MD Wanted clean OEM sport bumper brackets - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Super** · 05-08-2018, 10:24 AM

Wanted a nice set of original sport bumper brackets. Bolts and hardware would be a plus as well.

Thanks in advance,
Ray

**72 Super** · 05-08-2018, 10:36 PM

Anyone used a set of reproduction brackets lately, if so how were they?

**1968k20** · 05-08-2018, 11:00 PM

Saw some on eBay- will check for you

**1968k20** · 05-08-2018, 11:03 PM

Quote:

Originally Posted by 1968k20

Saw some on eBay- will check for you

They were 73-80

**72 Super** · 05-08-2018, 11:09 PM

Quote:

Originally Posted by 1968k20

They were 73-80

Thanks for checking

Ray

*randy500* · 05-08-2018, 11:39 PM

I bought a couple sets of goodmark and or key parts brackets last year, both were the same. They look right but where the bumper attaches they have high spots at the outer edges top and bottom, I hammerd on them on the vise and ground some radius to them and they are ok, i wouldn’t recommend tightening up the bumper very tight as they will put impressions in the bumper.

**402Bowtie** · 05-08-2018, 11:57 PM

I'm not exactly sure of the application, but I have this NOS bumper bracket...believe it is a LH rear outer bracket...I would want $55 shipped plus paypal fees for it. Unfortunately, I only have the one.

**72 Super** · 05-09-2018, 08:19 AM

Randy500, thanks for the installation details. I see several listings for them, more than likely they all come from the same supplier.

402Bowtie, thanks but I need all four at the moment.

Thanks,
Ray

**1968C30** · 05-09-2018, 07:30 PM

Quote:

Originally Posted by 72 Super

Wanted a nice set of original sport bumper brackets. Bolts and hardware would be a plus as well.

Thanks in advance,
Ray

I have this set.

**72 Super** · 05-09-2018, 08:54 PM

Quote:

Originally Posted by 1968C30

I have this set.

How much would you want shipped to Maryland 20781? Are the bent or rusted through anywhere?

Thank you,
Ray

**1968C30** · 05-09-2018, 08:58 PM

Quote:

Originally Posted by 72 Super

How much would you want shipped to Maryland 20781? Are the bent or rusted through anywhere?

Thank you,
Ray

Not rusted they are very solid. Look like they have undercoating on them and one removed for refinishing don’t look like they would even have pits. I don’t see any bends but I have never had them mounted. PM sent.

**1968C30** · 05-09-2018, 09:27 PM

Addl photos

**72 Super** · 05-09-2018, 09:38 PM

Quote:

Originally Posted by 1968C30

Addl photos

Thanks for information and additional pictures. I’m going to pass.

Thank you,
Ray

05-08-2018, 10:24 AM	#1
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,681	Wanted clean OEM sport bumper brackets Wanted a nice set of original sport bumper brackets. Bolts and hardware would be a plus as well. Thanks in advance, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-08-2018, 10:36 PM	#2
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,681	Re: Wanted clean OEM sport bumper brackets Anyone used a set of reproduction brackets lately, if so how were they? __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-08-2018, 11:00 PM	#3
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Wanted clean OEM sport bumper brackets Saw some on eBay- will check for you __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

05-08-2018, 11:39 PM	#6
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: Wanted clean OEM sport bumper brackets I bought a couple sets of goodmark and or key parts brackets last year, both were the same. They look right but where the bumper attaches they have high spots at the outer edges top and bottom, I hammerd on them on the vise and ground some radius to them and they are ok, i wouldn’t recommend tightening up the bumper very tight as they will put impressions in the bumper.

05-08-2018, 11:57 PM	#7
402Bowtie Registered User Join Date: Sep 2003 Location: Denver, CO Posts: 3,726	Re: Wanted clean OEM sport bumper brackets I'm not exactly sure of the application, but I have this NOS bumper bracket...believe it is a LH rear outer bracket...I would want $55 shipped plus paypal fees for it. Unfortunately, I only have the one. Attached Images

05-09-2018, 08:19 AM	#8
72 Super Senior Member Join Date: Jul 2001 Location: Hyattsville, Maryland Posts: 3,681	Re: Wanted clean OEM sport bumper brackets Randy500, thanks for the installation details. I see several listings for them, more than likely they all come from the same supplier. 402Bowtie, thanks but I need all four at the moment. Thanks, Ray __________________ 72 Cheyenne Super (Purchased new by my parents in August of 71) Black and White

05-09-2018, 09:27 PM	#12
1968C30 Senior Member Join Date: Jan 2012 Location: Mt Nebo WV Posts: 1,335	Re: Wanted clean OEM sport bumper brackets Addl photos Attached Images __________________ https://paypal.me/DMorris6870



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.