Need 1965 C10 seat belt bolt locations - The 1947 - Present Chevrolet & GMC Truck Message Board Network

markbritt · 04-28-2018, 10:43 AM

I am wrapping up my 1965 C10 and need the locations for the seat belts. The sheet metal on the cab I picked up was redone and there is no indication where the bolts go.

Do the inboard belts (I assume the buckles) share a common bolt attachment?

If you could either post a few pictures or email me (markbritt at Hotmail dot com), I would really appreciate it.

I am looking to install and wrap up this weekend.

Mark

**The Rocknrod** · 04-28-2018, 11:33 AM

You probably have them (holes) on the middle of the seat area in the back already. 65's didnt have shoulder belts. This shows the outer areas: http://67-72chevytrucks.com/vboard/s...d.php?t=476066
Here is some info on manufacturers: http://67-72chevytrucks.com/vboard/s...d.php?t=643107
Go to the FAQ section under - Seat Belts - there are many threads: http://67-72chevytrucks.com/vboard/s...d.php?t=646002

'65 chevy lover · 04-30-2018, 11:34 AM

I didn't think these trucks had seatbelts unless you added them. My '66 didn't have them.

**The Rocknrod** · 04-30-2018, 12:38 PM

Seat belts maybe - Holes yes.

rvrfoot · 04-30-2018, 09:33 PM

I have a 66 it has the holes.

Short 3/4 · 04-30-2018, 09:38 PM

For what it's worth;

My 66 c10 had holes and belts
My 65 k10 had no holes or belts
Both were unmolested Fremont trucks purchased from original owners, hope this helps
To answer original question, the inboard belts do not share a bolt, as I recall there was about a 12inch gap between them ( sorry no pictures )

**aerotruk63** · 05-01-2018, 06:01 AM

If the link works below for my literature, look for the 63 Custom Accessories Installation Manual. The measurements are there for the installation.

Killer Bee · 05-01-2018, 06:16 AM

seat belts weren't federally required until 1968.. my 65 has no hint of seat belt mountings.. I did order a belt set for it and back then there was a thread with location dimensions and drawings from a 66 in this board.. if I can find it, I'll repost, but it is in here.. thanks to Doug at SMS, took almost two years to get my seat done so that was all paused and belts aren't in mine yet

good luck!

**The Rocknrod** · 05-01-2018, 10:20 AM

Quote:

Originally Posted by aerotruk63

If the link works below for my literature, look for the 63 Custom Accessories Installation Manual. The measurements are there for the installation.

Wow you have been doing some collecting there - Even seat-belt location dimensions and drawings.

Killer Bee · 05-01-2018, 10:33 AM

this is the thread with pictures and dimensions I found a while back;

DIY 3 Point Seat Belt Installation 1960-66 Cab

good luck!

**The Rocknrod** · 05-01-2018, 12:37 PM

Where he is making his hole for one of the two center holes - I have those holes that I believe are from the factory due to the backing plates shown. Both are 7/16" fine thread.

04-28-2018, 10:43 AM	#1
markbritt Registered User Join Date: Sep 2016 Location: Merrillville, IN Posts: 29	Need 1965 C10 seat belt bolt locations I am wrapping up my 1965 C10 and need the locations for the seat belts. The sheet metal on the cab I picked up was redone and there is no indication where the bolts go. Do the inboard belts (I assume the buckles) share a common bolt attachment? If you could either post a few pictures or email me (markbritt at Hotmail dot com), I would really appreciate it. I am looking to install and wrap up this weekend. Mark

04-28-2018, 11:33 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Need 1965 C10 seat belt bolt locations You probably have them (holes) on the middle of the seat area in the back already. 65's didnt have shoulder belts. This shows the outer areas: http://67-72chevytrucks.com/vboard/s...d.php?t=476066 Here is some info on manufacturers: http://67-72chevytrucks.com/vboard/s...d.php?t=643107 Go to the FAQ section under - Seat Belts - there are many threads: http://67-72chevytrucks.com/vboard/s...d.php?t=646002 __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 04-28-2018 at 11:43 AM.

04-30-2018, 11:34 AM	#3
'65 chevy lover Registered User Join Date: Apr 2011 Location: Ft. Worth, Tx Posts: 536	Re: Need 1965 C10 seat belt bolt locations I didn't think these trucks had seatbelts unless you added them. My '66 didn't have them.

04-30-2018, 12:38 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Need 1965 C10 seat belt bolt locations Seat belts maybe - Holes yes. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

04-30-2018, 09:33 PM	#5
rvrfoot Registered User Join Date: Oct 2016 Location: san bernardino ca Posts: 1,611	Re: Need 1965 C10 seat belt bolt locations I have a 66 it has the holes.

04-30-2018, 09:38 PM	#6
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 560	Re: Need 1965 C10 seat belt bolt locations For what it's worth; My 66 c10 had holes and belts My 65 k10 had no holes or belts Both were unmolested Fremont trucks purchased from original owners, hope this helps To answer original question, the inboard belts do not share a bolt, as I recall there was about a 12inch gap between them ( sorry no pictures ) __________________ 65 short stepside K10 292-SM420-T221 8 lug closed D44 front NoSpin HO72 4.10 rear Last edited by Short 3/4; 04-30-2018 at 09:44 PM. Reason: incompleat answer

05-01-2018, 06:01 AM	#7
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: Need 1965 C10 seat belt bolt locations If the link works below for my literature, look for the 63 Custom Accessories Installation Manual. The measurements are there for the installation. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

05-01-2018, 06:16 AM	#8
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,816	Re: Need 1965 C10 seat belt bolt locations seat belts weren't federally required until 1968.. my 65 has no hint of seat belt mountings.. I did order a belt set for it and back then there was a thread with location dimensions and drawings from a 66 in this board.. if I can find it, I'll repost, but it is in here.. thanks to Doug at SMS, took almost two years to get my seat done so that was all paused and belts aren't in mine yet good luck! __________________ *I started out with nothing - and I still have most of it*

05-01-2018, 10:33 AM	#10
Killer Bee Registered User Join Date: Jan 2016 Location: Barber City, CA Posts: 4,816	Re: Need 1965 C10 seat belt bolt locations this is the thread with pictures and dimensions I found a while back; DIY 3 Point Seat Belt Installation 1960-66 Cab good luck! __________________ *I started out with nothing - and I still have most of it*

05-01-2018, 12:37 PM	#11
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Need 1965 C10 seat belt bolt locations Where he is making his hole for one of the two center holes - I have those holes that I believe are from the factory due to the backing plates shown. Both are 7/16" fine thread. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.