AN8 Limited Time Special

[HotRodfuelhose]

Hi Guys;

We have a new AN8 Sales happening right now.

[HotRodfuelhose]

Guess I could have posted some decent Product shots. Sorry Guys

[bennylava]

Sent you a message on the website, but I was hoping I could talk to you before the sale ends. Need some throttle body fuel lines for 87 tbi 350. They go all the way to the hard lines on the frame rail. How much for a set of these?

[HotRodfuelhose]

Originally Posted by bennylava

Sent you a message on the website, but I was hoping I could talk to you before the sale ends. Need some throttle body fuel lines for 87 tbi 350. They go all the way to the hard lines on the frame rail. How much for a set of these?

Good morning, yes I replied to your email.

From the hardline you will need hardline to AN adapters. For your setup AN8 is overkill for size and you would be better off with an AN6 size.

[HotRodfuelhose]

Hey Guys;

I got a few messages from guys who had "missed out" on this special so we put it back on until Monday October 23rd. Thanks

[THE "10" SILVERADO]

How easy is it to make a complete setup (hard line fitting on fuel sender all the way to carb)? Right now I've got hard lines (rusted) with simple rubber line from sender to line and line to carb at the front. I am considering doing a complete braided setup over replacing the hard lines, but I've never done a custom setup before and don't necessarily know what it entails.

[HotRodfuelhose]

Originally Posted by THE "10" SILVERADO

How easy is it to make a complete setup (hard line fitting on fuel sender all the way to carb)? Right now I've got hard lines (rusted) with simple rubber line from sender to line and line to carb at the front. I am considering doing a complete braided setup over replacing the hard lines, but I've never done a custom setup before and don't necessarily know what it entails.

It's fairly straightforward, I find it easier than bending hard line that's for sure.
The most challenging will be installing the hose end fittings but once you do one it will be no problem. We have installation instructions on our website. http://www.hotrodfuelhose.com

From the sending unit you would use hardline to an6 adapter fittings. Probably 3/8 and 5/16 to AN6.

You would probably want some hose separator clamps available on the site.
As well as some P clamps to mount the hose to the frame. (Available at most hardware stores)

Then your hose bundle and you are good to go.

Let me know if you have any other questions.

[HotRodfuelhose]

This sale ends TODAY.

[HotRodfuelhose]

Hey Guys we have AN8 sale on again 8AN15 to save 15% off on AN8 bundles, hose, and fittings.

https://hotrodfuelhose.com/discount/8AN15

We also now have better hose choices in AN8 bundles and you can choose from 20 Feet, 30 feet, or 40 feet of AN8 hose an 8 AN8 Fittings.

The support on this forum has been awesome.

Thanks
Again.

[HotRodfuelhose]

Originally Posted by HotRodfuelhose

Hey Guys we have AN8 sale on again 8AN15 to save 15% off on AN8 bundles, hose, and fittings.

https://hotrodfuelhose.com/discount/8AN15

We also now have better hose choices in AN8 bundles and you can choose from 20 Feet, 30 feet, or 40 feet of AN8 hose an 8 AN8 Fittings.

The support on this forum has been awesome.

Thanks
Again.

Latest AN8 Sale goes until Nov 15.

[HotRodfuelhose]

Originally Posted by HotRodfuelhose

Latest AN8 Sale goes until Nov 15.

2 more days guys

[HotRodfuelhose]

Originally Posted by HotRodfuelhose

2 more days guys

1 more day