CO 250 power steering bracket & pump $130 shipped - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**clay68c10** · 11-05-2017, 10:41 PM

***SOLD***

Selling a ps pump and brackets for a 250

I got this with a 71 1/2 ton frame

The pump turns smooth, the fluid was clean

$70 shipped in lower 48.

I can do PayPal, or whatever works for you.

**clay68c10** · 11-07-2017, 08:05 PM

Bump

I’m open to offers, not sure what it’s really worth.

**georgieb51** · 11-08-2017, 01:11 PM

Quote:

Originally Posted by clay68c10

Bump

I’m open to offers, not sure what it’s really worth.

I plan to add PS to my 67 K10 with its original 6 cylinder engine. Do you know if this will work for me? Does anyone else know? If so I would be interested. And do you think it will fit in a Large Flat-Rate box?
Thanks.

**clay68c10** · 11-08-2017, 07:49 PM

All I can say for sure is that it won’t work on a 292.
I know there’s a couple of 250 differences, but not sure what.
It’s a little too thick for a flat rate box, but I’ve got it packed nicely for ups.

BCOWANWHEELS · 11-08-2017, 09:56 PM

You,ll need a different set of pulleys AND BALANCER

Jason Banks · 11-08-2017, 10:28 PM

This bracket set looks like it is for an integrated head engine. It's the big hole in the middle of the large bracket that gives it away. So...It won't work with your 67 inline.

Jason Banks · 11-08-2017, 10:54 PM

There are pictures of the 'non-integrated head' brackets in this thread - http://67-72chevytrucks.com/vboard/s...d.php?t=408991

**georgieb51** · 11-09-2017, 12:01 AM

Quote:

Originally Posted by Jason Banks

There are pictures of the 'non-integrated head' brackets in this thread - http://67-72chevytrucks.com/vboard/s...d.php?t=408991

I am getting the picture that this setup will not work on my truck but could someone explain what is meant by integrated vs. non-integrated.
Thanks.

**clay68c10** · 11-09-2017, 10:20 AM

It would be worth searching for an image, but i recall the the integrated head has the intake as part of the head casting.

**clay68c10** · 11-11-2017, 11:07 AM

Bump for Saturday

**clay68c10** · 11-15-2017, 03:58 PM

Bump for a price drop.
I can also remove the pump pulley and sell it as bracket and pulley without the pump for $80

**clay68c10** · 11-25-2017, 11:10 AM

ttt

beautimus · 11-26-2017, 06:57 AM

Quote:

Originally Posted by georgieb51

I am getting the picture that this setup will not work on my truck but could someone explain what is meant by integrated vs. non-integrated.
Thanks.

integrated has the intake manifold cast into the cylinder head. (one piece)
the non integrated head has the intake manifold bolted to it. (two piece).
the disadvantage is that you can not upgrade the manifold. also
the non integrated is the correct design for our trucks. the integrated style came later.

**clay68c10** · 01-06-2018, 03:27 PM

Bump

**clay68c10** · 05-06-2018, 04:38 PM

Bump, open to offers. I’d like this out of my garage

ne72gmc · 05-06-2018, 04:48 PM

Would you take $50?

**clay68c10** · 05-06-2018, 05:30 PM

Yep! I will take $50

PM sent

flashed · 05-06-2018, 10:55 PM

Deal of the day and I missed it .

**clay68c10** · 05-06-2018, 11:16 PM

SOLD!!
Thanks

11-05-2017, 10:41 PM	#1
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	250 power steering bracket & pump $70 shipped *SOLD* Selling a ps pump and brackets for a 250 I got this with a 71 1/2 ton frame The pump turns smooth, the fluid was clean $70 shipped in lower 48. I can do PayPal, or whatever works for you. Attached Images __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ Last edited by clay68c10; 05-11-2018 at 08:11 AM. Reason: sold

11-07-2017, 08:05 PM	#2
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Bump I’m open to offers, not sure what it’s really worth. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-08-2017, 07:49 PM	#4
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped All I can say for sure is that it won’t work on a 292. I know there’s a couple of 250 differences, but not sure what. It’s a little too thick for a flat rate box, but I’ve got it packed nicely for ups. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-08-2017, 09:56 PM	#5
BCOWANWHEELS Registered User Join Date: Nov 2006 Location: KINGSPORT,TN. Posts: 3,035	Re: 250 power steering bracket & pump $130 shipped You,ll need a different set of pulleys AND BALANCER __________________ I BELIEVE IN JOHN 3:16

11-08-2017, 10:28 PM	#6
Jason Banks Registered User Join Date: Dec 1999 Location: TX Posts: 1,542	Re: 250 power steering bracket & pump $130 shipped This bracket set looks like it is for an integrated head engine. It's the big hole in the middle of the large bracket that gives it away. So...It won't work with your 67 inline.

11-08-2017, 10:54 PM	#7
Jason Banks Registered User Join Date: Dec 1999 Location: TX Posts: 1,542	Re: 250 power steering bracket & pump $130 shipped There are pictures of the 'non-integrated head' brackets in this thread - http://67-72chevytrucks.com/vboard/s...d.php?t=408991

11-09-2017, 10:20 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped It would be worth searching for an image, but i recall the the integrated head has the intake as part of the head casting. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-11-2017, 11:07 AM	#10
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Bump for Saturday __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-15-2017, 03:58 PM	#11
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Bump for a price drop. I can also remove the pump pulley and sell it as bracket and pulley without the pump for $80 __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

11-25-2017, 11:10 AM	#12
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped ttt __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

01-06-2018, 03:27 PM	#14
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Bump __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-06-2018, 04:38 PM	#15
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Bump, open to offers. I’d like this out of my garage __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-06-2018, 04:48 PM	#16
ne72gmc Registered User Join Date: Jan 2018 Location: Omaha, NE Posts: 89	Re: 250 power steering bracket & pump $130 shipped Would you take $50? __________________ Bruce 70 Chevy C10 SWB Stepside

05-06-2018, 05:30 PM	#17
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped Yep! I will take $50 PM sent __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

05-06-2018, 10:55 PM	#18
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: 250 power steering bracket & pump $130 shipped Deal of the day and I missed it .



Register or Log In To remove these advertisements.

05-06-2018, 11:16 PM	#19
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,932	Re: 250 power steering bracket & pump $130 shipped SOLD!! Thanks __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

Register or Log In To remove these advertisements.