|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-28-2017, 07:19 PM
|
#1 |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
It can't be this difficult, what am I missing here???
Trying to remove the transmission crossmember. All fasteners are out but it fits tight in the frame rails. Tried beating one side forward, one side aft, no luck. The frame seems to widen a little as you go forward so I knocked it forward as far as I could then tried knocking one side aft, still not happening. What is the secret to getting this out? I don't want to cut it up, even though I have an ECE one ready to go in. Any tips appreciated!
|
|
|
|
11-28-2017, 07:43 PM
|
#2 |
|
Active Member
 Join Date: May 2016
Location: Madison WI
Posts: 146
|
Re: It can't be this difficult, what am I missing here???
I was able to move the right side back and the front side forward
|
|
|
|
|
11-28-2017, 07:47 PM
|
#3 |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: It can't be this difficult, what am I missing here???
That didn't work for me. I beat the p*ss out of it. It got to a point, then wouldn't move any more.
|
|
|
|
|
11-28-2017, 07:56 PM
|
#4 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: It can't be this difficult, what am I missing here???
Try pry it up off the frame and knocking it forward.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
11-28-2017, 08:04 PM
|
#5 |
|
Registered User
Join Date: Oct 2011
Location: Victoria, B.C
Posts: 3,794
|
Re: It can't be this difficult, what am I missing here???
....whatever you do, wear a helmet and googles....lol.
Coley
__________________
....for some men, there is experience, skill and effort....for the others...there is visa and UPS LOL 1966 Chevy 1/2 ton (Florida- Red/white) 1972 Chevy 1/2 ton (California- Blue/white) 2005 Chevy Silverado HD2500/Duramax 2000 Dodge Ram 1500 |
|
|
|
|
11-28-2017, 08:29 PM
|
#6 |
|
Registered User
Join Date: Oct 2016
Location: FWB Fl
Posts: 14
|
Re: It can't be this difficult, what am I missing here???
Get some kind of bottle jack and some 4x4 blocks, turn the jack sideways in between the frame rails and slowly widen the frame until you can turn the crossmember sideways and slide it out. Dont jack too much, dont want to tweek the frame anymore than you have to.
Nic |
|
|
|
|
11-28-2017, 09:03 PM
|
#7 | |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: It can't be this difficult, what am I missing here???
Quote:
That was gonna be my next move! Did you actually do this? |
|
|
|
|
|
11-28-2017, 09:11 PM
|
#8 |
|
Registered User
Join Date: Oct 2017
Location: Saskatoon Saskatchewan
Posts: 74
|
Re: It can't be this difficult, what am I missing here???
I have had to do the jack on the frame before all it took was one pump and was loose
|
|
|
|
|
11-28-2017, 10:16 PM
|
#9 |
|
Registered User
Join Date: Oct 2016
Location: FWB Fl
Posts: 14
|
Re: It can't be this difficult, what am I missing here???
Yup, thats exactly how i did it.
|
|
|
|
|
11-29-2017, 12:38 AM
|
#10 |
|
Registered User
Join Date: May 2012
Location: Faith,NC
Posts: 1,626
|
Re: It can't be this difficult, what am I missing here???
I will give it a try.
|
|
|
|
|
11-29-2017, 12:41 AM
|
#11 | ||||
|
"I ain't nobody, dork."
Join Date: Sep 2007
Location: Whidbey Island, Washington
Posts: 8,978
|
Re: It can't be this difficult, what am I missing here???
Hit it with your purse!
 j/k  I had to beat the living snot out of mine to come out as well. It's even more fun beating it back in!  Gary
__________________
'cuz chicks dig scars... My 1972 GMC 1500 Super Custom (Creeping Death) "long term" build thread. The Rebuild of Creeping Death after the wreck Quote:
Quote:
Quote:
Quote:
|
||||
|
|
|
|
| Bookmarks |
|
|
Linear Mode
