Finally got my new BOZE wheels on! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Faastone27 · 02-03-2018, 04:14 PM

Very Happy woth how these came out. Thank You to Zak at BOZE for helping me out. 20X9 and 22X10.5 with 245/40/20 and 305/35/22 no rubbing at all! Both front a rear suspension have been rebuilt so i am going to see how it sits when it settles in. These pics are literally after i backed out of the shop so it sits a good bit lower now that i drove it around the block.

Mollzyie · 02-03-2018, 04:59 PM

Like them a lot man ... truck is def a head turner !

70 shorty · 02-03-2018, 08:35 PM

I didn't think I was going to like them, reading your description, but after looking at the pics, I do like them!

miller6t9 · 02-03-2018, 08:50 PM

what kind of offset are you running?

69BUCKET · 02-03-2018, 09:04 PM

Also surprised how well that style looks on it....one of the best set ups in my opinion...NICE!!

hewittca · 02-03-2018, 09:41 PM

Quote:

Originally Posted by miller6t9

what kind of offset are you running?

Those look great! I'm curious about backspacing as well, especially on the front. That looks to be a good bit of lip for the fronts. I have 6" BS on my 9" wide fronts and I just barely have enough clearance for turning tucking a little tire.

**BlueBullet** · 02-03-2018, 10:23 PM

Looks Perfect!!

**allchevy58** · 02-04-2018, 12:48 AM

Nice!

beautimus · 02-04-2018, 04:56 AM

i like the way that the outer edge of the tire matches the arch of the fender opening, good job sir. very tastefully done.

Faastone27 · 02-04-2018, 09:17 AM

Thanks for the compliments everyone. The back wheels are 22X10.5 with 5.5 bsand a 305/35/22 tire On the fronts I got a little aggressive running a 20X9 with 4.5 bs with a 245/40/20. On the fronts I will be honest I think I got a bit to aggressive on the fronts and even though they don't rub I think they would look better if I went with a 5.5 bs so I may send them back to have the re-hooped but time will tell. If the front settles like I think it may then I will probably need to .

mixermike · 02-04-2018, 10:59 AM

Very nice!!!

CC69Rat · 02-07-2018, 08:23 PM

Quote:

Originally Posted by Faastone27

Thanks for the compliments everyone. The back wheels are 22X10.5 with 5.5 bsand a 305/35/22 tire On the fronts I got a little aggressive running a 20X9 with 4.5 bs with a 245/40/20. On the fronts I will be honest I think I got a bit to aggressive on the fronts and even though they don't rub I think they would look better if I went with a 5.5 bs so I may send them back to have the re-hooped but time will tell. If the front settles like I think it may then I will probably need to .

CPP modular spindles will narrow the front track width too, just a thought. They pull the front wheels in about .5 " on either side as I understand. It might be easier and cheaper that rehooping your wheels.

02-03-2018, 04:14 PM	#1
Faastone27 Registered User Join Date: Nov 2017 Location: Johns Creek Georgia Posts: 64	Finally got my new BOZE wheels on! Very Happy woth how these came out. Thank You to Zak at BOZE for helping me out. 20X9 and 22X10.5 with 245/40/20 and 305/35/22 no rubbing at all! Both front a rear suspension have been rebuilt so i am going to see how it sits when it settles in. These pics are literally after i backed out of the shop so it sits a good bit lower now that i drove it around the block. Last edited by Faastone27; 02-04-2018 at 12:08 PM.

02-03-2018, 04:59 PM	#2
Mollzyie Registered User Join Date: Aug 2016 Location: Miami fl Posts: 289	Re: Finally got my new BOZE wheels on! Like them a lot man ... truck is def a head turner ! __________________ M.A.G.A.

02-03-2018, 08:35 PM	#3
70 shorty Where's my beer? Join Date: Oct 2004 Location: Glen Allen, VA Posts: 1,768	Re: Finally got my new BOZE wheels on! I didn't think I was going to like them, reading your description, but after looking at the pics, I do like them! __________________ 70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K

02-03-2018, 08:50 PM	#4
miller6t9 Registered User Join Date: Aug 2009 Location: Rockingham, nc Posts: 166	Re: Finally got my new BOZE wheels on! what kind of offset are you running?

02-03-2018, 09:04 PM	#5
69BUCKET Registered User Join Date: Oct 2017 Location: Newton Posts: 216	Re: Finally got my new BOZE wheels on! Also surprised how well that style looks on it....one of the best set ups in my opinion...NICE!!

02-03-2018, 10:23 PM	#7
BlueBullet Senior Member Join Date: Apr 2013 Location: Danvers Minnesota Posts: 967	Re: Finally got my new BOZE wheels on! Looks Perfect!! __________________ 1972 K10 SWB wife's driver 1967 Pontiac GTO Big Bird - 1972 Longhorn K30 http://67-72chevytrucks.com/vboard/s...d.php?t=753294

02-04-2018, 12:48 AM	#8
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,431	Re: Finally got my new BOZE wheels on! Nice! __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1964 C-30 383/4 speed, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

02-04-2018, 04:56 AM	#9
beautimus Registered User Join Date: Mar 2002 Location: woodstock, alabama, usa Posts: 938	Re: Finally got my new BOZE wheels on! i like the way that the outer edge of the tire matches the arch of the fender opening, good job sir. very tastefully done. __________________ i survived cancer and kidney stones, but my kids are killing me.

02-04-2018, 09:17 AM	#10
Faastone27 Registered User Join Date: Nov 2017 Location: Johns Creek Georgia Posts: 64	Re: Finally got my new BOZE wheels on! Thanks for the compliments everyone. The back wheels are 22X10.5 with 5.5 bsand a 305/35/22 tire On the fronts I got a little aggressive running a 20X9 with 4.5 bs with a 245/40/20. On the fronts I will be honest I think I got a bit to aggressive on the fronts and even though they don't rub I think they would look better if I went with a 5.5 bs so I may send them back to have the re-hooped but time will tell. If the front settles like I think it may then I will probably need to .

02-04-2018, 10:59 AM	#11
mixermike Registered User Join Date: Jan 2008 Location: Post Falls, Idaho Posts: 606	Re: Finally got my new BOZE wheels on! Very nice!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.