Can't secure ebrake cable at pedal assembly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rufas · 02-20-2018, 01:13 AM

I'm missing something here. I replace my ebrake cable and attached it to the ebrake assembly in the cab. But there is nothing to secure the cable to. The whole cable just moves went I apply the ebrake.

I have the foot operated ebrake lever in a 1970 GMC. Just what am I missing?

Here is a photo of where the cable attaches to the ebrake assemble. I don't see anywhere to lock the cable to keep it from moving.

LMC shows some type of clip (red arrow - number 13), but where does it attach?

**FirstOwner69** · 02-20-2018, 02:14 AM

This will help.

Rufas · 02-20-2018, 03:11 AM

Quote:

Originally Posted by FirstOwner69

This will help.

Where can I get that clamp? It's been 20 years since down and I've lost that part.

**Ironangel** · 02-20-2018, 04:10 AM

http://shop.willysamerica.com/mobile...ductCode=A8847

02-20-2018, 01:13 AM	#1
Rufas Registered User Join Date: May 2016 Location: Fort Mohave, AZ Posts: 370	Can't secure ebrake cable at pedal assembly I'm missing something here. I replace my ebrake cable and attached it to the ebrake assembly in the cab. But there is nothing to secure the cable to. The whole cable just moves went I apply the ebrake. I have the foot operated ebrake lever in a 1970 GMC. Just what am I missing? Here is a photo of where the cable attaches to the ebrake assemble. I don't see anywhere to lock the cable to keep it from moving. LMC shows some type of clip (red arrow - number 13), but where does it attach? __________________ 1970 GMC 2500 700R Trans, RideTech 4 link rear suspension, air bagged on all four corners, factory upper/lower A-Arms, 2 inch drop spindles. 350 SBC 300hp Weiand Supercharger FiTech 30004 EFI

02-20-2018, 02:14 AM	#2
FirstOwner69 Senior Member Join Date: May 2010 Location: Wisconsin & Arizona Posts: 4,852	Re: Can't secure ebrake cable at pedal assembly This will help. Attached Images

02-20-2018, 04:10 AM	#4
Ironangel Senior Member Join Date: Feb 2010 Location: Falls City, Nebraska "100 Miles From Nowhere" Posts: 2,219	Re: Can't secure ebrake cable at pedal assembly http://shop.willysamerica.com/mobile...ductCode=A8847 __________________ Michael of the clan Hill, "Two Seventy Two's" 71 1-ton Dually 350 4-Speed 71 C/50 Grain Truck, 350 Split-Axle 4-Speed 02 3/4 ton Express 14 Indian Chief Vintage 1952 Ford 8N, "Only Ford Allowed On The Property" "Be American, Buy American"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.