KS Bed Floor Patches-Lrg - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 05-27-2018, 04:44 PM

Have two good, solid larger bed floor patches. Both floor patches are cut from middle of floor between wheel well humps. Flaky paint on both but solid.
One measures just under 18'' by 50'' with the start of rear wheel well curvature. The other patch measures about 20'' by 50'', has small 1/4'' hole drilled thru it for what ever reason? Your choice of either floor patch for $45 plus shipping. Both are straight with NO dents or dips. Shipping will be thru UPS, am required to wrap in cardboard. UPS will no longer accept bare edge material. Money order, do not have Paypal.

I do have a larger piece, 31'' by 72'' with support ribs attached but the size and weight just almost prohibits shipping. This piece from front of bed panel to start of wheel well area. Last couple inches has some small perforations, also straight with no dents or dips. Could do local pickup or deliver in Wichita, Ks. area for $60 plus gas $.

**Ironhorse** · 05-27-2018, 04:46 PM

Larger 31'' x 72'' section. $60 local pick up or delivery only. This section does have some rot in one support member.

**Ironhorse** · 05-29-2018, 05:05 PM

Ba-bump

**Ironhorse** · 05-31-2018, 03:37 PM

ttt

**Dieselwrencher** · 05-31-2018, 05:44 PM

I'm interested in one or both smaller floor patches. Can you get me a quote to 50228 please? Also, if I purchased the large one, how long do I have to come get it? Thanks Ryan.

**Ironhorse** · 05-31-2018, 07:14 PM

Ryan, give me a couple days to get a shipping quote to you. Will have to use UPS and wrap somewhat with cardboard to get decent quote. Will do one single quote and a quote also for both small pieces to 50228 Prairie City, Ia. If interested in all three pieces would do $135 picked up if paid in advance. I have two acres with several out buildings so storage until picked up is not a problem. If passing thru Kansas on the way some where could also meet up possibly making it a bit easier if pulling a trailer? I am about 30 miles south of Wichita and 3 miles west of I-35. Thanks for the interest, will get back with you soonest.

**Ironhorse** · 07-03-2018, 06:09 PM

Bringing back to the top. Good original GM bed floor patching material. Can ship the two smaller pieces, larger piece local pick up only.

**Ironhorse** · 07-09-2018, 12:59 PM

Still have these, good solid 67-72 bed floor patches.

**Ironhorse** · 08-20-2018, 08:38 AM

Bed floor patches for rust repair.

tallbob · 08-23-2018, 09:25 PM

I need a floor section at rear by tailgate. Drivers side corner. This is the end section where the corrugations taper. About 6" long and 18" wide would do it. Let me know if you can help. Thanks much

**Ironhorse** · 08-23-2018, 09:44 PM

Sorry can't help you with that. What I have in the pics is the only floor sections I have. Keep watching the board, those bed floor pieces or sections do come up now and then, just not really often.

05-27-2018, 04:44 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Bed Floor Patches-Lrg Have two good, solid larger bed floor patches. Both floor patches are cut from middle of floor between wheel well humps. Flaky paint on both but solid. One measures just under 18'' by 50'' with the start of rear wheel well curvature. The other patch measures about 20'' by 50'', has small 1/4'' hole drilled thru it for what ever reason? Your choice of either floor patch for $45 plus shipping. Both are straight with NO dents or dips. Shipping will be thru UPS, am required to wrap in cardboard. UPS will no longer accept bare edge material. Money order, do not have Paypal. I do have a larger piece, 31'' by 72'' with support ribs attached but the size and weight just almost prohibits shipping. This piece from front of bed panel to start of wheel well area. Last couple inches has some small perforations, also straight with no dents or dips. Could do local pickup or deliver in Wichita, Ks. area for $60 plus gas $. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-27-2018, 04:46 PM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Larger 31'' x 72'' section. $60 local pick up or delivery only. This section does have some rot in one support member. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-29-2018, 05:05 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Ba-bump __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-31-2018, 03:37 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg ttt __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-31-2018, 05:44 PM	#5
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: Bed Floor Patches-Lrg I'm interested in one or both smaller floor patches. Can you get me a quote to 50228 please? Also, if I purchased the large one, how long do I have to come get it? Thanks Ryan. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-31-2018, 07:14 PM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Ryan, give me a couple days to get a shipping quote to you. Will have to use UPS and wrap somewhat with cardboard to get decent quote. Will do one single quote and a quote also for both small pieces to 50228 Prairie City, Ia. If interested in all three pieces would do $135 picked up if paid in advance. I have two acres with several out buildings so storage until picked up is not a problem. If passing thru Kansas on the way some where could also meet up possibly making it a bit easier if pulling a trailer? I am about 30 miles south of Wichita and 3 miles west of I-35. Thanks for the interest, will get back with you soonest. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks Last edited by Ironhorse; 05-31-2018 at 07:33 PM. Reason: Can't spell, LOL.

07-03-2018, 06:09 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Bringing back to the top. Good original GM bed floor patching material. Can ship the two smaller pieces, larger piece local pick up only. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-09-2018, 12:59 PM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Still have these, good solid 67-72 bed floor patches. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-20-2018, 08:38 AM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Bed floor patches for rust repair. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

08-23-2018, 09:25 PM	#10
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Bed Floor Patches-Lrg I need a floor section at rear by tailgate. Drivers side corner. This is the end section where the corrugations taper. About 6" long and 18" wide would do it. Let me know if you can help. Thanks much

08-23-2018, 09:44 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,141	Re: Bed Floor Patches-Lrg Sorry can't help you with that. What I have in the pics is the only floor sections I have. Keep watching the board, those bed floor pieces or sections do come up now and then, just not really often. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.