MN 72 blazer/jimmy cowl-firewall-dash-windshield frame - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 01-26-2018, 06:30 PM

Just parted this out and decided I am not going to keep this. Looks pretty good from the kick panels up. Not interested in shipping right now, but could drop off between Northern MN and Northern TX in feb if you are close to my route. $650

**too much stuff** · 01-26-2018, 06:33 PM

Screw holes look intact, radio hole looks unaltered.

**too much stuff** · 08-26-2018, 09:04 AM

This is still sitting here...

littleherc · 08-26-2018, 12:02 PM

Interested in the windshield frame.. are you willing to cut and ship it?

72k5ls · 08-28-2018, 06:22 PM

I am interested what part of north texas.

**too much stuff** · 08-28-2018, 07:09 PM

Quote:

Originally Posted by littleherc

Interested in the windshield frame.. are you willing to cut and ship it?

If you want to buy the whole part, I can cut and ship what you want.

Quote:

Originally Posted by 72k5ls

I am interested what part of north texas.

That was actually LAST feb when I had this posted. Not sure if I am going that direction again or not this winter.

Heydanl · 09-03-2018, 03:23 AM

Interested. Please check on how much it would be to ship to 98281?

Jasko59 · 09-04-2018, 05:36 PM

If the whole unit is still available I'd be willing to inspect on site and pick up.

**too much stuff** · 09-04-2018, 08:29 PM

Quote:

Originally Posted by Heydanl

Interested. Please check on how much it would be to ship to 98281?

Quote:

Originally Posted by Jasko59

If the whole unit is still available I'd be willing to inspect on site and pick up.

Noted in line. Seeing if we can work out shipping with the person in front of you. If that falls through I will let you know.

Jasko59 · 09-05-2018, 10:47 AM

Quote:

Originally Posted by too much stuff

Noted in line. Seeing if we can work out shipping with the person in front of you. If that falls through I will let you know.

Understood

**too much stuff** · 09-07-2018, 08:23 AM

Quote:

Originally Posted by Jasko59

If the whole unit is still available I'd be willing to inspect on site and pick up.

Are you still interested? What kind of schedule do you have?

K5 MAX · 09-25-2018, 03:56 PM

I'd be interested in the windshield frame only as well (cut off in the middle of the window) if you're willing. I have a neighbor that's a snow bird that comes down my way every year in November. They live in Pine River, MN. Could probably get him to meet you to pick it up once cut off. Might want the dash pad and engine temp gauge also. Can't pay $650 though, thoughts?

**too much stuff** · 09-25-2018, 06:06 PM

Quote:

Originally Posted by K5 MAX

I'd be interested in the windshield frame only as well (cut off in the middle of the window) if you're willing. I have a neighbor that's a snow bird that comes down my way every year in November. They live in Pine River, MN. Could probably get him to meet you to pick it up once cut off. Might want the dash pad and engine temp gauge also. Can't pay $650 though, thoughts?

Problem is if I cut that off, the rest is pretty much scrap.

K5 MAX · 09-25-2018, 08:08 PM

Quote:

Originally Posted by too much stuff

Problem is if I cut that off, the rest is pretty much scrap.

Ok, I understand. Just didn’t know if you were ready to get rid of some portion of it. Let me know if you change your mind. Thank you sir. Free bump, GLWS

**too much stuff** · 10-25-2018, 04:08 PM

Still available.

*Harlowhead1972* · 10-28-2018, 09:10 PM

Where do you find all this good stuff? too much? too much stuff? Harlow

1slowM6 · 11-09-2018, 11:48 PM

Pm sent

**too much stuff** · 11-13-2018, 06:54 PM

Quote:

Originally Posted by 1slowM6

Pm sent

More pics...

**too much stuff** · 11-13-2018, 06:58 PM

And more. Let me know what else you may need pics of.. There is a little rust at the lower kick panels, but a pretty solid unit for 47 years old.

**too much stuff** · 12-30-2018, 02:54 PM

UPDATE: May be able to haul this between Minnesota, eastern Nebraska or eastern Kansas between 2-2 to 2-4-19

**Mr Banshee** · 12-31-2018, 10:00 PM

Hello, Highly intrested in the cowl assembly. Working on a resto for my 72 Blazer and looking for A-Pillar graph sections. Willing to travel out there if the price is a bit better. PM me if willing. Thx Mike

**too much stuff** · 01-01-2019, 10:54 AM

Quote:

Originally Posted by Mr Banshee

Hello, Highly intrested in the cowl assembly. Working on a resto for my 72 Blazer and looking for A-Pillar graph sections. Willing to travel out there if the price is a bit better. PM me if willing. Thx Mike

PM sent.

**Mr Banshee** · 01-07-2019, 06:36 PM

Attached the pictures that trying to get a better visual on. What I see so in your pictures looks great but looking to get a complete look at it before making a long drive. Appreciate your time. Heres the info that references Top, Middle and Bottom pictures.

Top: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected

Middle: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected.

Bottom: Interested in get a better view of the entire windshield exterior pinch weld under the windshield weather strip .

Thanks Mike

**too much stuff** · 01-09-2019, 07:11 PM

I tried a little bit today, but with all the snow then freezing rain and below 0 wind chills today, I will wait until it warms up a little. I did peel a little weather striping off and took a couple quick pics. Looks solid but there may be a little pitting where it curves.

**Mr Banshee** · 01-09-2019, 07:57 PM

Looks similar to mine in the upward curve behind the door weather strip. Most concerning area is the pinch weld behind the windshield weather strip on the vertical sections of the right and left A pillars. My driver side is so bad that there a pin hole spots on the pillars adjacent to the Windshield. Understand about the weather, thanks for the effort. Definiitly let know if you can get a view behind the weather strip all though you may not be able to in this cold weather or possiblly need to pop the windshield out.

Thanks Mike

01-26-2018, 06:30 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	72 blazer/jimmy cowl-firewall-dash-windshield frame Just parted this out and decided I am not going to keep this. Looks pretty good from the kick panels up. Not interested in shipping right now, but could drop off between Northern MN and Northern TX in feb if you are close to my route. $650 Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-26-2018, 06:33 PM	#2
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Screw holes look intact, radio hole looks unaltered. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-26-2018, 09:04 AM	#3
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame This is still sitting here... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

08-26-2018, 12:02 PM	#4
littleherc Registered User Join Date: Jul 2018 Location: cen cal Posts: 29	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Interested in the windshield frame.. are you willing to cut and ship it?

08-28-2018, 06:22 PM	#5
72k5ls Registered User Join Date: Oct 2015 Location: Conroe,TX Posts: 63	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame I am interested what part of north texas.

09-03-2018, 03:23 AM	#7
Heydanl Registered User Join Date: Jul 2016 Location: Vancouver BC Posts: 47	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Interested. Please check on how much it would be to ship to 98281?

09-04-2018, 05:36 PM	#8
Jasko59 Registered User Join Date: Sep 2015 Location: Doylestown, Pa Posts: 9	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame If the whole unit is still available I'd be willing to inspect on site and pick up.

09-25-2018, 03:56 PM	#12
K5 MAX Registered User Join Date: Jan 2017 Location: Panama City, FL Posts: 120	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame I'd be interested in the windshield frame only as well (cut off in the middle of the window) if you're willing. I have a neighbor that's a snow bird that comes down my way every year in November. They live in Pine River, MN. Could probably get him to meet you to pick it up once cut off. Might want the dash pad and engine temp gauge also. Can't pay $650 though, thoughts? __________________ 1972 K5 Blazer 350/350/PS/PB From GA but live in Panama City, FL

10-25-2018, 04:08 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Still available. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-28-2018, 09:10 PM	#16
Harlowhead1972 Account Suspended Join Date: Feb 2018 Location: Powell, WY Posts: 2,048	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Where do you find all this good stuff? too much? too much stuff? Harlow

11-09-2018, 11:48 PM	#17
1slowM6 Registered User Join Date: Aug 2013 Location: orlando,florida Posts: 35	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Pm sent

11-13-2018, 06:58 PM	#19
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame And more. Let me know what else you may need pics of.. There is a little rust at the lower kick panels, but a pretty solid unit for 47 years old. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2018, 02:54 PM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame UPDATE: May be able to haul this between Minnesota, eastern Nebraska or eastern Kansas between 2-2 to 2-4-19 __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-31-2018, 10:00 PM	#21
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Hello, Highly intrested in the cowl assembly. Working on a resto for my 72 Blazer and looking for A-Pillar graph sections. Willing to travel out there if the price is a bit better. PM me if willing. Thx Mike

01-07-2019, 06:36 PM	#23
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Attached the pictures that trying to get a better visual on. What I see so in your pictures looks great but looking to get a complete look at it before making a long drive. Appreciate your time. Heres the info that references Top, Middle and Bottom pictures. Top: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected Middle: Interested in get a better view of the Left A pillar of what is under the weather strip from the top of window frame down as well face side of where the top hinge mounts down to where the rocker would have intersected. Bottom: Interested in get a better view of the entire windshield exterior pinch weld under the windshield weather strip . Thanks Mike Attached Images



Register or Log In To remove these advertisements.

01-09-2019, 07:11 PM	#24
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,786	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame I tried a little bit today, but with all the snow then freezing rain and below 0 wind chills today, I will wait until it warms up a little. I did peel a little weather striping off and took a couple quick pics. Looks solid but there may be a little pitting where it curves. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-09-2019, 07:57 PM	#25
Mr Banshee Senior Member Join Date: Jan 2013 Location: Warren, Michigan Posts: 223	Re: 72 blazer/jimmy cowl-firewall-dash-windshield frame Looks similar to mine in the upward curve behind the door weather strip. Most concerning area is the pinch weld behind the windshield weather strip on the vertical sections of the right and left A pillars. My driver side is so bad that there a pin hole spots on the pillars adjacent to the Windshield. Understand about the weather, thanks for the effort. Definiitly let know if you can get a view behind the weather strip all though you may not be able to in this cold weather or possiblly need to pop the windshield out. Thanks Mike

Register or Log In To remove these advertisements.