Wayne valve cover, side cover an other pieces for 235 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**mr48chev** · 06-09-2018, 07:00 PM

NOT MINE.

I'' clarify that right off these aren't mine and I have no interest in the but for you guys running a pressure oiler 235 who are looking for goodies this is the mother load.

Polished Wayne valve cover, Polished Wayne side cover, Offenhauser 2 carb intake with what he said were fresh carbs and small chrome air cleaners plus a set of Fenton Headers. Price is 750 and I think that is more than honest.
His phone number is on the note that he posted. I told him that if anyone called off this post that they would tell him that Mr 48 Chev posted it. This is nice stuff and not junk drug out of a shed.

MARTINSR · 06-09-2018, 10:15 PM

Drooooool

Brian

tmoble · 06-09-2018, 10:22 PM

is there a link? where is this stuff? posted on CL somewhere?

**mr48chev** · 06-10-2018, 03:45 PM

I saw him at the Model A club's annual swap meet at the Yakima Fair grounds. No link no Craigs list. phone number and name in the last photo. He is just selling off some of his stuff he has decided he will never use.

I talked to him for a while and said one of you folks might be interested and asked if it was ok if I posted it. If you are interested call him and tell him you saw the photo here and I said to call and see if he still has it.

Jemezcrusher · 06-14-2018, 09:47 AM

Are they Wayne originals or the repops?

Divine 59 · 06-14-2018, 03:39 PM

Holy Moly!!!! That is a lot of good vintage speed stuffs.

**mr48chev** · 06-16-2018, 01:01 AM

Quote:

Originally Posted by Jemezcrusher

Are they Wayne originals or the repops?

I didn't ask but suspect repops. Everything looked too fresh. When you start adding up the pieces the price wasn't that bad.

The only car part I bought was a 49 Plymouth ribbed front bumper for my 48.
I had a real small shopping list but the bumper was one item on the list and I didn't expect to find it.

Volfandt · 06-16-2018, 09:12 AM

If I hadn't already installed some chrome cheapies on my freshly rebuilt 235 I'd jump all over those just for the Waynes.

06-09-2018, 07:00 PM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,715	Wayne valve cover, side cover an other pieces for 235 NOT MINE. I'' clarify that right off these aren't mine and I have no interest in the but for you guys running a pressure oiler 235 who are looking for goodies this is the mother load. Polished Wayne valve cover, Polished Wayne side cover, Offenhauser 2 carb intake with what he said were fresh carbs and small chrome air cleaners plus a set of Fenton Headers. Price is 750 and I think that is more than honest. His phone number is on the note that he posted. I told him that if anyone called off this post that they would tell him that Mr 48 Chev posted it. This is nice stuff and not junk drug out of a shed. Attached Images __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-09-2018, 10:15 PM	#2
MARTINSR Registered User Join Date: Dec 2000 Location: Boise, Idaho Posts: 6,003	Re: Wayne valve cover, side cover an other pieces for 235 Drooooool Brian __________________ 1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings"

06-09-2018, 10:22 PM	#3
tmoble Registered User Join Date: Feb 2009 Location: Glendale, Az Posts: 1,062	Re: Wayne valve cover, side cover an other pieces for 235 is there a link? where is this stuff? posted on CL somewhere?

06-10-2018, 03:45 PM	#4
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,715	Re: Wayne valve cover, side cover an other pieces for 235 I saw him at the Model A club's annual swap meet at the Yakima Fair grounds. No link no Craigs list. phone number and name in the last photo. He is just selling off some of his stuff he has decided he will never use. I talked to him for a while and said one of you folks might be interested and asked if it was ok if I posted it. If you are interested call him and tell him you saw the photo here and I said to call and see if he still has it. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

06-14-2018, 09:47 AM	#5
Jemezcrusher Registered User Join Date: Nov 2015 Location: Jemez Springs, NM Posts: 435	Re: Wayne valve cover, side cover an other pieces for 235 Are they Wayne originals or the repops?

06-14-2018, 03:39 PM	#6
Divine 59 Registered User Join Date: Sep 2011 Location: Austin, TX Posts: 307	Re: Wayne valve cover, side cover an other pieces for 235 Holy Moly!!!! That is a lot of good vintage speed stuffs. __________________ My Build Thread http://s95.photobucket.com/user/drop...?sort=3&page=1

06-16-2018, 09:12 AM	#8
Volfandt Registered User Join Date: Jan 2018 Location: Knoxville TN Posts: 87	Re: Wayne valve cover, side cover an other pieces for 235 If I hadn't already installed some chrome cheapies on my freshly rebuilt 235 I'd jump all over those just for the Waynes. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.