NY wtb exhaust manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**gmc 2500 4x4** · 06-03-2018, 07:38 AM

looking for a good set of exhaust manifolds for an '89 chevy k1500 w/305, 02 sensor on driver side, no air tube but can plug it. hell i'll take the xover pipe if ya have it

Knight72 · 06-08-2018, 09:07 AM

I've got a set laying in the garage off an 88 c1500 350. I checked them out yesterday and didn't see any cracks. Let me know and I'll send pics.

**gmc 2500 4x4** · 06-08-2018, 09:20 AM

good morning, do they look like the pics? and stud condition, you can post here. after market are like 45-50 ea with studs but im always worried about fitment. thanx, paul

Knight72 · 06-08-2018, 09:27 AM

I'll post up some pictures when I get to the house.

**gmc 2500 4x4** · 06-23-2018, 05:10 AM

ttt

**Mr_Rich** · 06-24-2018, 02:24 AM

I still have a set that are like new on the shelf. I've used Borla headers on my truck for the last twenty-five years. I can take pics of mine later tomorrow if you're interested. I sold the Y-pipe a couple of months ago.

**gmc 2500 4x4** · 06-24-2018, 05:55 AM

yes interested , 88-94 i think are same but let me see what ya have, thanx!

**gmc 2500 4x4** · 06-30-2018, 11:13 AM

ttt

**Mr_Rich** · 07-02-2018, 01:53 PM

I think these are what you need. These are 305 originals. They came off my truck in '93 and have been on the shelf since. I now have Borlas on my 350 and so no need for them. One thing that may be an issue. Cast iron "shrinks" and you might need a spreader between the mounting points to start the bolts. They actually have a tool for this and you should be able to verify this with Chevy Tech. I might also have a good set of bolts for these. I may be able to dig them up.

**Mr_Rich** · 07-02-2018, 01:57 PM

I also have a set of manifolds that came off my '73 307 squarebody that have AIR tubes. I have another set of manifolds that came off a '90 Impala/ Cadillac that have AIR tubes but are much different design-wise. Those manifolds have more of an upswept design.

**Mr_Rich** · 07-02-2018, 11:44 PM

Where did you go?

**gmc 2500 4x4** · 07-03-2018, 06:19 AM

i tried replying with my phone but didnt work? i messaged you and my zip is 14775 , ripley ny. these look nice

**Mr_Rich** · 07-04-2018, 02:42 AM

PM sent.

**Mr_Rich** · 07-16-2018, 03:50 PM

Check your pm.

06-03-2018, 07:38 AM	#1
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	wtb exhaust manifolds looking for a good set of exhaust manifolds for an '89 chevy k1500 w/305, 02 sensor on driver side, no air tube but can plug it. hell i'll take the xover pipe if ya have it Attached Images

06-08-2018, 09:07 AM	#2
Knight72 Registered User Join Date: Aug 2016 Location: Southside, Alabama Posts: 173	Re: wtb exhaust manifolds I've got a set laying in the garage off an 88 c1500 350. I checked them out yesterday and didn't see any cracks. Let me know and I'll send pics. __________________ 72 C10 lwb fleetside aka Big Rhonda. Still plugging away. Build thread: http://67-72chevytrucks.com/vboard/s...42#post8247142

06-08-2018, 09:20 AM	#3
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: wtb exhaust manifolds good morning, do they look like the pics? and stud condition, you can post here. after market are like 45-50 ea with studs but im always worried about fitment. thanx, paul

06-08-2018, 09:27 AM	#4
Knight72 Registered User Join Date: Aug 2016 Location: Southside, Alabama Posts: 173	Re: wtb exhaust manifolds I'll post up some pictures when I get to the house. __________________ 72 C10 lwb fleetside aka Big Rhonda. Still plugging away. Build thread: http://67-72chevytrucks.com/vboard/s...42#post8247142

06-23-2018, 05:10 AM	#5
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: wtb exhaust manifolds ttt

06-24-2018, 02:24 AM	#6
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds I still have a set that are like new on the shelf. I've used Borla headers on my truck for the last twenty-five years. I can take pics of mine later tomorrow if you're interested. I sold the Y-pipe a couple of months ago. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

06-24-2018, 05:55 AM	#7
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: wtb exhaust manifolds yes interested , 88-94 i think are same but let me see what ya have, thanx!

06-30-2018, 11:13 AM	#8
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: wtb exhaust manifolds ttt

07-02-2018, 01:53 PM	#9
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds I think these are what you need. These are 305 originals. They came off my truck in '93 and have been on the shelf since. I now have Borlas on my 350 and so no need for them. One thing that may be an issue. Cast iron "shrinks" and you might need a spreader between the mounting points to start the bolts. They actually have a tool for this and you should be able to verify this with Chevy Tech. I might also have a good set of bolts for these. I may be able to dig them up. Attached Images __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

07-02-2018, 01:57 PM	#10
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds I also have a set of manifolds that came off my '73 307 squarebody that have AIR tubes. I have another set of manifolds that came off a '90 Impala/ Cadillac that have AIR tubes but are much different design-wise. Those manifolds have more of an upswept design. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

07-02-2018, 11:44 PM	#11
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds Where did you go? __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

07-03-2018, 06:19 AM	#12
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: wtb exhaust manifolds i tried replying with my phone but didnt work? i messaged you and my zip is 14775 , ripley ny. these look nice

07-04-2018, 02:42 AM	#13
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds PM sent. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C

07-16-2018, 03:50 PM	#14
Mr_Rich Registered User Join Date: May 2006 Location: Yucaipa, Calif. Posts: 790	Re: wtb exhaust manifolds Check your pm. __________________ 1989 K1500 Chev. EC Original owner; some of the aftermarket parts I've installed are Borla headers, Hypertech chip, Edelbrock water pump, and a Stillen rear disc brake conversion kit. 2009 Hummer H3T 3.7L 5M (sold) 1997 K2500 Chev. EC 7.4L/ 4L80E 2018 Dodge Ram 2500 HD R/C



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.