AL WTB - K5 floor seat latch trim bezels

[68Timber]

I'm not sure what the correct term is for these pieces, but I'm looking for the bezels that fit around the carpet where the seats latch to the floor. There's one for the front passenger seat and two for the back seat, I need all three. Looking for a nice set. Also need the aluminum sill plates that cover where the top mounts to the bed rails. Thanks.

[48cj2a]

John,

Did you ever find the fiberglass top aluminum cover plates?

I have a pair...

Also can you post a picture of the seat trim for reference?

[68Timber]

I did not, I still need the top trim plates. For the seat latch trim, I still need the trim pieces for the rear. Here's a pic:

[48cj2a]

John,

I found these yesterday when I was digging out a Tailgate Panel for another member here:

I need to go through a few totes to check on the two seat pieces for you which I also happen to have had easy access to but neatly organized and buried again;(

Top piece holes on each end were a little buggered but nothing a washer wouldn't fix.

[68Timber]

Thanks but I'll pass. If you find the latch bezels let me know.

[68Timber]

Coming back to my thread, I realize that didn't sound very nice. I'm putting more money into the interior than I have on anything else on the truck, most everything will be new or refurbed best I can. So while I'm not looking for SEMA quality, I'm trying to find a pair with the least blems possible, that's all. Sorry if I sounded gruff or short.

[48cj2a]

Originally Posted by 68Timber

... I realize that didn't sound very nice...Sorry if I sounded gruff or short.

No worries...

They are both very dusty from sitting up in the garage rafters and the upper is a little rough.

Hopefully I can get the Willys backed out and shift things to get to my totes this weekend.

I also need to get some new batteries and the CUCV running again - I think its been sitting in the same spot for two years now since I was deployed until this time last year

[TKCR]

Ran crossed these on Ebay
https://www.ebay.com/itm/73-87-88-91...cAAOSwgd1azBkA

[68Timber]

Thanks for watching out and sharing the link. Those have been for sale for a while now, that's the same ad I borrowed the picture from and posted above. The price is nice but the rust specs have kept me from buying, so far any way. I'm sure they'd clean up decent with steel wool and wd40 and maybe a little wax. But I'm still hoping to find a nicer pair.

[TKCR]

Originally Posted by 68Timber

Thanks for watching out and sharing the link. Those have been for sale for a while now, that's the same ad I borrowed the picture from and posted above. The price is nice but the rust specs have kept me from buying, so far any way. I'm sure they'd clean up decent with steel wool and wd40 and maybe a little wax. But I'm still hoping to find a nicer pair.

Ahh, I see that now, that they are the same pic. I'll continue to keep an eye out

[pid]

You might be able to save the eBay bezels. Tinfoil and dish soap can do wonders polishing up chrome and taking off surface rust. This was the before and after on my bezels.

[t korinek]

I just pulled some nice ones out of a suburban if your still looking

[68Timber]

I am. Can you post some pics?

[1774btcrew]

John, I had no idea you were still looking for the top plates. I got so buried in everything I was doing and they weren't where I thought they were when I initially contacted you. I came across them the other day. Let me know. I am really sorry about that. Have had some personal stuff going on

[68Timber]

Originally Posted by 1774btcrew

John, I had no idea you were still looking for the top plates. I got so buried in everything I was doing and they weren't where I thought they were when I initially contacted you. I came across them the other day. Let me know. I am really sorry about that. Have had some personal stuff going on

Jeff, no worries, and I do still need those. PM sent.

[TKCR]

Originally Posted by 68Timber

Jeff, no worries, and I do still need those. PM sent.

Do you still need some of these?