'68 c10 50th Anniversary Custom Camper - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Voodoo556 · 11-13-2017, 12:30 AM

Made a mad dash up to Southern Oregon yesterday and picked this little rig up.
Has a 307 that runs pretty decent with a NP235 4 speed. Drives good, solid and tight. Other than someone adding a power steering pump and box it look original and unmolested.

Story is the previous owner had bought this truck a few months back from the family of an older gentleman that had passed away. Truck had always been stored under a car port and was one of a few that the family sold. Still has the original radio and floor mat, along with the owners manual. Ivory & White paint with parch cloth trim on the SPID, pose traction rear.
Someone painted the exterior a copper color and black where it should be white (Ivory). Seat dosent look like it is og to exact specs but pretty clean and none the less.

For what I paid I am EXTREMELY happy!
Now what to do with it. Might just get the black gone with white and slap it on my '70 4wd chassis!!

**jocko** · 11-13-2017, 12:42 AM

Nice buy, show us your SPID! Not a lot of 1/2 custom campers floating around out there (but it was definitely an option for a 68 C10).

Voodoo556 · 11-13-2017, 01:05 AM

Quote:

Originally Posted by jocko

Nice buy, show us your SPID! Not a lot of 1/2 custom campers floating around out there (but it was definitely an option for a 68 C10).

**Grumpy old man** · 11-13-2017, 08:03 AM

Looks like a pretty solid truck , I'd put it right back to stock condition and sit back while the value soars over the next few years .

Voodoo556 · 12-18-2017, 12:28 AM

From this

To this

Voodoo556 · 12-18-2017, 12:43 AM

Dwyert4 · 12-18-2017, 01:38 AM

Now that's a noticeable difference. Looks awesome!

**special-K** · 12-18-2017, 07:06 AM

I like, and you didn't even need to change the fender badge. Still applies.

**clay68c10** · 12-18-2017, 09:44 AM

What a beast! I like it.

Greg58 · 12-18-2017, 12:37 PM

Cool.

Greg

burb71 · 12-19-2017, 10:09 PM

lets see under the hood

**jerry moss** · 12-19-2017, 10:43 PM

sweeeeet rig

Voodoo556 · 12-19-2017, 10:47 PM

The 37's are coming off and going to put some 35's on her. Just a little too tall for my liking.
Not sure if I'll have to replace the springs, I think 4 inch springs with 35's would be juuuuuust right!

TBohne · 12-20-2017, 10:52 PM

What are you going to do with those 37s?

Voodoo556 · 12-20-2017, 11:21 PM

Quote:

Originally Posted by TBohne

What are you going to do with those 37s?

Selling them

57taskforce · 12-21-2017, 01:40 AM

That’s big change in short amount of time! Great looking truck!

TBohne · 12-21-2017, 01:34 PM

VooDoo, I may be interested in those when you get ready to sell, let me know on price.

demian5 · 12-21-2017, 02:06 PM

Its a DONK

Voodoo556 · 12-11-2019, 07:55 PM

Finally getting the '68 ready for paint. Its been a loooong wait!!!

Not digging' the '49ers colors.......copper and black no more.
Going to go with the stock 50th Anniversary colors, gold and white.

Changed the 37" Pro Comps for some 35" BFG's and probably going to change the leaf springs to drop the height just a few inches. It sits a little higher than I want.

Replacing front windshield, has the sun discoloration, along with new back glass and all new side, rear cab and tailgate trim from Mar-K.
Not sure if I'm going to need to replace all the tail lights, headlights, etc.
Wanting to replace the eyebrow trim and grille trim pieces.......Evidently Mar-K doesn't make these moldings. Anyone have any advice on where to source these parts?

GerhardH · 12-12-2019, 05:30 PM

One more Anniversary- Congratulation! Happy to see the next steps.

**jocko** · 12-13-2019, 08:02 PM

Photobucket is not awesome.

Voodoo556 · 02-27-2020, 05:39 PM

Finally got her done!

image0 by horsepwr, on Flickr

image1 by horsepwr, on Flickr

image2 by horsepwr, on Flickr

IMG_8084 by horsepwr, on Flickr

Voodoo556 · 02-27-2020, 05:42 PM

IMG_7276 by horsepwr, on Flickr

IMG_2234 by horsepwr, on Flickr

IMG_1411 by horsepwr, on Flickr

IMG_8227 by horsepwr, on Flickr

IMG_4473 by horsepwr, on Flickr

IMG_5253 by horsepwr, on Flickr

Voodoo556 · 02-27-2020, 05:46 PM

I'm not liking the black rims, it's too much black and dosen't go with the gold/white.
Any suggestions?

IMG_5253 by horsepwr, on Flickr

68Gold/white · 02-27-2020, 06:24 PM

Quote:

Originally Posted by Voodoo556

I'm not liking the black rims, it's too much black and dosen't go with the gold/white.
Any suggestions?

IMG_5253 by horsepwr, on Flickr

There's a thread here, somewhere about painting rally wheels colors other than the original argent (silver). Someone posted a picture of a stock rally wheel with the original center caps and trim rings. The wheel was painted gold. Really looked sharp!!!

I will try to find that thread and bring it to the top, for you....

11-13-2017, 12:30 AM	#1
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	'68 c10 50th Anniversary Custom Camper Made a mad dash up to Southern Oregon yesterday and picked this little rig up. Has a 307 that runs pretty decent with a NP235 4 speed. Drives good, solid and tight. Other than someone adding a power steering pump and box it look original and unmolested. Story is the previous owner had bought this truck a few months back from the family of an older gentleman that had passed away. Truck had always been stored under a car port and was one of a few that the family sold. Still has the original radio and floor mat, along with the owners manual. Ivory & White paint with parch cloth trim on the SPID, pose traction rear. Someone painted the exterior a copper color and black where it should be white (Ivory). Seat dosent look like it is og to exact specs but pretty clean and none the less. For what I paid I am EXTREMELY happy! Now what to do with it. Might just get the black gone with white and slap it on my '70 4wd chassis!!

11-13-2017, 12:42 AM	#2
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: '68 c10 50th Anniversary Custom Camper Nice buy, show us your SPID! Not a lot of 1/2 custom campers floating around out there (but it was definitely an option for a 68 C10).

11-13-2017, 08:03 AM	#4
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: '68 c10 50th Anniversary Custom Camper Looks like a pretty solid truck , I'd put it right back to stock condition and sit back while the value soars over the next few years .

12-18-2017, 12:28 AM	#5
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper From this To this

12-18-2017, 12:43 AM	#6
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper

12-18-2017, 01:38 AM	#7
Dwyert4 Registered User Join Date: Apr 2017 Location: Davenport Posts: 79	Re: '68 c10 50th Anniversary Custom Camper Now that's a noticeable difference. Looks awesome!

12-18-2017, 07:06 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: '68 c10 50th Anniversary Custom Camper I like, and you didn't even need to change the fender badge. Still applies. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-18-2017, 09:44 AM	#9
clay68c10 Senior Member Join Date: Aug 2004 Location: Centennial, CO Posts: 2,990	Re: '68 c10 50th Anniversary Custom Camper What a beast! I like it. __________________ ClusterTruck: 68 C10 Bought in 89, wrecked in 03. Slow low $ rebuild started '17. 6.0 & TKO http://67-72chevytrucks.com/vboard/s...d.php?t=788602 93 K1500 Short Step, 350, NV4500, EBL flash ECU. Vortec heads & roller cam someday... 05 Jeep Wrangler Unlimited. 3” lift & 6-speed 02 E320 the insurance total “free car” 13 Tahoe LTZ

12-18-2017, 12:37 PM	#10
Greg58 Registered User Join Date: Jan 2017 Location: Valley, NE. Posts: 1,018	Re: '68 c10 50th Anniversary Custom Camper Cool. Greg __________________ ________________ 1970 GMC Sierra Grande, 2500 133" wb, 402, 4spd. 2007 GMC 3500 SRW 4x4, Crew cab, Duramax/Allison. (Sold} 1987 Chevy Suburban 2500, Silverado, 2wd, 454, t-400 2023 Chevy Silverado LT 3500, crew cab, longbox, 4x4 Z-71 Duramax.

12-19-2017, 10:09 PM	#11
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: '68 c10 50th Anniversary Custom Camper lets see under the hood

12-19-2017, 10:43 PM	#12
jerry moss Born Psycho Join Date: Feb 2001 Location: brentwood,cal,usa Posts: 4,936	Re: '68 c10 50th Anniversary Custom Camper sweeeeet rig __________________ jerry moss 72 cheyenne super K20- tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,tow hooks,bumper guards,toolbox,aux. fuel tank,posi front and rear,plus other goodies!!! SOLD 69 suburban K20-tilt,tach,vacuum,speedwarning,buckets,shoulder belts,am/fm,4 inch all spring lift,4 speed, 14 bolt full floater, dana 44 HD,warn winch,posi front and rear,tow hooks,plus other goodies. 73/80 chevy/gmc K20 SB400,turbo 400,205,tilt,a-c,gas hog. 77 K/5 cheyenne blazer-daily driver/beater. SON HAS IT NOW BRENTWOOD,CALIFORNIA

12-19-2017, 10:47 PM	#13
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper The 37's are coming off and going to put some 35's on her. Just a little too tall for my liking. Not sure if I'll have to replace the springs, I think 4 inch springs with 35's would be juuuuuust right!

12-20-2017, 10:52 PM	#14
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: '68 c10 50th Anniversary Custom Camper What are you going to do with those 37s?

12-21-2017, 01:40 AM	#16
57taskforce All about them K’s Join Date: Jun 2014 Location: Land of Entrapment Posts: 6,487	Re: '68 c10 50th Anniversary Custom Camper That’s big change in short amount of time! Great looking truck! __________________ Tyler '57 3100 http://67-72chevytrucks.com/vboard/s...d.php?t=813888 '72 K20 Cheyenne: 5” lift, 35’s, front dana 60 blah blah blah… http://67-72chevytrucks.com/vboard/s...d.php?t=662879 ‘69 K10 SWB: 4” lift 33”s… in a million pieces http://67-72chevytrucks.com/vboard/s...d.php?t=805206 '98 Silverado LT K2500HD ECLB Vortec 454/4l80E: 6" lift 35x12.5x20’s

12-21-2017, 01:34 PM	#17
TBohne Registered User Join Date: Feb 2016 Location: Anderson, Texas Posts: 295	Re: '68 c10 50th Anniversary Custom Camper VooDoo, I may be interested in those when you get ready to sell, let me know on price.



Register or Log In To remove these advertisements.

12-21-2017, 02:06 PM	#18
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: '68 c10 50th Anniversary Custom Camper Its a DONK __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC

12-11-2019, 07:55 PM	#19
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper Finally getting the '68 ready for paint. Its been a loooong wait!!! Not digging' the '49ers colors.......copper and black no more. Going to go with the stock 50th Anniversary colors, gold and white. Changed the 37" Pro Comps for some 35" BFG's and probably going to change the leaf springs to drop the height just a few inches. It sits a little higher than I want. Replacing front windshield, has the sun discoloration, along with new back glass and all new side, rear cab and tailgate trim from Mar-K. Not sure if I'm going to need to replace all the tail lights, headlights, etc. Wanting to replace the eyebrow trim and grille trim pieces.......Evidently Mar-K doesn't make these moldings. Anyone have any advice on where to source these parts?

12-12-2019, 05:30 PM	#20
GerhardH Registered User Join Date: Aug 2017 Location: South Germany Posts: 527	Re: '68 c10 50th Anniversary Custom Camper One more Anniversary- Congratulation! Happy to see the next steps. __________________ Best regards GerhardH! Members met: 68 short step, 68bowtie, 72c20customcamper, botmfedr1, C/10 King, Chevyland, cornerstore, dmjlambert, fun in dirt, GMan69, Ol Blue K20 1968 CHEVROLET C20 Custom Camper 50th Anniversary, Long bed (LB) 8', 327 V8, Air Condition (AC), Power Steering (PS), Power Brake (PB), Z62 Custom & Comfort Appearance, Turbo Hydramatic TH 400 http://67-72chevytrucks.com/vboard/s...d.php?t=760400

12-13-2019, 08:02 PM	#21
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: '68 c10 50th Anniversary Custom Camper Photobucket is not awesome.

02-27-2020, 05:39 PM	#22
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper Finally got her done! image0 by horsepwr, on Flickr image1 by horsepwr, on Flickr image2 by horsepwr, on Flickr IMG_8084 by horsepwr, on Flickr

02-27-2020, 05:42 PM	#23
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper IMG_7276 by horsepwr, on Flickr IMG_2234 by horsepwr, on Flickr IMG_1411 by horsepwr, on Flickr IMG_8227 by horsepwr, on Flickr IMG_4473 by horsepwr, on Flickr IMG_5253 by horsepwr, on Flickr

02-27-2020, 05:46 PM	#24
Voodoo556 Registered User Join Date: Dec 2015 Location: Central Coast, California Posts: 207	Re: '68 c10 50th Anniversary Custom Camper I'm not liking the black rims, it's too much black and dosen't go with the gold/white. Any suggestions? IMG_5253 by horsepwr, on Flickr

Register or Log In To remove these advertisements.