F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Bowties** · 03-15-2018, 04:25 PM

Setup removed from a 506 med blue poly 67 chevy 4 speed manual trans pickup, customer decided to add/purchase a restored tilt column and cushion grip sport wheel so we took these two items in on trade. The 4 spd./floor shift steering column is in great bolt in ready condition and comes with a newer gm delco t/s switch that we installed a couple of years back, also has the correct cancel cam/horn contact. The steering wheel is also in better shape than normally found, it does have some hairline cracks at each spoke but nothing major or any chunks missing, would be an easy one to fully restore and way better than purchasing a repro. Wheel comes with the pictured 67 chrome horn cap and all horn cap mounting hardware. Payment can be sent via USPS moneyorder, paypal or credit card over the phone, if interested let me know a shipping zip and I can get you shipping cost. We also have the radio delete plate out of this same 506 blue poly truck, if anyone's interested I can add pics. Thanks, Mel.

Steering column - $150... ***SOLD***

Steering wheel/horn cap - $175... ***SOLD***
.

**Classic Bowties** · 03-15-2018, 04:29 PM

Wheel pics...

**Classic Bowties** · 03-15-2018, 04:30 PM

Last wheel pics...

**Classic Bowties** · 03-15-2018, 04:47 PM

Decided to offer this optional deluxe 67 CST horn cap to the purchaser of the steering wheel in place of the other pictured 67 chrome cap. This deluxe CST cap has an extra nice plastic center insert which are getting very hard to find in this condition, it also has all of it's plastic mounting prongs present. The outer chrome ring has speckling/pocking in the finish as shown in pics, but can be restored/replated. ***SOLD*** Mel

**Njeiv** · 03-15-2018, 04:49 PM

I’ll take the wheel

**Classic Bowties** · 03-15-2018, 05:22 PM

Quote:

Originally Posted by Njeiv

I’ll take the wheel

Ok, I will need your shipping zip and confirmation of residential or commercial/business address to figure out your shipping charge, also for figuring out a total which horn cap did you want? Thanks, Mel.

**Njeiv** · 03-15-2018, 07:20 PM

Payment sent

**dec010974** · 03-16-2018, 12:28 AM

If the steering column works properly, and it comes with the intermediate shaft, I'll take it. I need both items. Shipping will be to 33176, Miami Florida.

**Classic Bowties** · 03-16-2018, 01:00 AM

Quote:

Originally Posted by dec010974

If the steering column works properly, and it comes with the intermediate shaft, I'll take it. I need both items. Shipping will be to 33176, Miami Florida.

Yes, this column is in as stated bolt in ready condition needing nothing, was only swapped out in favor of an optional tilt column. Please view above pics, this is a 67/68 style steering column without the removable lower intermediate shaft, the separate lower shaft wasn't used until 69. We do have another non-tilt 4 speed/floor shift column from a 72 available, column would be $125. plus $40. for a lower shaft. Let us know, Mel

**dec010974** · 03-16-2018, 08:30 AM

Thanks Mel. I am looking for a bolt in, ready to go, steering column, with the collapse, intermediate shaft. I would like to see a pic if possible. I you can make that happen, send me a complete price with shipping, and PayPal info. Thanks in advance, Clark.

**MikeCofield** · 03-16-2018, 08:59 AM

Is the cst horn button available ?

**Classic Bowties** · 03-16-2018, 11:03 PM

Quote:

Originally Posted by Njeiv

Payment sent

The steering wheel w/67 standard chrome horn cap is under way, parts went out via fedex ground on Fri. 03/16, fedex is projecting that you should see the package next Thu. 03/22 by the end of the day. Thanks again, Mel.

Quote:

Originally Posted by MikeCofield

Is the cst horn button available ?

Hi Mike, njeiv took the wheel with the first pictured standard 67 chrome horn cap, can offer you the pictured 67 CST horn cap for $100. ***SOLD*** + $8. for USPS priority shipping, the cst plastic center insert is in very nice condition.

**MikeCofield** · 03-17-2018, 12:17 AM

Mel I'll pass the cap to the next guy , thanks

**Classic Bowties** · 03-17-2018, 01:04 AM

Quote:

Originally Posted by MikeCofield

Mel I'll pass the cap to the next guy , thanks

Thanks for confirming, The high point on that above pictured CST horn cap is the center plastic insert, a lot of the CST plastic centers found today are foggy & deteriorated, the outer ring can be rechromed and would make it a $200.-$250. horn cap.

Quote:

Originally Posted by dec010974

Thanks Mel. I am looking for a bolt in, ready to go, steering column, with the collapse, intermediate shaft. I would like to see a pic if possible. I you can make that happen, send me a complete price with shipping, and PayPal info. Thanks in advance, Clark.

Hi Clark, I pulled that other 72 steering column out and got some pics, I posted them in the below linked F/S thread and gave you first call.

72 column thread link: http://67-72chevytrucks.com/vboard/s...d.php?t=759467

**Classic Bowties** · 03-20-2018, 05:53 PM

The floor shift steering column is available yet and we just added the 67 blue poly radio delete plate mentioned in first post to the below linked parts board thread. Mel

Delete plate thread: http://67-72chevytrucks.com/vboard/s...=1#post8217651
.
.

**Canuckvetter** · 03-20-2018, 10:55 PM

Quote:

Originally Posted by Classic Bowties

The steering wheel w/67 standard chrome horn cap is under way, parts went out via fedex ground on Fri. 03/16, fedex is projecting that you should see the package next Thu. 03/22 by the end of the day. Thanks again, Mel.

Hi Mike, njeiv took the wheel with the first pictured standard 67 chrome horn cap, can offer you the pictured 67 CST horn cap for $100. + $8. for USPS priority shipping, the cst plastic center insert is in very nice condition.

Mel I would do $80 on the Horn Button picked up.

**tmontg01** · 03-20-2018, 11:17 PM

I'd do the CST horn for asking price if it gets to me

**Classic Bowties** · 03-20-2018, 11:34 PM

Quote:

Originally Posted by Canuckvetter

Mel I would do $80 on the Horn Button picked up.

Hi Michael, appreciate the offer but I have already told Mike C. that I am holding at $100. + ship, if it didn't sell I was kind of thinking that I may try and scrounge up some other small items for chroming to maybe get a batch done. Thanks, Mel

**Classic Bowties** · 03-20-2018, 11:40 PM

Quote:

Originally Posted by tmontg01

I'd do the CST horn for asking price if it gets to me

Let me see what Canuckvetter decides, you will be up next. Thanks, Mel

**Canuckvetter** · 03-21-2018, 12:56 AM

I hoped that with the other stuff I bought and am buying I could get a package deal. I totally understand it's likely worth the $100 and you can pass it on to next in line.

**tmontg01** · 03-21-2018, 01:22 AM

I'll take the CST horn, thanks!

**Classic Bowties** · 03-21-2018, 01:45 AM

Quote:

Originally Posted by tmontg01

I'll take the CST horn, thanks!

You got it, our info for sending payment via paypal has been sent, please confirm your full shipping address and we will get the part ready to go out. Thanks, Mel

flashed · 03-21-2018, 06:54 AM

I will take the steering column if available still ,shipped to Ga 30114 .

**Classic Bowties** · 03-21-2018, 03:50 PM

Quote:

Originally Posted by flashed

I will take the steering column if available still ,shipped to Ga 30114 .

Yes, the column was just brought Bttt yesterday as available yet. The shipping cost to Canton, GA. 30114 came to $46.83 for fedex home delivery 5 day service (56"x7"x7" @ 17 Lbs.) from OR. 97216. Will also combine pack and ship the blue radio delete from the other F/S thread in with this column for this one shipping charge. Will send you our info for making the credit card payment over the phone, if you still have our business card it's also the same phone number on card. Thanks, Mel

flashed · 03-21-2018, 09:15 PM

Thanks Mel ,great doing business with you again .

03-15-2018, 04:25 PM	#1
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,758	F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Setup removed from a 506 med blue poly 67 chevy 4 speed manual trans pickup, customer decided to add/purchase a restored tilt column and cushion grip sport wheel so we took these two items in on trade. The 4 spd./floor shift steering column is in great bolt in ready condition and comes with a newer gm delco t/s switch that we installed a couple of years back, also has the correct cancel cam/horn contact. The steering wheel is also in better shape than normally found, it does have some hairline cracks at each spoke but nothing major or any chunks missing, would be an easy one to fully restore and way better than purchasing a repro. Wheel comes with the pictured 67 chrome horn cap and all horn cap mounting hardware. Payment can be sent via USPS moneyorder, paypal or credit card over the phone, if interested let me know a shipping zip and I can get you shipping cost. We also have the radio delete plate out of this same 506 blue poly truck, if anyone's interested I can add pics. Thanks, Mel. Steering column - $150... *SOLD* Steering wheel/horn cap - $175... *SOLD* . Attached Images Last edited by Classic Bowties; 03-22-2018 at 01:23 AM. Reason: Sold

03-15-2018, 04:29 PM	#2
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,758	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Wheel pics... Attached Images

03-15-2018, 04:30 PM	#3
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,758	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Last wheel pics... Attached Images

03-15-2018, 04:47 PM	#4
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,758	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Decided to offer this optional deluxe 67 CST horn cap to the purchaser of the steering wheel in place of the other pictured 67 chrome cap. This deluxe CST cap has an extra nice plastic center insert which are getting very hard to find in this condition, it also has all of it's plastic mounting prongs present. The outer chrome ring has speckling/pocking in the finish as shown in pics, but can be restored/replated. *SOLD* Mel Attached Images Last edited by Classic Bowties; 03-22-2018 at 01:24 AM.

03-15-2018, 04:49 PM	#5
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly I’ll take the wheel

03-15-2018, 07:20 PM	#7
Njeiv “On The Hunt” Join Date: Feb 2018 Location: Richfield, WI Posts: 521	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Payment sent

03-16-2018, 12:28 AM	#8
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly If the steering column works properly, and it comes with the intermediate shaft, I'll take it. I need both items. Shipping will be to 33176, Miami Florida.

03-16-2018, 08:30 AM	#10
dec010974 Senior Member Join Date: Oct 2012 Location: Miami, Florida Posts: 959	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Thanks Mel. I am looking for a bolt in, ready to go, steering column, with the collapse, intermediate shaft. I would like to see a pic if possible. I you can make that happen, send me a complete price with shipping, and PayPal info. Thanks in advance, Clark.

03-16-2018, 08:59 AM	#11
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,940	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Is the cst horn button available ?

03-17-2018, 12:17 AM	#13
MikeCofield Senior Member Join Date: Dec 2010 Location: Eastaboga AL Posts: 4,940	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Mel I'll pass the cap to the next guy , thanks

03-20-2018, 05:53 PM	#15
Classic Bowties Always on the hunt... Join Date: Sep 2006 Location: Portland, OR. Posts: 5,758	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly The floor shift steering column is available yet and we just added the 67 blue poly radio delete plate mentioned in first post to the below linked parts board thread. Mel Delete plate thread: http://67-72chevytrucks.com/vboard/s...=1#post8217651 . . Last edited by Classic Bowties; 03-21-2018 at 03:21 AM. Reason: added link

03-20-2018, 11:17 PM	#17
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly I'd do the CST horn for asking price if it gets to me

03-21-2018, 12:56 AM	#20
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly I hoped that with the other stuff I bought and am buying I could get a package deal. I totally understand it's likely worth the $100 and you can pass it on to next in line. __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

03-21-2018, 01:22 AM	#21
tmontg01 Senior Member Join Date: May 2015 Location: Sierra Vista, Arizona Posts: 398	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly I'll take the CST horn, thanks! Last edited by tmontg01; 03-21-2018 at 01:29 AM.

03-21-2018, 06:54 AM	#23
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly I will take the steering column if available still ,shipped to Ga 30114 .



Register or Log In To remove these advertisements.

03-21-2018, 09:15 PM	#25
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: F/S 1967 Steerng Wheel & Steering Column in 506 Med blue Poly Thanks Mel ,great doing business with you again .

Register or Log In To remove these advertisements.