WA 4wd front spring hangars - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*randy500* · 10-23-2017, 07:23 PM

These are clean, not rusty, pitted or greasy, $150 shipped for the fronts.
$100 shipped for the rears.

*randy500* · 10-23-2017, 07:24 PM

Pics of rear hangar mounts.

*randy500* · 10-27-2017, 10:58 AM

ttt

Krex · 10-27-2017, 06:05 PM

maybe interested in the rears do you have pictures

*randy500* · 11-01-2017, 11:59 AM

Quote:

Originally Posted by Krex

maybe interested in the rears do you have pictures

Sorry I missed your request, rear end spring hangars or the rear of the front springs that are pictured above?

Krex · 11-01-2017, 06:04 PM

Quote:

Originally Posted by randy500

Sorry I missed your request, rear end spring hangars or the rear of the front springs that are pictured above?

Realized I wasn't that clear.

Looking for the rear horns for a 4x4 frame after the rear ended spring hangers

*randy500* · 11-01-2017, 06:08 PM

Quote:

Originally Posted by Krex

Realized I wasn't that clear.

Looking for the rear horns for a 4x4 frame after the rear ended spring hangers

So your looking for this piece where I have laid the tape measure?

*randy500* · 11-01-2017, 06:10 PM

I removed the rear spring hangars from that frame.
The other rail has a dent at the end of the top rail, can see it in the picture.
Both sides had a hitch welded to the upper part as seen in the picture too.

Krex · 11-01-2017, 06:16 PM

Quote:

Originally Posted by randy500

So your looking for this piece where I have laid the tape measure?

Yep that's it with the cross member

*randy500* · 11-01-2017, 06:22 PM

How long do you want the frame rails?
I would remove the rear crossmember for packaging, $65 for the frame cuts with the crossmember, shipping I think would be around $30.

Krex · 11-02-2017, 09:06 AM

I think that should work

Krex · 11-02-2017, 09:10 AM

I need them about where that bend is about 3 to 4 inches to the left of measuring tape to the very end

*randy500* · 11-02-2017, 10:39 AM

Quote:

Originally Posted by Krex

I need them about where that bend is about 3 to 4 inches to the left of measuring tape to the very end

Ok, I will cut and ship that today if your ready to pay, send funds to my paypal, there is a link in my signature line that will take you to paypal, please put a note in there of what your paying for.

HARDCORECASH · 11-03-2017, 12:20 AM

Would you be willing to cut the drivers side frame rail behind the front cab mount if I took the fronts?

*randy500* · 11-03-2017, 11:24 AM

Quote:

Originally Posted by HARDCORECASH

Would you be willing to cut the drivers side frame rail behind the front cab mount if I took the fronts?

Sure, you can have the mounts and frame any way you want it.
The frame is already cut behind the front cab mounts and separated from the front crossmember. I will post a pic of it....

*randy500* · 11-03-2017, 11:49 AM

Frame rails

HARDCORECASH · 11-03-2017, 02:20 PM

I will send you a PM randy500.

*randy500* · 11-05-2017, 11:12 AM

Ttt

Krex · 11-05-2017, 09:14 PM

Quote:

Originally Posted by randy500

Ok, I will cut and ship that today if your ready to pay, send funds to my paypal, there is a link in my signature line that will take you to paypal, please put a note in there of what your paying for.

Sorry I missed this I will get payment tomorrow via PayPal

*randy500* · 11-05-2017, 09:31 PM

Quote:

Originally Posted by Krex

Sorry I missed this I will get payment tomorrow via PayPal

Ok, I will look for the payment tomorrow

*randy500* · 02-02-2018, 11:51 AM

Spring mounts still available

**rgreathouse** · 02-02-2018, 12:39 PM

Are the shackle mounts for front leaf springs hangers still available? The second photo you posted.

*randy500* · 02-02-2018, 01:39 PM

Quote:

Originally Posted by rgreathouse

Are the shackle mounts for front leaf springs hangers still available? The second photo you posted.

Yes they are.

**4x41971SWB** · 02-02-2018, 03:25 PM

Not sure but did you sell the rear cross member to Krex.
Or do you have another? If so you can ship with the engine cross member I said I will take on hour other thread.
Thanks Chris

*randy500* · 02-02-2018, 05:46 PM

Quote:

Originally Posted by 4x41971SWB

Not sure but did you sell the rear cross member to Krex.
Or do you have another? If so you can ship with the engine cross member I said I will take on hour other thread.
Thanks Chris

I did sell a crossmember probably to Krex. I have another on but only the upper portion, here is a pic

10-23-2017, 07:23 PM	#1
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	4wd front spring hangars These are clean, not rusty, pitted or greasy, $150 shipped for the fronts. $100 shipped for the rears. Attached Images

10-23-2017, 07:24 PM	#2
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars Pics of rear hangar mounts. Attached Images

10-27-2017, 10:58 AM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars ttt

10-27-2017, 06:05 PM	#4
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 4wd front spring hangars maybe interested in the rears do you have pictures

11-01-2017, 06:10 PM	#8
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars I removed the rear spring hangars from that frame. The other rail has a dent at the end of the top rail, can see it in the picture. Both sides had a hitch welded to the upper part as seen in the picture too.

11-01-2017, 06:22 PM	#10
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars How long do you want the frame rails? I would remove the rear crossmember for packaging, $65 for the frame cuts with the crossmember, shipping I think would be around $30.

11-02-2017, 09:06 AM	#11
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 4wd front spring hangars I think that should work

11-02-2017, 09:10 AM	#12
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: 4wd front spring hangars I need them about where that bend is about 3 to 4 inches to the left of measuring tape to the very end

11-03-2017, 12:20 AM	#14
HARDCORECASH Registered User Join Date: Aug 2014 Location: Williston, ND Posts: 287	Re: 4wd front spring hangars Would you be willing to cut the drivers side frame rail behind the front cab mount if I took the fronts?

11-03-2017, 11:49 AM	#16
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars Frame rails Attached Images

11-03-2017, 02:20 PM	#17
HARDCORECASH Registered User Join Date: Aug 2014 Location: Williston, ND Posts: 287	Re: 4wd front spring hangars I will send you a PM randy500.

11-05-2017, 11:12 AM	#18
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars Ttt

02-02-2018, 11:51 AM	#21
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: 4wd front spring hangars Spring mounts still available

02-02-2018, 12:39 PM	#22
rgreathouse Registered User Join Date: Dec 2004 Location: jackson,ca Posts: 494	Re: 4wd front spring hangars Are the shackle mounts for front leaf springs hangers still available? The second photo you posted. __________________ 1972 c10,2wd,long bed,250,4spd----> 1972 SWB Fleetside 4x4 12v Cummins build thread http://67-72chevytrucks.com/vboard/s...d.php?t=513791

02-02-2018, 03:25 PM	#24
4x41971SWB Senior Member Join Date: May 2016 Location: Escondido CA Posts: 574	Re: 4wd front spring hangars Not sure but did you sell the rear cross member to Krex. Or do you have another? If so you can ship with the engine cross member I said I will take on hour other thread. Thanks Chris



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.