WA WTB Front and Rear crossmember - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nitrosport_5** · 11-29-2017, 08:23 PM

Im looking to see if anyone has the furthest front and furthest rear crossmember. The front one on my newest project has been cruedly welded to the frame and its beginning to look like cutting it apart will probably be the easiest way to remove it. The rear crossmember has been totally broken and destroyed from hooking to it with chains over the years.

This is all for a 68 c10 shortbed, but they look similar to my 72 k20 so im assuming they are interchangeable. Let me know what you have and a price. The straighter the better. Couple extra holes are fine.

**1rippen6** · 11-29-2017, 08:27 PM

I have a front off a 4x4 if interested

*randy500* · 11-29-2017, 10:31 PM

I have both of those, $45ea plus shipping. I can get you pics tomorrow. You can also pick up in Tacoma if that works.

**nitrosport_5** · 12-03-2017, 02:42 PM

Quote:

Originally Posted by randy500

I have both of those, $45ea plus shipping. I can get you pics tomorrow. You can also pick up in Tacoma if that works.

Im an hour south of Spokane, probably cost me more to drive over there than shipping. Can you get me a shipping estimate to Colfax, Wa 99111

*randy500* · 12-03-2017, 03:41 PM

Quote:

Originally Posted by nitrosport_5

Im an hour south of Spokane, probably cost me more to drive over there than shipping. Can you get me a shipping estimate to Colfax, Wa 99111

Shipping is $21, if that works there is a link to my paypal at the bottom of my signature line, put a note in paypal of what your paying for and I can ship those out tomorrow.

**nitrosport_5** · 12-03-2017, 04:02 PM

Quote:

Originally Posted by randy500

Shipping is $21, if that works there is a link to my paypal at the bottom of my signature line, put a note in paypal of what your paying for and I can ship those out tomorrow.

Thats not near as bad as i thought it would be, concider them sold. Thanks!

*randy500* · 12-03-2017, 06:28 PM

Quote:

Originally Posted by nitrosport_5

Thats not near as bad as i thought it would be, concider them sold. Thanks!

I see the funds in paypal, I will get you tracking tomorrow when I ship them. Thank you.

11-29-2017, 08:23 PM	#1
nitrosport_5 Senior Member Join Date: Jul 2012 Location: St. John, Washington Posts: 617	WTB Front and Rear crossmember Im looking to see if anyone has the furthest front and furthest rear crossmember. The front one on my newest project has been cruedly welded to the frame and its beginning to look like cutting it apart will probably be the easiest way to remove it. The rear crossmember has been totally broken and destroyed from hooking to it with chains over the years. This is all for a 68 c10 shortbed, but they look similar to my 72 k20 so im assuming they are interchangeable. Let me know what you have and a price. The straighter the better. Couple extra holes are fine. __________________ "Rusty" 1972 K20 Cheyenne Super, 496, A/C, Tilt, Tach, Buckets, 4l80e/NP205, 4" Rancho Lift, 35" BFG AT "Ramp Truck" 1972 C30 Ramp Truck 350, Air Bags, Factory A/C. "1968" C10 Shortbed project

11-29-2017, 08:27 PM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,718	Re: WTB Front and Rear crossmember I have a front off a 4x4 if interested

11-29-2017, 10:31 PM	#3
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: WTB Front and Rear crossmember I have both of those, $45ea plus shipping. I can get you pics tomorrow. You can also pick up in Tacoma if that works.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.