GA WTB: 67-72 K10 engine crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**GAc10boy** · 11-11-2017, 10:01 PM

Just picked up a 67 K10 and am looking for an engine crossmember that goes right under the motor and connects the two frame rails. I don’t think it matters but we’ll be going back with a straight 6 as it came from the factory.

Not too familiar with the k10s but trying to get this one put back together and on the road. Thanks!

Post below if you have one you can part with.

cheyenne shortstep · 11-12-2017, 01:20 AM

I've got one in good condition. $175 shipped. I can get pics in tomorrow if you are interested.

They are the same for 6cyl & V8.

72chevynut · 11-12-2017, 01:59 AM

I’m not 100% sure but I believe there is a difference between the K series V8 and in-line 6 engine cross members. I know the K series V8 and GMC V6 engine cross members are different. Someone here that has a in-line 6 in there 4x4 will know for sure. Are you using a 250 or 292 engine?

**GAc10boy** · 11-12-2017, 08:29 AM

Quote:

Originally Posted by cheyenne shortstep

I've got one in good condition. $175 shipped. I can get pics in tomorrow if you are interested.

They are the same for 6cyl & V8.

Pictures would be great. Please feel free to post here or i can send you my cell for text if that’s easier. Thank you.

Quote:

Originally Posted by 72chevynut

I’m not 100% sure but I believe there is a difference between the K series V8 and in-line 6 engine cross members. I know the K series V8 and GMC V6 engine cross members are different. Someone here that has a in-line 6 in there 4x4 will know for sure. Are you using a 250 or 292 engine?

I’m planning to use a 250. I did some research last night and it looks like the 292 crossmember is definitely different (and hard to find) but that the 6 cylinder engine stands will work great on the v8 crossmember. Wasn’t a whole lot out there so not certain, but honestly I’ll take an engine crossmember that is straight and not twisted and start there.

Any further input appreciated. Thanks!

**uncle** · 11-12-2017, 01:55 PM

I may have one also.

**GAc10boy** · 11-12-2017, 02:05 PM

Quote:

Originally Posted by uncle

I may have one also.

I’m interested in yours, Tim, since that would save on shipping. I’ll text you.

cheyenne shortstep · 11-12-2017, 02:09 PM

Here it is.

**GAc10boy** · 11-12-2017, 02:28 PM

Quote:

Originally Posted by cheyenne shortstep

Here it is.

Looks like a nice one. I’m in on this one if uncle doesn’t come up with one local to me. Is that okay?

cheyenne shortstep · 11-12-2017, 02:29 PM

Yes I totally understand. Just let me know.

**GAc10boy** · 11-12-2017, 09:16 PM

Quote:

Originally Posted by cheyenne shortstep

Yes I totally understand. Just let me know.

Thank you. Will do.

11-11-2017, 10:01 PM	#1
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	WTB: 67-72 K10 engine crossmember Just picked up a 67 K10 and am looking for an engine crossmember that goes right under the motor and connects the two frame rails. I don’t think it matters but we’ll be going back with a straight 6 as it came from the factory. Not too familiar with the k10s but trying to get this one put back together and on the road. Thanks! Post below if you have one you can part with. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

11-12-2017, 01:20 AM	#2
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67-72 K10 engine crossmember I've got one in good condition. $175 shipped. I can get pics in tomorrow if you are interested. They are the same for 6cyl & V8.

11-12-2017, 01:59 AM	#3
72chevynut Registered User Join Date: Jan 2014 Location: Mt.Sterling, KY Posts: 673	Re: WTB: 67-72 K10 engine crossmember I’m not 100% sure but I believe there is a difference between the K series V8 and in-line 6 engine cross members. I know the K series V8 and GMC V6 engine cross members are different. Someone here that has a in-line 6 in there 4x4 will know for sure. Are you using a 250 or 292 engine? __________________ Michael

11-12-2017, 01:55 PM	#5
uncle Senior Member Join Date: Aug 2003 Location: Conyers,Ga. Posts: 7,286	Re: WTB: 67-72 K10 engine crossmember I may have one also.

11-12-2017, 02:09 PM	#7
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67-72 K10 engine crossmember Here it is. Attached Images

11-12-2017, 02:29 PM	#9
cheyenne shortstep Registered User Join Date: Jul 2010 Location: Vista Ca. Posts: 2,405	Re: WTB: 67-72 K10 engine crossmember Yes I totally understand. Just let me know.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.