posted by rsavage

Curt, How deeply is the top of the lid pitted? Yes that is what I am looking for just concerned about the pitting. Can you do a close up of the lid? What are you looking to get for the set up? Thanks Rick

Rick, the lid just has surface rust on it but I'll verify and get some more pictures when I get home this evening. I'm thinking $85 plus shipping for the whole set up. If you pm me your shipping address I can get a usps quote tomorrow. Thanks, Curt

**Curtb1971** · 10-09-2017, 09:11 PM

Alright, I got this out and gave it the ol' once over. The lid looks rougher then it actually is because all the flaky paint. Its a good candidate for restoration (sand blast, primer and paint). I took some 320 grit sand paper to the roughset spot and it cleaned up nice but a bead blast would do this wonders. There is very small specks of pitting (after i sanded) that primer/sealer would fill. I included a close up of the worst rust on the bottom part as well, doesnt look like nothing a little elbow grease wouldn't take care of. Let me know what you think. Thanks, Curt

rsavage · 10-09-2017, 09:44 PM

Quote:

Originally Posted by Curtb1971

Alright, I got this out and gave it the ol' once over. The lid looks rougher then it actually is because all the flaky paint. Its a good candidate for restoration (sand blast, primer and paint). I took some 320 grit sand paper to the roughset spot and it cleaned up nice but a bead blast would do this wonders. There is very small specks of pitting (after i sanded) that primer/sealer would fill. I included a close up of the worst rust on the bottom part as well, doesnt look like nothing a little elbow grease wouldn't take care of. Let me know what you think. Thanks, Curt

Curt,
I think it is a little too rough for my use so I will pass on this one. I appreciate your efforts - just wish the lid was better. Thanks, Rick

Still looking

rsavage · 10-09-2017, 09:45 PM

Quote:

Originally Posted by PortHeadlight

Don't have the air cleaner but do have the spacer. Off a 1970 350 quadrajet. 2 5/8 inch height. Will get it to you for whatever the cheapest USPS priority flat rate box it will fit in. $13.60 or $18.85 total. I'll put in a self addressed envelope and you send me a check or money order after you receive it.

PM sent

**Curtb1971** · 10-09-2017, 09:59 PM

Quote:

Originally Posted by rsavage

Curt,
I think it is a little too rough for my use so I will pass on this one. I appreciate your efforts - just wish the lid was better. Thanks, Rick

Still looking

Rick, no worries. I'm blasting some parts this week so I'll probably throw this in the mix. I'll let you know how it turns out if you haven't found one by then. Thanks, Curt

**Ironhorse** · 10-09-2017, 10:29 PM

Don't have the spacer but looks like you may have that covered anyway via PortHeadlight. Let me look in the parts shed in the morning and see what I have in the way of a air cleaner. Will get back to you.

Well, that was a bust. The one I have if for a Rochester 2BBL carb. Nice shape and complete but not what your looking for. Sorry, can't help.

rsavage · 10-11-2017, 06:30 AM

Thanks much for looking.

TTT

**Joesjunk** · 10-11-2017, 09:10 AM

I have both, I'll get you some pics in a little bit

**randy.powell** · 10-11-2017, 09:21 AM

Portheadlight - if the OP (Rick) doesn't need/want your spacer with the hose and PCV you posted pics of, I'll take it. Again, don't want to step on Ricks toes.
LMK,
Randy

**1rippen6** · 10-11-2017, 09:35 AM

I should have both also if anything falls through.

PortHeadlight · 10-11-2017, 11:05 AM

Quote:

Portheadlight - if the OP (Rick) doesn't need/want your spacer with the hose and PCV you posted pics of, I'll take it. Again, don't want to step on Ricks toes.
LMK,
Randy

Shipped to Rick yesterday...

rsavage · 10-11-2017, 10:15 PM

Quote:

Originally Posted by Joesjunk

I have both, I'll get you some pics in a little bit

OK Joe. Post some photos of the air cleaner (I have the spacer now) when you have a chance and indicate what you want for it. Thanks, Rick

**Joesjunk** · 10-12-2017, 11:04 AM

Quote:

Originally Posted by rsavage

OK Joe. Post some photos of the air cleaner (I have the spacer now) when you have a chance and indicate what you want for it. Thanks, Rick

I looked at my breathers and they will all need cleaned, sanded and painted to look nice. If that's what you are looking for I can get some pics.

rsavage · 10-12-2017, 11:09 AM

Quote:

Originally Posted by Joesjunk

I looked at my breathers and they will all need cleaned, sanded and painted to look nice. If that's what you are looking for I can get some pics.

I will refinish the air cleaner, just want a correct one with no dents and no pitting. Thanks, Rick

rsavage · 10-13-2017, 06:50 AM

Still looking for good non pitted, no dent 4 barrel AC correct for my 69.

**Joesjunk** · 10-13-2017, 10:13 AM

This is the best one I have. No dents. $50.00 plus shipping

**Joesjunk** · 10-13-2017, 10:14 AM

A few more

rsavage · 10-13-2017, 12:11 PM

Quote:

Originally Posted by Joesjunk

A few more

OK. I'll take it. I'll pm you my address so you can pm me back total along with your paypal address. Thanks, Rick

10-08-2017, 04:55 PM	#1
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	WTB 4V Air Cleaner and Spacer Looking for a correct 4 barrel air cleaner and spacer with hose and end for valve cover grommet in good condition for my '69 Blazer. If you have them, post photos and price including shipping to 14004. Thanks, Rick Note: Have spacer coming. Need correct for 69 4V air cleaner assembly only now. Please respond with photos and price. Thanks, Rick __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7 Last edited by rsavage; 10-11-2017 at 06:29 AM.

10-08-2017, 07:06 PM	#2
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: WTB 4V Air Cleaner and Spacer Is this what you are looking for? I believe this came off a 68 gmc. I even have the oem wing nut but I don't have the carb stud. Curt Attached Images

10-09-2017, 07:54 AM	#7
PortHeadlight Registered User Join Date: Nov 2007 Location: Cape Elizabeth, Maine Posts: 196	Re: WTB 4V Air Cleaner and Spacer Don't have the air cleaner but do have the spacer. Off a 1970 350 quadrajet. 2 5/8 inch height. Will get it to you for whatever the cheapest USPS priority flat rate box it will fit in. $13.60 or $18.85 total. I'll put in a self addressed envelope and you send me a check or money order after you receive it. Attached Images

10-09-2017, 09:11 PM	#9
Curtb1971 Senior Member Join Date: Feb 2014 Location: Erie Colorado Posts: 1,022	Re: WTB 4V Air Cleaner and Spacer Alright, I got this out and gave it the ol' once over. The lid looks rougher then it actually is because all the flaky paint. Its a good candidate for restoration (sand blast, primer and paint). I took some 320 grit sand paper to the roughset spot and it cleaned up nice but a bead blast would do this wonders. There is very small specks of pitting (after i sanded) that primer/sealer would fill. I included a close up of the worst rust on the bottom part as well, doesnt look like nothing a little elbow grease wouldn't take care of. Let me know what you think. Thanks, Curt Attached Images

10-09-2017, 10:29 PM	#13
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,294	Re: WTB 4V Air Cleaner and Spacer Don't have the spacer but looks like you may have that covered anyway via PortHeadlight. Let me look in the parts shed in the morning and see what I have in the way of a air cleaner. Will get back to you. Well, that was a bust. The one I have if for a Rochester 2BBL carb. Nice shape and complete but not what your looking for. Sorry, can't help. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 10-10-2017 at 02:15 PM.

10-11-2017, 06:30 AM	#14
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: WTB 4V Air Cleaner and Spacer Thanks much for looking. TTT __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

10-11-2017, 09:10 AM	#15
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: WTB 4V Air Cleaner and Spacer I have both, I'll get you some pics in a little bit __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-11-2017, 09:21 AM	#16
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: WTB 4V Air Cleaner and Spacer Portheadlight - if the OP (Rick) doesn't need/want your spacer with the hose and PCV you posted pics of, I'll take it. Again, don't want to step on Ricks toes. LMK, Randy

10-11-2017, 09:35 AM	#17
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: WTB 4V Air Cleaner and Spacer I should have both also if anything falls through.

10-13-2017, 06:50 AM	#22
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: WTB 4V Air Cleaner and Spacer Still looking for good non pitted, no dent 4 barrel AC correct for my 69. __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

10-13-2017, 10:13 AM	#23
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: WTB 4V Air Cleaner and Spacer This is the best one I have. No dents. $50.00 plus shipping Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale

10-13-2017, 10:14 AM	#24
Joesjunk Senior Member Join Date: May 2001 Location: Independence MO. Posts: 7,709	Re: WTB 4V Air Cleaner and Spacer A few more Attached Images __________________ 72 3/4t Custom Deluxe 402/auto 66k Original paint 71 3/4t 4x4 Custom Deluxe 10k original miles Original paint 71 3/4t Cheyenne 402 70k original paint 72 3/4t 4x4 Custom deluxe 72 3/4t 4x4 Custom deluxe 91k original paint 72 Cheyenne/30 Dually 69 Camaro SS396 4-speed 13 GMC 2500HD Duramax I bought new 05 Jeep Wrangler "Willys Edition" 12k miles (I bought new) 85 3/4 ton 4x4 Scottsdale 33k miles original paint 86 1 ton 4x4 SRW Silverado 454 restored 80 1 ton 4x4 SRW Silverado 9,434 original miles!! original paint 95 GMC 1 ton dually 4x4 my dad bought new 95 GMC 3/4 ton 4x4, regular cab 454, 31k original miles 2002 2500HD 4x4 regular cab 6.0L 67k miles 2002 2500HD 4x4 regular cab 8.1L 28k miles 2003 GMC 2500HD 4x4 regular cab Diesel 93k miles 67-72 Parts for sale



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.