MD LH 69-72 Fender

[special-K]

Rust free 69-72 Chevy fender. It had a nice dark blue metallic paint job, but I stripped it to show it's true condition. No engine badge holes, small dents on cup, lower trim holes filled with bondo, and some light bondo on flat area of wheel arch to smooth it out. Minor dings, the concave area/edges are unaffected. Good OEM sheet metal here.... $125 plus shipping/postal money order SOLD!

[special-K]

I could strip to bare for more money. My purpose was to show condition, not prep for paint.

[atog]

Good price on solid oem fender. They are getting harder to find these days. What type of bondo was used to fill holes for moldings?

[special-K]

I don't know but it held up. It's kinda yeller

[special-K]

I have a couple other LH 69-72 fenders to sell that I haven't stripped. Both have upper and lower trim. If interested I can put up pictures and price.

I also have this '68 Chevy/thru-'72 GMC fender that needs work for $50. Not pretty, but an OEM part worth fixing. I have that area from another fender to offer with it for $20

[special-K]

I have other driver side fenders, '67, '68 Chevy/GMC-'72, and 69-72 Chevy. Prices vary. If interested I will show pictures with price.

[BCOWANWHEELS]

I need a 72 p/s fender

[special-K]

They always said the passenger side fenders and driver side doors were harder to find. I guess that's how I ended up with all driver side fenders and passenger side doors

[special-K]

I might do another round of stripper on the 69-72 to show how good it is. Kinda ugly now.

Does anyone need door hinges? I'm going through my stuff and have some to get rid of.

[jimer1964]

Originally Posted by special-K

I might do another round of stripper on the 69-72 to show how good it is. Kinda ugly now.

Does anyone need door hinges? I'm going through my stuff and have some to get rid of.

Tim,looking for some drivers side to keep the door open when parked of course! How are you selling buy sets or individual? Ok let me know Thanks. Like the look of that one olive door with the yellow top! That's a cool color combination

[special-K]

Yeah, that olive with grapefruit combo is cool. I'll sell hinges individual. Let me see what I have

[cleszkie]

Originally Posted by special-K

I could strip to bare for more money. My purpose was to show condition, not prep for paint.

Man, you do some rough paint prep work. What did you use a rusty butter knife?

I'M JUST KIDDING!!! Friday bump for you.

[atog]

Tim could you take a video of all those hidden treasures ( including the ones that haven’t seen daylight in 20 years ) and send it to me at your convenience? I would like to get a little more computer savvy, and I figure doing some online shopping would be a great place to start. You could just Put everything in a corner with the NOS hubs. We can arrange pick up at a later date I realize this time of year your probably busy as can be during daylight hours, and I’m in no rush for video either. Later this evening would be ok.

[NJKelly]

I may need a passenger side quarter panel for a 72 Blazer. I think someon said you could take the truck bed quarters and cut them down to make them fit. If you have any let me know. Thanks

[special-K]

Originally Posted by cleszkie

Man, you do some rough paint prep work. What did you use a rusty butter knife?

I'M JUST KIDDING!!! Friday bump for you.

What do you mean? That's the paint job. It's called the got tired of patina then tired of paint prep look.

Originally Posted by atog

Tim could you take a video of all those hidden treasures ( including the ones that haven’t seen daylight in 20 years ) and send it to me at your convenience? I would like to get a little more computer savvy, and I figure doing some online shopping would be a great place to start. You could just Put everything in a corner with the NOS hubs. We can arrange pick up at a later date I realize this time of year your probably busy as can be during daylight hours, and I’m in no rush for video either. Later this evening would be ok.

I have my own YouTube channel. Which episode do you want, the first one? I know you and think you'd like what's in #37

Originally Posted by NJKelly

I may need a passenger side quarter panel for a 72 Blazer. I think someon said you could take the truck bed quarters and cut them down to make them fit. If you have any let me know. Thanks

Sorry, I don't have any bedsides to get rid of.

[NJKelly]

Thanks for getting back to me

[atog]

You tube? I can’t wait Text me the info I’ll be waiting patiently. Did ya send it yet? Still haven’t got it! Quit teasing or I’m telling

[davischevy]

I'm still waiting on the link to the you tube channel.

[special-K]

Had a guy stop by to pick up a few things last weekend.

[jimer1964]

Originally Posted by special-K

Had a guy stop by to pick up a few things last weekend.

Tim,You sold all this last weekend? I didn't know you had that kind of inventory! I would have been interested in some of those goodies!

[atog]

I sure hope that wasn’t my upper molding that was being used as a tie down

[Dustmaker65]

What in the world! That guy is leaving with all of that empty, unfilled room on that trailer! He has to be a quitter...lol

[robs71]

guess this is why i could not find you at the Macungie atca show.......wow that's a serious sale..congrats,,good to rotate the inventory sometimes..Did you sell that nos red steering wheel???

[davischevy]

Originally Posted by atog

I sure hope that wasn’t my upper molding that was being used as a tie down

I figured that was your rig hauling all that.

[special-K]

I'm pulling a lot of legs here. That was a few years ago and that's my buddy Jason's truck. I had a guy I know offer up all his parts and I put Jason onto it. This was when he dropped me off. I have no use for so many parts. That piece of upper molding straightened right out, and everything else I post from now on will be true!

I have guests coming this weekend. I need to go out and clean the yard up