|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-04-2017, 11:48 PM
|
#1 |
|
Registered User
Join Date: Sep 2012
Location: Idaho
Posts: 652
|
"81 K20: Neutral saftey switch/ Back-up lights switch
'81 K20 silverado tilt column
I need a neutral safety switch. For my '81 I went to auto zone and also looked at rock auto online and they have the wrong switch for my '81 in the book(completely different attachment) Mine has the metal band that attaches to the coloum with two screws But looks like the 1980 switch appears to be the correct one in the picture auto zone has to order it. Mine switch only has four terminals. Two for the starter plug, and two for the back-up light plug The pictures show Seven terminals on a new unit http://www.rockauto.com/en/moreinfo....sn=447&jsn=447 Has anyone replaced their Neutral saftey/ back up light switch on the steering column on a "81 truck and ran into this says for 1980 looks right except only middle 4 terminals needed  says for '81- wrong  Rick
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4, Pinstriping-Lettering-Specialty Painting Last edited by GSP7; 12-05-2017 at 12:06 AM. |
|
|
|
12-05-2017, 05:59 PM
|
#2 |
|
Registered User
Join Date: Sep 2012
Location: Idaho
Posts: 652
|
Re: "81 K20: Neutral saftey switch/ Back-up lights switch
My '81 takes the 1980 Switch and the instructions says dont worry about the extra terminals
later dudes
__________________
'81 K20 Silverado , '99 Dodge Cummins 4x4, '05 Dodge Cummins 4x4, Pinstriping-Lettering-Specialty Painting Last edited by GSP7; 12-06-2017 at 12:28 AM. |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
