TN Spare parts.. tilt, tach, 4l80/205 etc.. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1968vetL-71 · 10-24-2017, 09:28 AM

Some parts I was gathering for a project that someone wanted before I had a chance to build it. lol. I have 2 of the 4l80/205 setups but keeping one. (sold 3 in last year). No shipping included. May be able to help with delivery or Fastenal shipping? I will start here for board members for a few days then its off to the Facebook groups.
** MIGHT TRADE FOR 60-66 SHEETMETAL **

81-91 Bucket seat brackets (front floor stands welded to floor) 75.00 shipped

73-91 Hydraulic clutch conversion - Hydraulic bellhousing, Pedal assembly and reservoir bracket out of 87' vacuum truck. - 300.00 SOLD

73-76 4 spd tilt colum - rebuilt very hard too find item. bought from board member on here - 325.00

77-80 Tach dash with wiring harness - 275.00 SOLD!!

1 ton K30 16.5-9.75 rims - (2) 100.00

73-87 1/2 ton 4WD hub caps - Nice driver quality - 75.00

73-87 factory truck bucket seat brackets - hard too find parts - 350.00 - SOLD!

77-80 High back buckets - good rebuildable cores - 125.00

Np205 crossmember - 50.00 SOLD

73-80 Blazer bucket seat brackets and tracks COMPLETE - 100.00 very nice set SOLD

73-76 LOW BACK bucket seat backs. Very nice set, 1 crack in one that's easily fixed, - 100.00

91' 4l80/np205 set up - used, EXTREMELY hard too find setup. 1 year only adapter, shifter and VSS NP205 with 4l80 trans, converter, and trans linkage - 1750.00 SOLD

4L80 Underdrive unit - used and worked when removed, comes with controller- 300.00 SOLD

1968vetL-71 · 10-24-2017, 09:36 AM

parts

1968vetL-71 · 10-29-2017, 02:20 PM

Tach is sold.
Bucket seat brackets sold.

Thanks

Also had a few PM's regarding shipping on 4l80/205. I will be glad to put it on a pallet, strapped down and take it to local Fastenal for shipping. Its a lot cheaper that route. Thanks guys.

1968vetL-71 · 11-24-2017, 09:29 AM

Black Friday!! lol lowered a couple prices. ready to move em!

1968vetL-71 · 12-24-2017, 11:40 AM

Holiday bump. lowered a few prices. sold a few and added a couple items.

May possibly trade for some rust free 60-66 sheetmetal!!

Tiger Joe · 12-24-2017, 04:15 PM

Is this the same tilt column you had in the other post? What’s the difference between your tilt and a 79?

**1774btcrew** · 12-25-2017, 12:07 AM

Quote:

Originally Posted by Tiger Joe

Is this the same tilt column you had in the other post? What’s the difference between your tilt and a 79?

I built this column. The 73-76 have a shorter turn signal plug than a 79. They also are splined. 79 is double D. It is easy to install this column with the corresponding intermediate shaft. As far as the plug goes, you could use the correct turn signal switch for your year and not have any problems

blazin71K5 · 12-25-2017, 01:26 AM

What 60-66 sheet metal you looking for, Matt

1968vetL-71 · 12-25-2017, 11:44 AM

1774btcrew - Thanks sir for answering question. When I need ANY square parts I will definitely keep ya as a source. Great guy too deal with!!

Matt,
Could always use a nicer set of fenders, front doors or a 62-66 GMC hood.

Matthew

**1774btcrew** · 12-25-2017, 08:35 PM

Quote:

Originally Posted by 1968vetL-71

1774btcrew - Thanks sir for answering question. When I need ANY square parts I will definitely keep ya as a source. Great guy too deal with!!

Matt,
Could always use a nicer set of fenders, front doors or a 62-66 GMC hood.

Matthew

No problem! Glad I could help. I don't only sell square parts as I have easier stuff but that is definitely what I specialize in

70jimmy · 03-06-2018, 01:56 PM

Do you still have the tilt column

1968vetL-71 · 03-09-2018, 10:18 AM

yes I do. sorry, I was out of town.

also updated some of the sold items. Thanks

70jimmy · 03-19-2018, 06:13 PM

Pm sent

10-24-2017, 09:28 AM	#1
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Spare parts.. tilt, tach, 4l80/205 etc.. Some parts I was gathering for a project that someone wanted before I had a chance to build it. lol. I have 2 of the 4l80/205 setups but keeping one. (sold 3 in last year). No shipping included. May be able to help with delivery or Fastenal shipping? I will start here for board members for a few days then its off to the Facebook groups. MIGHT TRADE FOR 60-66 SHEETMETAL 81-91 Bucket seat brackets (front floor stands welded to floor) 75.00 shipped 73-91 Hydraulic clutch conversion - Hydraulic bellhousing, Pedal assembly and reservoir bracket out of 87' vacuum truck. - 300.00 SOLD 73-76 4 spd tilt colum - rebuilt very hard too find item. bought from board member on here - 325.00 77-80 Tach dash with wiring harness - 275.00 SOLD!! 1 ton K30 16.5-9.75 rims - (2) 100.00 73-87 1/2 ton 4WD hub caps - Nice driver quality - 75.00 73-87 factory truck bucket seat brackets - hard too find parts - 350.00 - SOLD! 77-80 High back buckets - good rebuildable cores - 125.00 Np205 crossmember - 50.00 SOLD 73-80 Blazer bucket seat brackets and tracks COMPLETE - 100.00 very nice set SOLD 73-76 LOW BACK bucket seat backs. Very nice set, 1 crack in one that's easily fixed, - 100.00 91' 4l80/np205 set up - used, EXTREMELY hard too find setup. 1 year only adapter, shifter and VSS NP205 with 4l80 trans, converter, and trans linkage - 1750.00 SOLD 4L80 Underdrive unit - used and worked when removed, comes with controller- 300.00 SOLD Attached Images __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project. Last edited by 1968vetL-71; 03-09-2018 at 10:21 AM. Reason: ITEM SOLD

10-24-2017, 09:36 AM	#2
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. parts Attached Images __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

10-29-2017, 02:20 PM	#3
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Tach is sold. Bucket seat brackets sold. Thanks Also had a few PM's regarding shipping on 4l80/205. I will be glad to put it on a pallet, strapped down and take it to local Fastenal for shipping. Its a lot cheaper that route. Thanks guys. __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

11-24-2017, 09:29 AM	#4
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Black Friday!! lol lowered a couple prices. ready to move em! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-24-2017, 11:40 AM	#5
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Holiday bump. lowered a few prices. sold a few and added a couple items. May possibly trade for some rust free 60-66 sheetmetal!! __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

12-24-2017, 04:15 PM	#6
Tiger Joe Registered User Join Date: Mar 2015 Location: South of Pittsburgh Posts: 428	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Is this the same tilt column you had in the other post? What’s the difference between your tilt and a 79?

12-25-2017, 01:26 AM	#8
blazin71K5 Registered User Join Date: Aug 2009 Location: Cash,TX Posts: 285	Re: Spare parts.. tilt, tach, 4l80/205 etc.. What 60-66 sheet metal you looking for, Matt __________________ 71 2wd k5 67 Nova

12-25-2017, 11:44 AM	#9
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. 1774btcrew - Thanks sir for answering question. When I need ANY square parts I will definitely keep ya as a source. Great guy too deal with!! Matt, Could always use a nicer set of fenders, front doors or a 62-66 GMC hood. Matthew __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

03-06-2018, 01:56 PM	#11
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Do you still have the tilt column __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior

03-09-2018, 10:18 AM	#12
1968vetL-71 Junior Member Join Date: Jun 2004 Location: Murfreesboro, Tn Posts: 1,092	Re: Spare parts.. tilt, tach, 4l80/205 etc.. yes I do. sorry, I was out of town. also updated some of the sold items. Thanks __________________ 1969 impala conv 427 #s loaded. dad bought new 1969 "Judge" RA-3, rare warwick blue/white, #'s 1968 vet convertible #s 427/435 tripower (sold) 1968 belair 2door post #s 427/385 1936 ford 5w coupe dads 1st car 1969 camaro ss (17,xxx) miles Wanted: 69-72 suburban project, 69 camaro convertible. also any big block cars. 69-70 gto judge project.

03-19-2018, 06:13 PM	#13
70jimmy Registered User Join Date: May 2000 Location: Darlington SC Posts: 115	Re: Spare parts.. tilt, tach, 4l80/205 etc.. Pm sent __________________ 1972 CST Blazer 350/350/205 tilt, ac, white with blue highlander plaid interior 1972 CST Jimmy 350/4speed/205 med red with black interior 1972 K20 Custom Deluxe 350/4speed/205 white/ochre/white/ochre 1972 CST Blazer 350/350/205 tach, ac, warn 5687 winch, light yellow with saddle interior 1972 CST Jimmy 350/4speed/205 dark olive with olive interior



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.